Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Greenhouse effect is imminent, monitoring standards help energy conservation and emission reduction
In the process of human reproduction and evolution, human beings have long been accustomed to burning coal and petroleum-based fossil energy to obtain electricity, heat and other energy sources. And with the development of social industrialization, human beings have burned coal, oil and natural gas too much in the industrial society. After the combustion of these fuels, a large amount of carbon dioxide gas is released into the atmosphere, making the greenhouse gas with strong heat absorption increasing year by year. The greenhouse effect has also increased, which has caused a series of problems that have attracted the attention of all countries in the world. Speaking of the greenhouse effect, everyone must be familiar with the greenhouse effect, also known as the greenhouse effect.“flower room effect”, is the common name for the thermal insulation effect of the atmosphere. The atmosphere can make the sun's short-wave radiation reach the ground, but a large amount of long-wave thermal radiation released by the surface after being heated is absorbed by the atmosphere, which increases the temperature of the surface and the lower atmosphere. The greenhouse for cultivating crops is called the greenhouse effect. In recent years, the impact of the greenhouse effect on the environment is obvious. The most direct impact is global warming. Experts say that if the global temperature continues to rise, the melting of glaciers will happen sooner or later. The impact of coastal lands should not be underestimated, and coastal land area reduction, intensified coastal erosion, flood disasters, submerged towns, and saltwater intrusion will all be the most direct impacts. Moreover, melting Arctic icebergs will release large quantities of toxic chemicals that are trapped and trapped in ice and cold water, a fatal blow to life on Earth. Therefore, energy conservation and emission reduction are imminent. From the 75th United Nations General Assembly in September 2020 to the recently concluded National Two Sessions, half a year,“carbon neutral”From an unfamiliar professional word to a high-frequency hot word. A few days ago, organized by the Ministry of Science and Technology, the“The choice of scientific and technological innovation path for carbon neutrality”The S60 Xiangshan Science Conference on the theme of carbon peaking and carbon neutrality scientific and technological innovation conducted in-depth discussions. Relevant experts also said that in order to cope with the climate crisis and alleviate the phenomenon of global warming, achieve“China's carbon dioxide emissions are striving to peak by 2030 and to achieve carbon neutrality by 2060”The goal and commitment of the company requires the joint efforts and supervision of all sectors of society, and also requires strict control of CO2 emissions. In order to unify the detection standards of CO2 and regulate the chaos in the industry, my country has issued many standards for the greenhouse effect and global warming. ) proposed by the China Petroleum and Chemical Industry Association, which specifies the gas chromatographic method for the determination of carbon monoxide, carbon dioxide and hydrocarbons in gases, suitable for carbon monoxide, carbon dioxide and methane in gases such as hydrogen, oxygen, helium, neon, argon, krypton and xenon The sub-determination of carbon monoxide, carbon dioxide and hydrocarbons (total carbon) determination. 'Atmospheric Carbon Dioxide (CO2) Optical Cavity Ring-down Spectroscopy Observation System' (GB/T 34415-2017); 'Greenhouse Gas Methane Measurement Off-Axis Integral Cavity Output Spectrometry' (GB/T 34287-2017); 'Greenhouse Gas Carbon Dioxide Measurements' Off-axis Integrating Cavity Output Spectrometry' (GB/T 34286-2017); 'Online Observation Method for Background Atmospheric Carbon Dioxide and Methane Concentrations by Gas Chromatography' (GB/T 31705-2015), etc. all stipulate monitoring at the national level standard to achieve the purpose of uniform specification. The setting of these testing standards not only regulates the market and unifies monitoring requirements for my country's energy development, but also brings a series of economic effects. I also hope that relevant instrument manufacturers in my country can seize business opportunities. Show your strengths and develop yourself, but also contribute to my country's environmental protection cause!
To that end, GESTER International Co.,Limited has successfully built a solid foundation and infrastructure for textile testing equipment manufacturing.
Crazy about products? GESTER International Co.,Limited is the place you must shop at, do visit GESTER Instruments to check out our latest collections!
GESTER International Co.,Limited emphasizes our commitment to quality in our laboratory and R&D services.
With a complete manufacturing plant, GESTER International Co.,Limited is able to meet the most stringent specifications, no matter the type of product. A dedicated team of experts handle these value-added services, ensuring that customer needs are met on time, consistently monitoring quality and performance of textile testing equipment to the highest international standards. Visit GESTER Instruments to learn more.
GESTER International Co.,Limited is a new company that provides expertise in search marketing solutions for business on a worldwide basis.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links