loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

Carbon nanospheres improve potassium battery performance

Chinese researchers have discovered a new way to synthesize hollow carbon nanospheres and used the carbon nanospheres to create a potassium-ion battery that is a cheaper alternative to lithium-ion batteries. Cao Anmin, an expert from the Chinese Academy of Sciences, explained that hollow carbon nanospheres hold great promise in energy storage, catalysis and biomedicine. While traditional methods for preparing hollow carbon structures require hard templates, harmful chemicals such as sodium hydroxide or hydrofluoric acid, this new method is an efficient stand-alone process. Cao Anmin's team found that the growth of nanospheres could be controlled with polymeric resins, at 1200°Converted to the final hollow carbon product after carbonization in a C oven. Schematic source of the different evolution paths of hollow carbon nanostructures: The American Journal of Chemistry Chinese team prepared nanospheres with both mesoporous and ordinary surface properties by different synthetic methods. Researchers can observe the internal structure of hollow carbon nanospheres through transmission electron microscopy. Prof. Cao explained: The electron beam penetrates the particles, and the shadows and blanks appearing correspond to the particle entities and holes, respectively. Prof. Cao and his team used these nanospheres as high-capacity anodes in potassium-ion batteries. According to Prof. Cao, the hollow-structured samples should alleviate the problems caused by the accumulation of large amounts of potassium ions on the electrodes. Prof. Cao explained: Due to the abundance of potassium resources, potassium-ion batteries will be a good choice for battery development, and at the same time, potassium-ion batteries can theoretically provide a higher voltage output. Karin Kleiner, a battery researcher at Diamond Light Source in Oxford, points out that potassium-ion-based batteries may not enter the consumer market anytime soon. Nonetheless, she also mentioned that Prof. Cao's use of nanospheres as a new cathode material will increase the energy density of the battery system, thus having greater advantages over traditional lithium-ion batteries, providing great potential for research. Kleiner also explained how amorphous carbon enters each electrode and increases its kinetic tendency. If it can prove that nanospheres have advantages, there will be huge market development potential. The Chinese team found that the three-layered nanospheres were more stable and greatly increased the battery capacity. But Professor Cao also said: Although our battery has good stability and large capacity, our sample also has a big problem of low Coulomb efficiency. They are currently working on this problem and hope to have a breakthrough soon. The original text is from chemistryworld, the original title: Carbon nanospheres power up potassium batteries, translated and arranged by the material science and technology online team.

GET IN TOUCH WITH Us
recommended articles
Understanding Universal Tensile Testing machine: Feature, Operation
Discover how universal testing machines perform tensile, compression, bending, and peel tests on metals, plastics, rubber, and composites. Features include servo motors, 0.001mm resolution, RS232 data, and safety systems. Step-by-step operation guide included.
Understanding 3 Positions DIN Abrasion Tester : A Comprehensive Guide
This comprehensive guide explains the 3-Position DIN Abrasion Tester, a rotary drum instrument simulating real-world wear to quantify material abrasion resistance. Learn its working principle (mass/volume loss measurement under controlled friction), key features (touch-screen control, automated dust cleaning), and applications across rubber, tires, footwear, and conveyor belts. Discover compliant standards (DIN 53516, ISO 4649, ASTM D5963), step-by-step operation procedures, and essential mainte
Why is TPP Testing Important for Firefighter Protective Clothing
TPP testing objectively evaluates the thermal protective performance of firefighter protective clothing under extreme radiant and convective heat. This article explains TPP testing principles, its role in meeting NFPA/ISO standards, and how advanced equipment like the GT-RC02 TPP tester helps ensure clothing reliability and firefighter safety.
How to Test Firefighter Turnout Gear Thermal Protection?
Firefighter turnout gear plays a critical role in protecting firefighters operating in extreme environments involving high temperatures, flames, radiant heat, and convective heat. Its thermal protective performance directly affects firefighter safety and survival during fireground operations. This article explains how to test firefighter turnout gear thermal protection through Thermal Protective Performance (TPP) testing. It introduces the scientific principle based on the Stoll curve, outlines key influencing factors such as heat flux intensity and exposure time, and reviews internationally recognized standards including NFPA 1971 and ISO 17492. The article also highlights the testing advantages of the GT-RC02 TPP Thermal Protection Tester, which provides accurate, stable, and standards-compliant evaluation of flame-retardant protective clothing materials under combined radiant and convective heat exposure.
Cobb Test Paper Absorption Tester GT-N07 - A Comprehensive Guide
The Cobb Test Paper Absorption Tester GT-N07 is an essential instrument for evaluating the water absorption properties of paper and paperboard materials. This test, commonly known as the Cobb method, helps determine how much water paper can absorb over a specified time under controlled conditions—crucial for assessing its suitability in printing, packaging, and coating applications.
Four Color Fastness Test Method for Laboratory Drying Oven
GESTER’s laboratory drying oven is designed for textile color fastness testing, including perspiration, seawater, water, and saliva resistance. Compliant with ISO, AATCC, GB, and JIS standards, it ensures precise heating and drying for accurate test results. Learn the step-by-step four color fastness test method and its applications.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
Exploring Taber Abrasion Tester GT-C14B: The Go-To Equipment for Precision Abrasion Test
The Taber Abrasion Tester GT-C14B is a high-precision instrument designed to evaluate the wear resistance of flat materials, including coatings, plastics, textiles, and automotive components. With adjustable speed, load configurations, and multiple abrasive media, it ensures accurate testing for industries like furniture, automotive, packaging, and dental materials.
Box Compression Tester GT-N02B: The Key to Accurate Determination of Packaging Compression Strength
The GT-N02B Box Compression Tester is a high-precision machine designed to evaluate the compressive strength of cartons and packaging materials. With advanced motor control, fast operation, and multi-functional testing capabilities, it ensures reliable results for quality assurance in manufacturing and logistics.
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect