Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Analysis of Operation Steps of Digital Fabric Burst Strength Tester
The digital fabric bursting strength tester adopts the method of hydraulic drum explosion (elastic diaphragm method) to measure the expansion of woven, knitted, non-woven, non-woven, paper, board and other materials in warp, weft and all directions at the same time. force and expansion. Applicable standards: ASTMD3786, ERT80-4-20, GB/T7742.1, BSENISO13938-1, BS3424-6-B, ISO3303-B, ISO2758, ISO3303.2, ISO3689, JISL1018L1093, IWSTM170 Main parameters: A. Measuring range: (1% to 100% of full scale) the range can reach 6.000Mpa, the division value is 0.002Mpa; B. Elastic diaphragm size: outer diameterΦ80mm, thickness 0.9±0.1mm; C. Test Cup Kit:Φ112.8mm±0.2mm,Φ79.8±0.2mm,Φ35.7±0.2mm,Φ31.5±0.2mm,Φ30.5±0.2mm,Φ30±0.2mm; D. Burst height: 70±0.02mm; E. Burst time: 99.9±0.1S; F. Hydraulic oil: 85% glycerol, 15% distilled water. Operation steps: 1. Sample selection Randomly select 8 samples with different components and structure, test the bursting strength of each sample 10 times, and analyze and compare the average of their results. 2. Test method Different equipment and different test methods are selected, and the bursting strength results of the samples are also different. GB/T7742.1—The burst time specified in 2005 can be used (20±5) s; the test area is 50cm2, and other test areas such as 100cm2, 10cm2, 7.3cm2 can also be used, and three different test areas are used to test the same sample, and the influence of the test area on the burst performance of the fabric is explored. 3. Test results According to the analysis, in the hydraulic burst test, the test area under the same condition has a great influence on the burst strength value. Generally speaking, the smaller the test area, the greater the bursting strength value. The bursting strength value obtained by using the test area of 7.3cm2 is about 3 times that of the test area of 50cm2. Therefore, the test area should be indicated for the burst test. The digital fabric bursting strength tester adopts the method of hydraulic drum explosion (elastic diaphragm method) to measure the expansion of woven, knitted, non-woven, non-woven, paper, board and other materials in warp, weft and all directions at the same time. force and expansion. Applicable standards: ASTMD3786, ERT80-4-20, GB/T7742.1, BSENISO13938-1, BS3424-6-B, ISO3303-B, ISO2758, ISO3303.2, ISO3689, JISL1018L1093, IWSTM170 Main parameters: A. Measuring range: (1% to 100% of full scale) the range can reach 6.000Mpa, the division value is 0.002Mpa; B. Elastic diaphragm size: outer diameterΦ80mm, thickness 0.9±0.1mm; C. Test Cup Kit:Φ112.8mm±0.2mm,Φ79.8±0.2mm,Φ35.7±0.2mm,Φ31.5±0.2mm,Φ30.5±0.2mm,Φ30±0.2mm; D. Burst height: 70±0.02mm; E. Burst time: 99.9±0.1S; F. Hydraulic oil: 85% glycerol, 15% distilled water. Operation steps: 1. Sample selection Randomly select 8 samples with different components and structure, test the bursting strength of each sample 10 times, and analyze and compare the average of their results. 2. Test method Different equipment and different test methods are selected, and the bursting strength results of the samples are also different. The burst time specified in GB/T7742.1-2005 can be adopted (20±5) s; the test area is 50cm2, and other test areas such as 100cm2, 10cm2, 7.3cm2 can also be used, and three different test areas are used to test the same sample, and the influence of the test area on the burst performance of the fabric is explored. 3. Test results According to the analysis, in the hydraulic burst test, the test area under the same condition has a great influence on the burst strength value. Generally speaking, the smaller the test area, the greater the bursting strength value. The bursting strength value obtained by using the test area of 7.3cm2 is about 3 times that of the test area of 50cm2. Therefore, the test area should be indicated for the burst test.
is emerging as one of the most popular textile testing equipment, moving beyond its tensile tester manufacturers benefits, with conclusive scientific evidence suggesting the positive role play in tensile tester manufacturers.
There is always a question of how to tensile tester manufacturers, but have you ever thought about the price point? Go to GESTER Instruments to get cost effective offer.
An easy and inexpensive textile testing equipment solution can be easily obtained now through purchasing a textile testing equipment tensile tester manufacturers online. Find your solution at GESTER Instruments, your demand will be satified.
This is especially true when GESTER International Co.,Limited have got a global business that's building bridges between manufacturers and customers across the globe.
With this competency, GESTER International Co.,Limited provide high technology and assist customers to create added value and contribute to the development of producing textile testing equipment.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links