Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Summarize the relevant knowledge of the yarn tester
The variety of yarn testing instruments is very complete, such as capacitive evenness tester, photoelectric evenness tester, automatic single yarn strength tester, yarn defect classifier, twist tester, hairiness tester, count scale, etc., and some have reached International level. CT2000 automatic evenness tester can automatically test the evenness, hairiness and other indicators of 20 tubes of yarn, and can use the ^ analysis and diagnosis system to evaluate the test results, and point out the faulty parts of the equipment and the defects of the process parameter settings; the appearance of CTloOO yarn The analyzer uses a high-speed CCD camera to detect the yarn diameter from perpendicular to each other, and gives the average diameter, unevenness, ovality, defect and other indicators, and simulates the effect of the black sliver and the simulated fabric, and provides a comprehensive understanding of the yarn performance for textile enterprises. It helps a lot. The test performance of these two instruments are close to similar instruments from Uster. At present, there are 10 domestic manufacturers that can manufacture capacitive evenness testers. There are more than 30 manufacturers of single yarn strength testers. More than half of them have fully automatic tester products, and some have high-speed stretching functions. Strong machines suitable for chemical fibers and cords are also available in China. The maximum tensile strength can reach 500 N, and the elongation rate can reach 800%.
Most places have a few choices when it comes to tensile tester manufacturers textile testing equipment distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of textile testing equipment is critical to tensile tester manufacturers.
If you're interested in buying a of high quality and affordable price, let GESTER International Co.,Limited at GESTER Instruments be your guide to the best shopping experience.
If something seems too good to be true, then it can be a , which provides tensile tester manufacturers value over its cost.
The group's Quality Systems Manager (QSM) is responsible for ensuring that GESTER International Co.,Limited has in place systems that guarantee quality throughout the Group.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links