Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
What are the characteristics of different types of xenon lamp aging testers?
There are many brands and types of xenon lamp aging testers. At present, domestic and imported products coexist in the market. According to their heat dissipation methods, there can be different classification standards. It is a question that must be considered. At present, xenon lamp aging testers can be divided into water-cooled, air-cooled and desktop xenon lamp aging testers according to the test standard. The differences between them are explained below. 1. Because the power of the xenon lamp aging tester is quite different from that of the water-cooled xenon lamp, the air-cooled test chamber uses three air-cooled lamps to replace one water-cooled lamp, and the water tower device can be omitted and the equipment structure can be simplified. The three lamps are placed horizontally on the top of the inner tank and irradiated vertically on the sample surface below. There is no special restriction on the state of the sample material. The radiation intensity:≤300W/㎡, relatively suitable for“Indoor products”A variety of material product tests. 2. The xenon lamp aging tester refers to the use of water-cooled xenon lamp tubes as the light source, and the box structure is a standard vertical type. Due to the water cooling cycle of the lamps, a circulating water tower device is installed on the top of the box. A water-cooled lamp tube is placed vertically inside the test box, and the lamp tube is surrounded by clips. The clamp and the bottom turntable are integrated to form a sample rack for the test, and the whole is a cylindrical structure. Before the test, clamp the sample material on the sample holder, and let the light radiated from the lamp irradiate the surface of the sample. At the beginning of the test, the turntable begins to rotate, and the radiation source is aged. Radiation intensity:≤1200W/㎡, relatively suitable for“outdoor products”'s test. 3. The desktop xenon lamp weather resistance test box is also called desktop type, convenient type and simple type. It is a kind of equipment that can be placed on the table for aging test. It can be said to be an air-cooled mini version. The desktop uses an air-cooled lamp tube or a water-cooled lamp tube on the top of the inner liner to irradiate the product and photo-aging. Because of its simple structure and convenient use, it is widely used in many scientific research units and colleges and universities. The air-cooled and water-cooled heat dissipation methods of the xenon lamp aging test machine have their own advantages. The water-cooled type can only be carried out when there is enough water source. Because the machine is not limited by site conditions, the heat dissipation effect is not as obvious as water cooling, but it is convenient; no matter which heat calculation method can be carried out normally, the experiment is feasible.
GESTER International Co.,Limited works very hard to understand your objectives, then create a program that can help you meet them.
GESTER International Co.,Limited trusts our colleagues as valuable members of our textile testing equipment and pledge to treat one another with loyalty, respect and dignity.
It is never too late to have a new mindset and to get things moving in the right direction. Choose GESTER International Co.,Limited to be your quality provider.
1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.
2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.
C
Quick links