Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Ozone aging test method and result judgment1
Experimental significance The content of ozone in the atmosphere is very small, but it is the main factor for rubber cracking. Therefore, the ozone conditions in the atmosphere are simulated and strengthened in the test environment, and the effect of ozone on rubber can be studied. The law can quickly identify and evaluate the resistance of rubber to ozone aging. Performance and anti-ozonant protective effect, and then take effective anti-aging measures to improve the service life of rubber products. Basic knowledge about ozone Ozone is a light blue and fishy gas at room temperature and pressure. The molecular formula is O3, It has strong oxidizing ability and bactericidal properties. Ozone is very oxidizing, and ozonated air is corrosive to almost all metals except gold and platinum. Aluminum, zinc and lead will be strongly oxidized in contact with ozone, but chromium-containing ferroalloys are basically not corroded by ozone. Ozone also has a strong corrosive effect on non-metallic materials. In ozone generating equipment, ordinary rubber cannot be used as sealing material, and silicone rubber or acid-resistant rubber with strong corrosion resistance must be used. The test method simulates and strengthens the ozone conditions in the atmosphere. The samples are exposed to air containing a constant ozone concentration and a constant temperature test chamber, and the cracks of the samples are checked at a predetermined time. Test Equipment Ozone Aging Test Chamber Test Principle The sample is exposed to a test chamber with constant ozone concentration and constant temperature, and the cracking of the sample is checked at a predetermined time. The following three methods can be selected: A. After exposure for a specified time and a specified strain, check whether there is cracking, and determine the degree of cracking if necessary. B Under an arbitrary predetermined tensile strain, the earliest cracking time is measured. C For any specified exposure time, the critical strain is determined. Test standard GB 7762-03, DIN53509-1, ISO1431/1 Vulcanized or thermoplastic rubber Ozone crack resistance test item Test conditions Ozone concentration pphm: 25, 50, 100, 200, 500, 1000 Test temperature ℃ 40±2 (Other temperatures can be selected, but can not exceed 60) elongation 20% (other elongations can also be used) The sample is installed and the sample is placed in an ozone-free dark room at standard temperature for 24-48h after stretching. The sample state adjustment test piece is placed in an ozone environment for 15 minutes after installation. 2. Rubber material requirements and tests 8.1 Rubber project test conditions Ozone concentration ppm test temperature ℃ 25±3. The sample is installed in the use state or similar installation state, and a certain load is specified for some parts, such as: storage around a 30mm radius for special profiles;≤The 5mm profiled material is stretched by 20%-25% with a fixture or tested around a circular column with a radius of 5 times the thickness of the sample. Sample state adjustment The test piece is placed in an ozone environment 15 minutes after installation.
Look at the trends, both economic and consumer, for indications on your GESTER International Co.,Limited's staying power.
If you are looking for tensile tester manufacturers textile testing equipment, we have plenty of them in our store. We have tensile tester manufacturers and many others. Visit GESTER Instruments to know more.
The value you get from watching how GESTER International Co.,Limited operates and runs our company and the potential mentorship you would get from us will go a long way towards helping customers understand our company.
Getting textile testing equipment from an idea to production is a complex process. It involves significant research, time, planning and patience. But with the right information, the right resources and the right product, it's possible.
There are multiple advantages of having a tensile tester manufacturers textile testing equipment from responsible drilling machine exporters such as GESTER International Co.,Limited, as they adhere to all the quality standards as you can list and supply all tensile tester manufacturers essential for the operation of the device without any difficulty.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links