Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
The scale of demand in my country's environmental protection industry in 2018
In the first three quarters of 2017, the environmental protection industry achieved operating income of 57.349 billion yuan, a year-on-year increase of 25.89%; realized a net profit of 7.903 billion yuan, a year-on-year increase of 24.96%; revenue and net profit growth both increased slightly compared with the same period in 2016. The industry's annual net profit growth rate is expected to be maintained at about 25%, which is higher than that in 2016. Source of data on industry revenue growth in the first three quarters of 2017: published data source for industry’s first three quarters of 2017 net profit growth data source: published data on data source: published data as of the end of September 2017, a total of 14,200 PPP projects in the database nationwide, with a cumulative investment of 178,000 100 million yuan. Among them, 6,778 projects are in the preparation, procurement, implementation and handover phase (management library projects), with an investment of 10.1 trillion yuan; 2388 projects are in the execution and handover phase (landed projects), with a landing rate of 35.2%, and an investment amount of 4.1 Trillion yuan. From the end of the first quarter of 2016 to the end of September 2017, an average of 847 projects were increased every quarter, with an investment of 1.2 trillion yuan, and the demand for PPP projects continued to increase. Quarterly changes and implementation rates of PPP management database projects Data source: public information compilation PPP management database project investment quarterly changes Data source: public information compilation In July 2017, four ministries including the Ministry of Finance and the Ministry of Environmental Protection jointly issued the 'Regarding Government Participation 'Notice on the Full Implementation of the PPP Model for Sewage and Garbage Treatment ProjectsEnvironmental protection type PPP projects mainly cover sewage treatment, garbage treatment projects, ecological construction and environmental protection projects in municipal engineering. The scale of the project continues to expand, and the implementation rate is relatively high, which has become one of the important driving forces for the rapid growth of the industry's performance. Statistics show that in the industry distribution, the top three projects are municipal engineering, transportation, ecological construction and environmental protection, with 2561, 931 and 481 respectively, accounting for 58.6% of the total number of projects in the management database; The investment amounts were respectively 3198.3 trillion yuan, 3.0306 billion yuan and 589.9 billion yuan, accounting for 67.4% of the total investment. Among them, the number and investment of municipal engineering projects accounted for 37.78% and 31.67%, respectively, and the number and investment of ecological construction and environmental protection projects accounted for 7.1% and 5.84% respectively. The top three in the number of completed projects are municipal engineering, transportation, ecological construction and environmental protection, which together account for 63.5% of the total number of completed projects. Among them, the implementation rate of municipal projects was 39.8%, which was 4.6 percentage points higher than the overall implementation rate; among the secondary industries, the top three projects were sewage treatment, municipal roads and garbage treatment, 243 and 234 respectively. And 88, which together accounted for 55.4% of the total number of municipal engineering projects. The landing rate of ecological construction and environmental protection was 36.8%, 1.6 percentage points higher than the overall landing rate; in the secondary industry, 149 comprehensive treatment projects were landed with an investment of 222.2 billion yuan, accounting for ecological construction and environmental protection landed projects respectively 84.2% and 90% of the total and investment amount. The environmental protection equipment manufacturing industry is an important part of the energy conservation and environmental protection industry, an important technical foundation for environmental protection, and an important guarantee for achieving green development. As the concept of green development takes root in the hearts of the people and the pace of industrial green transformation is further accelerated, a huge market space has been created for the development of the environmental protection equipment manufacturing industry. In 2016, the output value of the environmental protection equipment manufacturing industry was 620 billion yuan, double that of 2011, and the output value is expected to reach 700 billion yuan by the end of 2017. In October 2017, the Ministry of Industry and Information Technology issued the 'Guiding Opinions on Accelerating the Development of the Environmental Protection Equipment Manufacturing Industry' and stated that by 2020, the output value of the environmental protection equipment manufacturing industry will reach 100 billion yuan. In order to achieve the output value target, it means that the output value from 2018 to 2020 will increase by at least 13% annually, which is basically the same as the compound growth rate of 15% in the past five years, and will continue to maintain rapid growth. Data source for the output value planning of the environmental protection equipment manufacturing industry: public data compilation. At present, a total of 28 provinces across the country have carried out pilot projects for the use of emission trading rights, 11 provinces are national pilots, and the rest are voluntary pilots in each province. According to national statistics, as of August 2017, the 11 pilot areas approved by the state had collected 7.3 billion yuan in paid usage fees, and about 360 million yuan had been collected for autonomously developing the pilot areas for paid usage. In terms of emissions trading, the pilot area approved by the state has a transaction volume of about 6.2 billion yuan, and the provinces that carry out their work are 500 million yuan. Pollution rights trading is an important part of the reform of the ecological civilization system. The implementation of a system of paid use and trading of pollution rights can effectively promote pollution reduction. The non-electrical industry market is fragmented, but there is more space. From the perspective of coal consumption in my country, coal accounts for 60% of primary energy consumption, of which about 45% is used in coal-fired power plants, and the rest is used in industrial fields and residential burning. The emissions of sulfur dioxide, nitrogen oxides, and soot from the non-electric industry account for more than three-quarters of the country, and the unit investment in the non-electric industry will be greater than that of the power industry. The non-electric field also includes various industrial process flue gas treatment, which is also an incremental market for future atmospheric treatment. As environmental protection supervision continues to increase, the enthusiasm for transformation in the non-electric field will also increase, which will bring new market opportunities for atmospheric governance companies.
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links