Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Products
PPE Testing Equipment
TPP Thermal Protection Tester
Heat Radiation Tester
Heat Contact Machine
Heat Transmission Resistance Tester
Against Molten Metal
Electrostatic Charge Attenuation Tester
Dry State Lint Tester
Blood Penetration Resistance Tester
Sweating Guarded Hot Plate
Impact Penetration Tester
Dry Microbial Penetration Resistance Tester
Wet-resistant Bacterial Penetration Tester
Static Decay Tester
Fabric Friction Electronic Charge Density
Universal Test Machine
Tensile Test Machine
Martindale Tester
Humidity Test Chamber
How about the ODM service flow?4
2022-05-21
Gester Instruments
310
At GESTER International Co.,Limited, there are four steps for ODM manufacturing. It starts with communication between you and our engineering team. Our engineering team will discuss, advise on, and confirm the design details with you. And then we will produce pre-production samples for your further confirmation of product design as well as quality. After the sample is approved, it is about to go into mass production. The last step is the quality inspection. Before delivery, we will check and test the product quality and performance to ensure you only receive qualified products.
Gester Instruments is doing well in offering superb yarn testing equipments. The yarn tester series has become a hot product of Gester Instruments. Gester Instruments Instruments Low Temperature Flexing Tester meets the highest appliance standards. It has passed tests in terms of voltage compatibility, electromagnetic safety, frequency stability, and plug safety. The product is widely accepted for its abrasion resistance. As a result of the implementation of a complete quality management system, products meet the most stringent quality standards. Its surface is not to get rusty.
The successful implementation of an environmental management system has enabled us to significantly reduce the environmental impact of the business. We will continue to make our business activities be more environmental-friendly.
GET IN TOUCH WITH Us
recommended articles
The A+A International Trade Fair in Düsseldorf serves as the global hub for occupational safety and PPE innovation, where GESTER—an industry leader with over 20 years of R&D experience—shines as a top safety helmets tester company. This article explores the evolving global safety standards (ISO, ASTM, EN, ANSI) driving demand for advanced testing equipment, and highlights GESTER’s high-precision solutions for impact absorption, penetration resistance, and flame resistance testing. With ISO 9001 certification, computerized automation, real-time data capture, and a comprehensive global support framework (on-site installation, calibration, OEM/ODM services), GESTER empowers PPE manufacturers and laboratories to meet rigorous compliance requirements. The company’s presence at A+A underscores its commitment to bridging innovative PPE design with reliable safety validation, helping businesses accelerate time-to-market while ensuring worker protection worldwide.
The Elmendorf Tearing Strength Tester GT-C11A is a pivotal instrument for evaluating the tearing resistance of various materials, including textiles, non-wovens, paper, and films. Utilizing the proven pendulum method, it delivers precise, repeatable data crucial for quality assurance, product development, and compliance with international standards like ASTM and ISO. This article explores its working principle, key features such as automated testing and pneumatic clamping, and its wide-ranging applications across multiple industries, highlighting why the GT-C11A is a trusted choice for professionals seeking reliable and efficient material performance analysis.
In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.
The Taber Abrasion Tester GT-C14B is a high-precision instrument designed to evaluate the wear resistance of flat materials, including coatings, plastics, textiles, and automotive components. With adjustable speed, load configurations, and multiple abrasive media, it ensures accurate testing for industries like furniture, automotive, packaging, and dental materials.
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
Discover actionable strategies to enhance the drop dart impact strength of plastic films for packaging, agriculture, and construction. Learn how material selection, additives, processing, and rigorous ASTM/ISO drop dart impact testing ensure product durability and prevent failure.
Fabric bursting strength measures resistance to rupture under concentrated load. Three primary test methods are used:
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Quick links
Contact us
Mobile/Whatapp/ Wechat:
+ 86 018059983973
Address: Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and Technological development zone quanzhou of fujian.China.
Friendly Links: Physial Testing Instruments And Equipments
Contact us
Leave your inquiry, we will provide you with quality products and services!
Customer service