22 years focused on physical lab testing machines and provide total testing solution according customer requirement.

ShIP to

Constant temperature and humidity test chamber maintenance requirements

by:GESTER     2020-11-09
Constant temperature and humidity test chamber is relatively high, generally proposed placing it relatively good natural environment temperature, everyone's working experience in numerical 8 ℃ to 23 ℃, temperature of the laboratory does not have the conditions, be sure to configure a moderate amount of air conditioning or glass fiber reinforced plastic cooling tower. Adhere to the professional management personnel, conditional units shall regularly send personnel to go to learn specialized training, in order to get more professional maintenance and repair work experience and the ability to work. Fixed every 3 months clean the condenser of constant temperature and humidity test cases at a time: for compressor with air cooling, shall promptly repair cold yi fan and condenser for decontamination ash to ensure its good natural ventilation and heat transfer characteristics; To choose water-cooled radiator cooling compressor, except work must ensure that the water seepage pressure and water seepage temperature, also make sure the relative traffic, and on time to the condenser internal cleaning scale cleaning in order to obtain the heat transfer characteristics. Maintenance must clean the evaporator of constant temperature and humidity test chamber, on time for samples of each are not identical, clean level under the mandatory wind circulation system effect evaporator above collected a lot of dust and other small particulate matter, shall be carried out on time to clean. Circulatory system blades, similar to clean the evaporator condenser fan clean and balance, because of the constant temperature and humidity test chamber working environment each are not identical, circulatory system fan and condenser fan above many dust and other small particulate matter, shall be carried out on time to clean. If the constant temperature and humidity test chamber channel impeded, humidifier fouling is very easy to cause the humidifier empty to burn, is likely to destroy humidifier, therefore must be on time to waterways and the humidifier to carry out the washing. Stick to the end of each experiment set the temperature in the working temperature around, work in thirty minutes up and down and then disconnect switch power supply, and clean the personal work interior cavity. If the constant temperature and humidity test chamber to demolition is best carried out under the specific guidance of professional and technical personnel, in order to prevent causing unnecessary damage or destroy machinery and equipment. Long-term turned off when not in use should be on time every 10 days to product electricity, electricity time not less than 1 hour. The interpretation of the above is the constant temperature and humidity test chamber maintenance requirements, hope can help you, if you want to learn more about information of constant temperature and humidity test chamber, welcome to the online consulting service or call the company service hotline ( Website top right corner) For consultation, we will wholeheartedly provide high quality service for you! Tags: & nbsp  constant temperature and humidity test chamber
Using our GESTER to differentiate our content, services and consumer products, we seek to develop the most creative, innovative and profitable entertainment experiences and related products in the world.
Click GESTER for super quality from one of the state's premier producers.
While buying the products, make sure that you purchase them from a reputed and trusted seller - either online or offline. GESTER International Co.,Limited is specialised in the field of , offering a wide range of products like textile testing equipment, tensile tester manufacturers, tensile tester manufacturers,etc.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...