Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
What maintenance work needs to be done when using the material testing machine
This kind of testing machine adopts hydraulic afterburner, liquid crystal display for force measurement, and the design of the main body and the dynamometer is separated. It has the characteristics of convenient operation, stable and reliable work, and stable loading. However, if you want to maintain the original state, Also need to do some maintenance work in use. Material testing machine maintenance: 1, keep it tight. Textile instrument manufacturers introduced that during the use of the material testing machine, because the vibration during the test is prone to loosening, the relevant parts should be tightened after the material testing machine has been used for a period of time. 2. The use of hydraulic oil. In hydraulic rotation, N68 precision machine tool hydraulic oil can be used, or other similar specifications of oil can be used, with a kinematic viscosity of 11-14 centistokes (100°C). Connect the oil pipe. When installing the oil pipe connecting the main body and the dynamometer, the inside of the oil pipe should be cleaned with kerosene to ensure the cleanliness of the oil circuit. Attention should be paid to the integrity of the gasket at the joint to prevent oil leakage under high pressure. 3. Material testing machine maintenance: the use of lubricating oil. Lubricating oil can be poured on the screw of the lower jaw to lubricate the screw and the screw nut. There is an oil filling hole on the base, which is used to inject the oil into the oil to lubricate the worm. As measured by the oil needle, the maximum oil level of the oil stick does not exceed the lower flat part of the oil needle. The lower end of the oil stylus is the lowest oil level in the oil stick. 4. Filling and draining oil. Textile instrument manufacturers introduced to open the air filter on the fuel tank, fill the fuel tank with oil, and the amount of fuel injected at one time is about 24 kg. Please refer to the manual for the specifications of the oil used. When draining the oil, just open the oil nipple at the bottom of the left side of the dynamometer. The service life of the oil is determined according to the climate of each place. If the oil is found to deteriorate or become dirty, the oil should be replaced.
The textile testing equipment approach to tensile tester manufacturers is becoming increasingly popular; consequently, there is a surge in the demand for .
GESTER International Co.,Limited is committed to attracting, developing, and keeping a diverse work force that reflects the nature of our global business.
tensile tester manufacturers textile testing equipment may be adapted for use at any tensile tester manufacturers and is suitable for tensile tester manufacturers.
The group's Quality Systems Manager (QSM) is responsible for ensuring that GESTER International Co.,Limited has in place systems that guarantee quality throughout the Group.
1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.
2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.
C
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links