loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

Announcement of Bidding for Laboratory Instruments and Equipment of Hunan University of Technology

According to the needs of our school, and with the approval of the school’s equipment bidding leading group, it is decided to purchase the following products from a single source (or obtain them from a specific supplier). 1. The content, quantity and brief technical requirements of the project 1) The content and quantity of the project:  Erya General Course 2) Please refer to the bidding documents for brief technical requirements. 2. Requirements for bidder qualifications, credit standing, etc. 1) Bidders must meet the requirements of Article 22 of the Government Procurement Law of the People’s Republic of China (with the ability to independently bear civil liability; have a good business reputation; have been in business activities for the past 3 years No record of major violations of law) and provide copies of relevant qualifications and credit certificates (original documents for reference). 2) Other requirements: There is no advance payment and progress payment for this project, and the bid inviting party will settle the settlement after acceptance. The qualifications, credit and other requirements of the above-mentioned bidders require bidders to provide copies of relevant certification materials item by item in written form (original documents for reference) when submitting bid documents. The tenderer will use its certification materials to determine whether the bidder has the bidding documents The qualifications of the project. 3. The start time of the issuance of the bidding documents and the registration for the bidding: October 11, 2014 (9:00-11:00 am 3:00-5:00 pm) End time: October 21, 2014 9:00 am End location: Laboratory Construction and Equipment Management Office of Hunan University of Technology (Room 405, Science and Technology Building, Hexi New Campus) Contact: Teacher Huang, Teacher Ding Tel: 0731-21834174. Opening time: October 21, 2014 at 9:30 am : Conference Room 405, Science and Technology Building, Hunan University of Technology 5. Contact information for this bidding Contact address: Laboratory Construction and Equipment Management Office of Hunan University of Technology (Room 405, Science and Technology Building), Taishan West Road, Tianyuan District, Zhuzhou City Contact: Mr. Huang Contact Mr. Ding Tel: 0731-2183417 Laboratory Construction and Equipment Management Office October 11, 2014

GET IN TOUCH WITH Us
recommended articles
According to ASTM D642 Standard: Detailed Box Compression Strength Tester GT-N02A
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
How to Choose Light Fastness Tester: Water-Cooled and Air-Cooled
Choosing between water-cooled and air-cooled light fastness testers depends on precision needs, budget, and application. Water-cooled testers (like GESTER GT-3000) offer superior spectral accuracy and stability for rigorous standards (e.g., automotive, coatings). Air-cooled models (like GESTER GT-D02A-1) provide energy efficiency and easier installation for routine QC. This guide compares cooling methods, features, and applications to help you select the optimal tester.
What is a Light Fastness Tester?
A Light Fastness Tester accelerates material aging by simulating sunlight (xenon lamps) and moisture to predict long-term durability. Used in textiles, automotive, plastics, and more, it follows AATCC TM 16, ISO 105-B02, and ASTM standards. Features include real-time light control, temperature/humidity regulation, and energy-efficient testing.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
Why is TPP Testing Important for Firefighter Protective Clothing
TPP testing objectively evaluates the thermal protective performance of firefighter protective clothing under extreme radiant and convective heat. This article explains TPP testing principles, its role in meeting NFPA/ISO standards, and how advanced equipment like the GT-RC02 TPP tester helps ensure clothing reliability and firefighter safety.
Understanding Universal Tensile Testing machine: Feature, Operation
Discover how universal testing machines perform tensile, compression, bending, and peel tests on metals, plastics, rubber, and composites. Features include servo motors, 0.001mm resolution, RS232 data, and safety systems. Step-by-step operation guide included.
Water Resistance Testing Standards and Methods
Textile water resistance testing evaluates fabrics through three primary methods: hydrostatic pressure (measuring water penetration resistance), spray rating (assessing surface water repellency), and water repellency tests (quantifying water absorption). Hydrostatic pressure testing is critical for high-performance applications like outdoor apparel and diving gear, while spray rating evaluates surface staining for rainwear. Water repellency tests, such as the Bundesmann method, determine overall
Four Color Fastness Test Method for Laboratory Drying Oven
GESTER’s laboratory drying oven is designed for textile color fastness testing, including perspiration, seawater, water, and saliva resistance. Compliant with ISO, AATCC, GB, and JIS standards, it ensures precise heating and drying for accurate test results. Learn the step-by-step four color fastness test method and its applications.
Analysis of Pilling Influencing Factors and Testing Methods
Pilling testing plays a vital role in textile quality control, helping manufacturers evaluate and improve the wear performance of fabrics. Through the use of advanced instruments like ICI Pilling Box Test Method (GT-C18) , Martindale Abrasion Test Method (GT-C13B) , and Random Tumble Pilling Test Method (GT-C19A) , laboratories can conduct precise and standardized assessments, ensuring that final textile products deliver superior appearance, comfort, and longevity.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect