Applicable Standards for Pneumatic Fabric Burst Strength Tester
Pneumatic fabric burst strength tester is used to detect bursts including textiles: woven, knitted, non-woven, paper or board, non-woven, paper, plastic, cardboard, packaging materials, diaphragms or boards and medical products, etc. strength and height. It is an indispensable equipment for testing the bursting strength of test paper, corrugated cardboard and textiles. Test principle: The sample is clamped on the extensible diaphragm by a circular gripper, and gas pressure is applied under the diaphragm to expand the diaphragm and the sample, and the pressure is increased at a constant speed until the sample ruptures. The bursting strength and bursting expansion are obtained. Features of the instrument: A. Complies with the maximum test area of 100cm2 B. The clamping force is uniform, and can be applied to all kinds of materials in all directions C. Supports online communication D. The experimental area can be replaced to meet the requirements of different standards E. It can be stored from The definition standard is 50 F. The test results are rich in expressions such as: bursting strength, bursting strength, diaphragm pressure, bursting height, bursting time; it is convenient for quality control personnel to fully understand the bursting performance of the sample. G. Automatic detection of safety cover, which can automatically correct and eliminate the influence of the film itself on the results. Technical parameters: A. Pressurization method: air pressure method B. Range range: 0-1000kPa, accuracy: 0.2% C. Lower clamping ring: 7.3cm 7.8cm 10cm 50cm 100cm? D. Maximum expansion: 70±0.02mm E. Pressurization rate: 1-100kPa/min, adjustable speed F. Output form: print output, display output, real-time color graphic display G. Power supply: AC220V 50Hz 2000W Instrument configuration: 1. One host 2. Down A set of clamping rings (5 pieces) 3. 1 pack of bursting film 4. 1 silent air pump Applicable standards: GB/T 7742, FZ/T 60019, ISO 13938.2, NEXT TEST METHOD 22-2006, WOOLMARK TM29-2000, EDANA 80.3-99, ISO 2758, ASTM D3786, JIS L108, etc.
Given the important role played by in ensuring proper functioning of tensile tester manufacturers, every individual must take an interest towards improving tensile tester manufacturers.
We would like to offer our comprehensive service to our customers who interested in textile testing equipment.
Among improvements to textile testing equipment, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.
2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.
C
Quick links
Products