loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

Anti-smog screens, black technology to filter PM2.6

There is a saying that goes like this: There is no lack of beauty in this world, but the eyes that discover beauty are lacking. But now, this sentence has been ridiculed as 'I had a pair of eyes that found beauty, but I lost it to the smog.' Junada Technology is a foreign member of the Royal Academy of Engineering, a member of the Singapore Academy of Engineering, a member of the Indian National Academy of Engineering, and a member of the ASEAN Academy of Engineering and Technology. It is understood that Academician Syram has long been engaged in research on the processing and surface functionalization of polymer composites, biocomposites, and electrospinning nanofibers, mainly to provide technical support for the research and development and industrialization of the project, and to solve technical difficulties. Breathable and impermeable, energy saving by one third: In the exhibition hall of Junada Technology, an anti-smog screen window has successfully attracted the attention of visitors. The reporter saw that this anti-smog screen is not much different from ordinary screens in terms of appearance; in terms of color, the appearance of the anti-smog screens is light gray, slightly brighter and whitish; With a touch of the hand, it is obvious that the anti-smog screens are stronger and smoother, and the 'eyes' are small. The staff performed a performance demonstration on the spot, and poured a bottle of water on the screen window. After a few minutes, no drop of water penetrated the screen. 'The electrospinning nanofiber material is a fiber material with a diameter in the range of tens to hundreds of nanometers. This screen window is covered with a layer of porosity of 80% on the surface of ordinary screen window, and millions of micropores are densely packed per square centimeter. The nanofiber membrane has a pore size distribution between 100 nanometers and 300 nanometers. Taking into account the production cost and actual use effect, the filtration efficiency of PM2.5 (particulates with a diameter of 2.5 microns or less) is controlled at about 95%, which can effectively block fog Haze and dust enter the room without affecting the normal circulation of air, and have auxiliary functions such as sterilization, disinfection and radiation protection.' said Dr. Yu Miao, chairman of Junada Technology. According to reports, electrospinning nanofiber materials is the use of electrospinning technology to nanofiber fibers, which are currently used in screens, masks and filter cartridges. Yu Miao introduced that from the perspective of filtering dust, electrospun nanofiber materials can achieve a filtering effect of more than 99% for PM0.3 (solid particles or droplets with a diameter less than or equal to 0.3 microns), and achieve traditional filtering. Pressure drop below half. In the case of masks, when the pressure drop is reduced, the resistance will be reduced, and the ventilation effect will be good, and the smoothness of human breathing will be improved. Take the filter cartridge in the industrial field, the greater the resistance, the more powerful the fan must be drawn. The more energy is consumed, and the pressure drop and resistance come down, the energy is saved. The use of nanofiber materials can save one-third of the energy. From the laboratory to the industrialization: Internationally, professional electrospinning nanofiber production equipment and solution suppliers have appeared around 2010. For China, low output and poor quality controllability have always been the primary problems for nanofibers to move from the laboratory to the industrialization. 'We plan to start with the production of electrospinning nanofiber equipment, and then produce nanofiber products, along with China's'One Belt One Road' initiative, and expand the international market.' Academician Syram introduced that the project is positioned as the number one electrospinning in China A supplier of overall industrial solutions for new nanofiber materials, as well as the industrial development of new nanofiber materials in the fields of energy, electronics, biomedicine, chemicals and the environment, and functional textiles. To this end, on the basis of research results related to nanofibers at home and abroad, Gonada Technology starts with the most critical functional indicators such as the strength of nanofibers to bring the technology to the market. It is worth mentioning that Junada Technology also has the only domestic electrospinning nanofiber mass production line for mass production of nanofiber films in factories and workshops. 'The company itself is positioned as a technology exporter, and the output is equipment, raw materials and production technology.' Yu Miao introduced that the first step of the project is mainly for the development of screens, masks and other civilian products; the second step is for industrial water filtration and seawater. The development of desalination and air filtration filters, filter elements, and filter cartridges, the third step is the research and development of medical equipment. Electrospinning nanofiber technology can also help upgrade backward production capacity. 'As far as ordinary gauze is concerned, the price of a square meter is only a few yuan, the profit is very low, and it consumes a lot of labor and energy. Our medical anti-haze gauze is generally sold at 200 yuan to 400 yuan in the market. Yuan per square meter, the highest sold for 800 yuan to 1,000 yuan, which gives new vitality to the traditional industry.' Zhu Qinwen, deputy general manager of the company introduced. At present, the company's first-phase product anti-smog screens have been promoted in cooperation with larger screen manufacturers in China. The initial plan is to promote this technology in Hebei. The product has been mass-produced in November this year, and the order exceeds 20,000 square meters. . In addition, with the addition of anti-smog masks and electrospinning nanofiber products such as electrospinning guns, the sales revenue of this project will exceed 5 million yuan this year, and it is expected that the cumulative sales in the next three years will exceed 100 million yuan.

GET IN TOUCH WITH Us
recommended articles
What Are the Test Methods for Fabric Bursting Strength?
Fabric bursting strength measures resistance to rupture under concentrated load. Three primary test methods are used:

Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.

Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.

Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
According to ASTM D642 Standard: Detailed Box Compression Strength Tester GT-N02A
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
How to Improve the Accuracy of a Martindale Tester
Ensuring the accuracy of your Martindale abrasion and pilling tester is critical for reliable textile quality control. This guide details essential steps, from precise sample preparation and correct machine operation to routine maintenance. We also explore how advanced testers, like the GESTER model with its dual-servo drive and tool-free operation, are engineered to eliminate common sources of error and enhance testing precision for superior results.
What are The Flame Retardant Test Methods ?
Flame retardant testing evaluates materials' ability to resist ignition and slow fire spread. This guide covers key textile test methods (45°, horizontal, vertical), standards (ASTM, ISO, BS), and equipment like flammability testers for upholstery, carpets, and fabrics.
Installation Training for the Incline Impact Tester GT-N49
Our expert team provides comprehensive on-site installation and training for the Incline Impact Tester GT-N49. This critical packaging testing equipment simulates real-world impacts during handling, transport, and stacking to evaluate product damage resistance. Learn about its key features like flexible moving plates, height adjustment, pneumatic angle control, and remote operation safety. Our service ensures proper setup, operational mastery, maintenance guidance, and troubleshooting support fo
Four Color Fastness Test Method for Laboratory Drying Oven
GESTER’s laboratory drying oven is designed for textile color fastness testing, including perspiration, seawater, water, and saliva resistance. Compliant with ISO, AATCC, GB, and JIS standards, it ensures precise heating and drying for accurate test results. Learn the step-by-step four color fastness test method and its applications.
How to Know the Fabric Shrinkage Test for Your Projects
Master fabric shrinkage testing with this definitive guide. Understand causes of shrinkage, industry standards (ISO, GB, AATCC), step-by-step testing methods using Wascator equipment, and strategies to minimize shrinkage for superior garment quality and customer satisfaction.
GESTER: China Top PPE Testing Equipment Company Leading Global Safety Standards
Since 1997, GESTER International Co., Ltd has emerged as China’s top PPE testing equipment company, with 25+ years of R&D experience in high-precision testing instruments. Serving clients in over 160 countries and partnering with global leaders like SGS, Intertek, and TUV, GESTER aligns its products with international standards (ISO, ASTM, EN, GB) to ensure reliable PPE performance. Highlighted by the GT-RC02B TPP Thermal Protection Tester—capable of simulating extreme thermal environments and calculating critical safety metrics like TPP values and escape time—and the GT-KC28 TDM Cut Test Machine, GESTER’s portfolio covers thermal protection, cut resistance, footwear testing, and more. The company offers comprehensive support, including ISO 17025/NFPA-aligned calibration, on-site installation, and staff training, empowering PPE manufacturers and testing laboratories to meet stringent global regulations, prevent workplace injuries, and accelerate market access. As a leader in global safety standards, GESTER combines technical precision, user-centric design, and lifecycle service to deliver tailored solutions for high-risk industries worldwide. Visit https://www.gesterinstruments.com/ for full product details.
How to Choose the Right Safety Shoes Testing Equipment Supplier?
Safety shoes are essential personal protective equipment (PPE) in high-risk industries. To ensure compliance with international standards such as EN ISO 20345 and ASTM F2413, professional testing equipment is required. This article explains common safety shoes test items, corresponding testing machines, and how to choose a reliable safety shoes testing machine supplier. It also analyzes key factors such as technical capability, standard compliance, equipment stability, and cost performance to help enterprises build a strong quality control system and enhance global competitiveness.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect