The basic requirements that the calibration of the furniture tester needs to meet
Guide: Under normal circumstances, the calibration of the furniture tester needs to meet the basic requirements of environmental conditions. If the calibration is performed in the verification room, the environmental conditions should meet the temperature and humidity requirements of the laboratory. If the calibration is carried out on site, then the environmental conditions must be able to meet the conditions for the on-site operation of the instrument and equipment. The other two basic requirements are equipment and personnel. As a standard furniture tester used for calibration, its error limit should be one-third to one-tenth of the error limit of the calibration meter. Although calibration is not the same as verification, the person performing the calibration also needs to undergo a valid assessment and obtain a corresponding certificate of conformity. Only the certificate holder has issued a calibration certificate and a calibration report, and only such certificates and reports can be used. It is considered effective. What are the differences between the calibration and verification of the furniture tester? In fact, calibration and verification are two completely different concepts, but there are some closer connections between the two. Calibration is usually used to compare the measuring instrument with higher accuracy than the calibrated measuring instrument (also called standard instrument) and the calibrated measuring instrument, so as to determine the indication error of the calibrated measuring instrument. Sometimes it also includes the measurement performance of part of the meter, but generally the measuring instrument that is calibrated only needs to determine the error of the indication. If the calibration is the verification content of the indication error in the verification work, then the standard can be said to be part of the verification work, but the calibration cannot be regarded as the verification, and the requirements of the calibration are not as strict as the verification. The calibration work can be in production. On-site, but the verification can only be performed in the verification room. Some people understand calibration as the process of adjusting the measuring instrument to the specified error range. This is simply not accurate enough. Although the furniture tester can be adjusted during the calibration process, adjustment is not equal to calibration. Related recommendation: Adjust the industry structure of the furniture tester to improve the industry standard
GESTER International Co.,Limited is a gaint manufacturer of textile testing equipment, which is one of the most outstanding product produced from us.
GESTER International Co.,Limited is one of China's biggest providers in the following categories of products: textile testing equipment, tensile tester manufacturers, tensile tester manufacturers,etc. We also welcome ODM and OEM orders, and offer the highest standards of service, the cheapest deals, and the best buying experience. Get to know us at GESTER Instruments.
We are professional in manufacturing textile testing equipment, and always emphasize the technology and quality during the producing procedure.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links
Products