loading

Gester Instruments | Professional Textile Testing Equipment Manufacturers Since 1997


Test Standard
Test Standard

The friction between China and the United States has escalated, and the textile and garment industry has been affected again

On Tuesday, the U.S. government abruptly asked the Chinese government to close the consulate general in Houston within 72 hours and evacuate all personnel. More than four hours later, a fire broke out at the Chinese Consulate General in Houston. Witnesses said they saw a small amount of smoke rising from the embassy courtyard and smelled burnt paper. Based on the principle of foreign affairs sovereignty, the Chinese Consulate General in Houston did not allow personnel from the Houston Fire and Police Departments to enter. Subsequently, US State Department Spokesperson Morgan·Ortagus said in an emailed statement“reason”, saying that the closure of the Chinese Consulate General in Houston is for the so-called“Protect U.S. intellectual property and Americans' private information”. In response, the Chinese Ministry of Foreign Affairs notified the U.S. Embassy in China yesterday morning that China has decided to revoke the permit for the establishment and operation of the U.S. Consulate-General in Chengdu, and put forward specific requirements for the consulate-general to stop all business and activities. A Chinese spokesman said that the US unilaterally provoked the incident and suddenly asked China to close the consulate general in Houston, which seriously violated international law, the basic norms of international relations and the relevant provisions of the Sino-US consular treaty, and seriously damaged Sino-US relations. The above-mentioned measures by the Chinese side are a legitimate and necessary response to the unreasonable actions of the US side, and are in line with international law and basic norms of international relations, as well as diplomatic practice. The current situation between China and the United States is something China does not want to see, and the responsibility lies entirely with the United States. We once again urge the US to revoke the erroneous decision immediately and create necessary conditions for the relationship between the two countries to return to normal. This year, the United States has taken various repressive measures against China in terms of military, regional geopolitics, science and technology, and personnel exchanges. Especially the recent series of“honey juice”The operation makes people have to think that the Sino-US trade may deteriorate again. On July 16, it was reported that the United States was considering a complete ban on the travel of relevant personnel to the United States. The Trump administration is considering a blanket ban on Chinese Communist Party members and their families from traveling to the United States, according to people familiar with the matter. In response, Chinese Foreign Ministry spokesperson Hua Chunying responded on the 16th that if the report is true, it can only make people feel that the United States“sad”. On July 20, the U.S. Department of Commerce’s Bureau of Industry and Security (BIS) announced the addition of 11 Chinese companies“Entity List”, which involves 3 textile enterprises of Changji Esquel Textile, Hetian Taida Garment, and Nanjing Xinyi Cotton Textile Printing and Dyeing. This will lead to new restrictions on access to U.S.-origin goods for these companies. It is reported that,“Entity List”It is an export control regulation established by the United States to safeguard its national security interests. U.S. exporters are prohibited from assisting companies on these lists to obtain any items subject to this regulation without obtaining a license. The Entity List is a tool used by the Bank for International Settlements to restrict the export, re-export and (in-country) transfer of items subject to the Export Administration Regulations (EAR) to individuals (individuals, organizations, companies) who reasonably believe involve or pose a significant risk , engaging in activities contrary to U.S. national security or foreign policy interests. Additional license requirements apply to the export, re-export, and (domestic) transfer to a listed entity of items subject to the EAR, and the availability of most license exceptions is limited. general speaking,“Entity List”just one serving“blacklist”, once entering this list is actually depriving related companies of trade opportunities in the United States. Professional analysis, even if the client is listed in the United States“Entity List”, as long as the subject matter of the transaction is not in the restricted area, you can continue to cooperate with these customers, regardless of the entity list and export controls. At the same time, the Office of the United States Trade Representative (USTR) recently announced a new list of exemptions from additional tariffs. This is the seventh batch of excluded products in the US$300 billion list of additional tariffs announced by the United States, involving cotton knitted women’s gowns, boot racks, plastic shells, foam pads, baby clothes and baby sleeping bags, men’s and women’s bathrobes, blankets, ovens A total of 64 products such as gloves. In addition, the US demanded to close the Chinese Consulate General in Houston this week, which led to a tense situation in Sino-US relations, which was even called China-US by some media.“cold war”. This is an unprecedented escalation action by the US against China, which further pushes the Sino-US trade relationship into a negative direction. At present, with the rapid development of my country's economy and the growing middle class, the ability to accept and digest high-end textiles and clothing has been greatly enhanced, and the dependence on the US market and the impact of policy changes have been fully alleviated. However, textile and garment enterprises still need to be vigilant and deploy emergency measures as soon as possible to prevent them from being affected by the Sino-US trade friction again.

GET IN TOUCH WITH Us
recommended articles
Bally Leather Flexing Tester GT-KC10A Assembly Guide
This comprehensive guide provides detailed instructions for the proper assembly, calibration, and operation of the Bally Leather Flexing Tester GT-KC10A. Essential for quality control labs, it ensures accurate testing of flex resistance in leather, coated fabrics, and textiles used in footwear uppers, helping to prevent material failure.
ISO 17694 / ISO 5402-1: Footwear Flexing Resistance Test Methods
Footwear soles and uppers endure thousands of flex cycles during use, risking premature cracking, delamination, or chipping if material resistance is inadequate. This technical analysis details two critical international standards:

1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.

2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.

C
Analysis of Pilling Influencing Factors and Testing Methods
Pilling testing plays a vital role in textile quality control, helping manufacturers evaluate and improve the wear performance of fabrics. Through the use of advanced instruments like ICI Pilling Box Test Method (GT-C18) , Martindale Abrasion Test Method (GT-C13B) , and Random Tumble Pilling Test Method (GT-C19A) , laboratories can conduct precise and standardized assessments, ensuring that final textile products deliver superior appearance, comfort, and longevity.
Shoe Steel Shank Bending Resistance Tester: Everything You Should Know
The Shoe Steel Shank Bending Resistance Tester is a pivotal tool in the footwear industry, designed to assess the strength and flexibility of steel shanks. These components, integral to footwear integrity, undergo rigorous testing to ensure durability and safety. This guide explores the tester’s functionality, advantages, and key operational steps, emphasizing its value for manufacturers committed to delivering high-quality, reliable products.
How to Know the Fabric Shrinkage Test for Your Projects
Master fabric shrinkage testing with this definitive guide. Understand causes of shrinkage, industry standards (ISO, GB, AATCC), step-by-step testing methods using Wascator equipment, and strategies to minimize shrinkage for superior garment quality and customer satisfaction.
Shoes & Leather - Guangzhou 2025: GESTER Showcased Footwear testing Equipment on Site
GESTER impressed at Shoes & Leather Guangzhou 2025 by exhibiting high-precision footwear testing equipment like the DIN Abrasion Tester and Bally Flexing Tester, essential for quality control in shoe production. The event fostered industry collaboration, with GESTER attracting global buyers and strengthening partnerships.
Leather Physical Properties Testing Guide
This guide details the 9 critical physical property tests essential for assessing leather quality: Tensile Strength, Tear Strength, Abrasion Resistance, Thickness, Water Vapor Permeability, Water Resistance, Shrinkage Temperature, Color Fastness to Friction, and Bending Strength. It covers the testing scope (natural leather, synthetic leather, finished products, semi-finished goods) and introduces specialized testing equipment required for each method (e.g., Universal Testing Machine, Elmendorf
Box Compression Tester GT-N02B: The Key to Accurate Determination of Packaging Compression Strength
The GT-N02B Box Compression Tester is a high-precision machine designed to evaluate the compressive strength of cartons and packaging materials. With advanced motor control, fast operation, and multi-functional testing capabilities, it ensures reliable results for quality assurance in manufacturing and logistics.
Cobb Test Paper Absorption Tester GT-N07 - A Comprehensive Guide
The Cobb Test Paper Absorption Tester GT-N07 is an essential instrument for evaluating the water absorption properties of paper and paperboard materials. This test, commonly known as the Cobb method, helps determine how much water paper can absorb over a specified time under controlled conditions—crucial for assessing its suitability in printing, packaging, and coating applications.
What Are the Types of Color Fastness Testing for Fabrics?
Color fastness testing evaluates how well fabrics resist fading or bleeding under conditions like washing, rubbing, light exposure, and perspiration. Key tests include rubbing fastness, washing fastness, light fastness, perspiration fastness, and sublimation fastness. These tests ensure textiles maintain color integrity, prevent health risks, and meet quality standards. Learn about different testing methods and equipment used in the textile industry.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect