Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Announcement of Tender for Scanning Electron Microscope of Beijing Institute of Machinery Industry Automation
Reprinted in the information of China International Bidding Network! Announcement of bidding for scanning electron microscope of Beijing Institute of Machinery Industry Automation Zhongkexin Engineering Consulting (Beijing) Co., Ltd. (tendering agency) was entrusted by Beijing Institute of Machinery Industry Automation (tenderee) to conduct international public bidding and procurement of the project. The SEM project has the bidding conditions: Scope of bidding Goods name: SEM bidding number: 0779-14401011A01-1 Main technical parameters: ★High vacuum resolution is better than 1.2nm at 30 kV (SE); better than 2.5nm at 3 kV (SE); better than 2.5nm at 30 kV (BSE) ★low vacuum resolution better than 1.5nm at 30 kV (SE); better than 3.0nm at 3 kV (SE) ★probe current 2pA～200nA continuously adjustable , Measurable, displayable magnification range: 6X~1000,000X magnification should adopt coarse and fine adjustment mode, continuous adjustable mode, and select the setting value from the user menu; work can be adjusted with the working distance or acceleration The voltage change can automatically and accurately correct the magnification, and according to the change of the image output device, the magnification can be automatically and accurately corrected. Accelerating voltage 0.3kV~30kV The voltage is required to be continuously adjustable. ★Equipped with electron beam deceleration mode. ★Equipped with a set of active electromagnetic shock absorbers. Purchase quantity: 1 set 2. Qualification requirements for bidders 2.1 The bidder must be a supplier who is legally and financially independent, legally operating and independent of the tenderer and the tendering agency, and must provide valid business registration and other permits Proof of business. 2.2 The bidder must obtain the legal authorization of the manufacturer and provide documents proving that it is qualified to participate in the bidding and is able to perform the contract after winning the bid. 2.3 The bidder shall provide the performance of supplying more than 20 units of similar products in Mainland China from 2011 to now, and provide supporting materials (such as contracts, acceptance documents, customer certification, etc.). 2.4 This project does not accept consortium bidding. 2.5 Bidders must purchase and register the bidding documents from the bidding agency to be eligible for bidding. 2.6 Legal persons or other organizations entrusted to participate in the preliminary consultation of the project and the preparation of bidding documents shall not participate in the bidding. 3. Obtaining Bidding Documents 3.1 Anyone who is interested in participating in bidding, please start from October 17, 2014 to November 17, 2014 (except statutory holidays and statutory holidays), 9 am to 11 am, and 14 pm to 16:00 (Beijing time, the same below) to purchase the bidding documents. Please read the following precautions in detail before purchasing the bidding documents. 3.2 Before purchasing the bidding documents, please fill in each item in the bidding document purchase record form in detail, and fax the completed bidding document purchase record form to 010-88529153, and at the same time send the purchase record form electronically to zhongkexin@vip.126.com Version. Note: The mailbox for sending the purchase information must be the same as the mailbox for receiving the bidding documents. We will directly send back the bidding documents. If the mailbox is inconsistent, the bidder will be responsible for the delay in sending the bidding documents. 3.3 The price of each set of bidding documents is 800 yuan (electronic version). If the paper version of the bidding documents needs to be mailed, an additional mailing fee of 100 yuan will be required. The bidding documents are not refundable after sale. Those interested in participating in the bidding shall purchase the bids by wire transfer to the bidding agency through the unit account (individual remittances are not accepted). Tender invoices are issued strictly according to the name of the remittance account. Please fill in the bidding number of the tender for the remittance remarks. 3.4 Our company will send the electronic version of the bidding documents as soon as the bidding payment is received and the purchase record form of the bidding documents is received. Due to the delay in the payment arrival time, please wait patiently. For questions and answers regarding the content of the bidding documents, please consult the contact person of the bidding agency. 4. Submission of bid documents 4.1 The deadline for submission of bid documents (the deadline for bidding, the same below) is at 9:30 on November 18, 2014, at the intersection of Jingouhe Road and Caishi North Road, Haidian District, Beijing Meeting room on the third floor of Building 88 in the southeast corner. 4.2 Tenderees will not accept bid documents that are delivered overdue or not delivered to the designated place. 5. Bid Opening 5.1 The bid opening time is at 9:30 on November 18, 2014, at the meeting room on the third floor of Building 88, at the southeast corner of the intersection of Jingouhe Road and Caishi North Road, Haidian District, Beijing. 6. Contact information Name of bidder: Beijing Institute of Mechanical Industry Automation Address: No. 1 Jiaochangkou, Deshengmenwai, Xicheng District, Beijing Postcode: 100120 Contact Person: Wang Yue Telephone: 010-82285251 Fax: 010-62051242 Name of Tendering Agency : Zhongkexin Engineering Consulting (Beijing) Co., Ltd. Address: Building 88, Southeast corner of the intersection of Jingouhe Road and Caishi North Road, Haidian District, Beijing, China Post Code: 100039 Contact Person: Zhang Fangfang Telephone: (010) 88529213 Fax: (010)88529153 E-mail: zhongkexin2011@126.com Account Bank: Hua Xia Bank Beijing Branch Business Department Account Number: 10250000000968510
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links