Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Products
PPE Testing Equipment
TPP Thermal Protection Tester
Heat Radiation Tester
Heat Contact Machine
Heat Transmission Resistance Tester
Against Molten Metal
Electrostatic Charge Attenuation Tester
Dry State Lint Tester
Blood Penetration Resistance Tester
Sweating Guarded Hot Plate
Impact Penetration Tester
Dry Microbial Penetration Resistance Tester
Wet-resistant Bacterial Penetration Tester
Static Decay Tester
Fabric Friction Electronic Charge Density
Universal Test Machine
Tensile Test Machine
Martindale Tester
Humidity Test Chamber
Common problems and solutions of American standard washing machines
2021-07-26
Gester Instruments
286
Common problems, possible causes and solutions. The machine shakes too much during washing. The machine is not stable. Check the ground and feet to ensure that the machine is properly placed. The washing machine is not level. Adjust the level of the machine according to the installation guide. The sample is too tight. Noise The dehydration process will have a lot of noise, but it is a normal phenomenon. The load sensing system will work for a few minutes before the washing starts. Water leakage. Connection problem. Is the connection of the water inlet and the water outlet normal? Is it normal that the washing machine can’t work or can’t inject water to supply water? Check whether the water valve connection is normal, cold, and hot water connections should be turned on. Power supply connection, ground wire connection, do not use the extension cord. Please do not add other samples after the start of the washing procedure to avoid unbalanced operation of the inner tank. Dehydration failure. Increase the dehydration rate appropriately. The sample is too tight or unbalanced. Adjust the sample to avoid too much sample, too tightly wrapped detergent Reduce the amount of detergent more appropriately to remove excess foam. Source: Standard Group (Hong Kong) Co., Ltd.
GET IN TOUCH WITH Us
recommended articles
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
GESTER’s laboratory drying oven is designed for textile color fastness testing, including perspiration, seawater, water, and saliva resistance. Compliant with ISO, AATCC, GB, and JIS standards, it ensures precise heating and drying for accurate test results. Learn the step-by-step four color fastness test method and its applications.
Ensure textile durability with the GT-C12A Fabric Bursting Strength Tester, a pneumatic testing device for woven/knitted fabrics, nonwovens, paper & leather. Compliant with ISO, ASTM, & JIS standards, it offers precise digital readings, automatic sensing, and intelligent software for quality control. Discover how this tester improves material performance & prevents defects in production.
GESTER impressed at Shoes & Leather Guangzhou 2025 by exhibiting high-precision footwear testing equipment like the DIN Abrasion Tester and Bally Flexing Tester, essential for quality control in shoe production. The event fostered industry collaboration, with GESTER attracting global buyers and strengthening partnerships.
GESTER successfully participated in Shoes & Leather Vietnam 2025 (July 9-11), showcasing cutting-edge footwear testing machines. Visitors explored equipment like the Bally Resistance Flexing Tester and Martindale Abrasion Tester, with many expressing strong collaboration interest. Learn more about GESTER’s innovative solutions for the footwear industry.
GESTER specializes in R&D and production of advanced textile testing equipment, covering fabric, yarn, color fastness, and flammability tests. Our UK client visit highlights our commitment to quality, customization, and efficient service, reinforcing trust for long-term partnerships.
A hydrostatic head tester evaluates the waterproof capability of textiles, automotive interiors, and industrial materials. This guide covers its working principle, core components, global test standards (ISO, AATCC, EN), and a detailed testing procedure to ensure accurate results.
The global leather and footwear industry is shifting toward prioritizing durability, material integrity, and functional excellence—driving demand for high-precision testing equipment. As a highlight of ACLE 2026 (All China Leather Exhibition), GESTER International Co., Ltd., a 25+ year footwear testing equipment factory, showcases innovative solutions tailored to this trend. Trusted by leading testing institutes like SGS, TUV, and Intertek, GESTER’s product lineup includes the Martindale Abrasion Tester (for surface durability), Tension Testing Machine (for mechanical properties), and Safety Shoe Cutting Tester—all compliant with ISO, ASTM, and EN standards. These instruments integrate automation (PLC systems) and data traceability to reduce human error, support ISO 9001 compliance, and streamline laboratory efficiency. With a global service network spanning 160+ countries, GESTER offers on-site installation, calibration, and software updates to ensure long-term usability. The article also outlines strategic procurement tips for manufacturers, emphasizing modular design, standard compatibility, and supplier track records. For leather and footwear brands seeking to enhance product reliability, avoid recalls, and stay competitive, GESTER’s ACLE 2026 innovations and end-to-end support provide a definitive quality assurance solution.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Quick links
Contact us
Mobile/Whatapp/ Wechat:
+ 86 018059983973
Address: Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and Technological development zone quanzhou of fujian.China.
Friendly Links: Physial Testing Instruments And Equipments
Contact us
Leave your inquiry, we will provide you with quality products and services!
Customer service