Gester Instruments | Professional Textile Testing Equipment Manufacturers Since 1997
Battery weight impact testing machine operating specifications
First to introduce the battery weight impact testing machine test purpose: weight tester is suitable for the battery, Or battery pack) Under different quality of heavy objects from different heights through free-fall impact on batteries, lead to destructive test of battery internal short circuit, through the observation period is used to assess the safety of the battery performance test results. Battery should be qualified for no fire, no explosion. Battery weight impact testing machine installation requirements: (1) operating environment requirements: room temperature 10 ℃ - 40 ℃ range; Environmental humidity in 30% 80% less than other: the machine should be placed on a level and a land of a certain intensity on the installation location. Battery weight impact testing machine operation steps: 1, the first confirmed using the power supply voltage is 220 v, connect the power supply, open the power switch, the fan start randomly; 2, the door is opened again, choose the required impact height, and then shut the door, press & other; Rose & throughout; Key, falling ball weight automatically rise to the required height limit ( Height limit is 610 mm or 1000 mm) After automatic stop rising. 3, the door is opened, the safety pin plug ( Please strictly in accordance with the steps to security to protect role) , the sample will be tested in the pressure plate around the center position, again puts rail sample center location clamping batteries, allocate safety latch, the door is closed. 4, press & other; Impact & throughout; Key, falling ball weight free fall, complete a test. Operation note: 1, the test specimen shall be the deformation or shell packing sound samples, lest affect test results. 2, each operation placed before the sample, please be sure to put good, according to the bolt is strictly prohibited in the case of without a safety pin, lest produce unnecessary accidents. 3, change the test height is 1000 mm, 610 mm only the limit switch screws loosen, and remove this limit. Tags: & nbsp battery weight impact tester & NBSP weight impact testing machine supplier & NBSP battery weight impact testing machine operation specification
are an important part of the society and they come in handy in any place where there are tensile tester manufacturers in need of tensile tester manufacturers.
As manufacturers we are determined to be the very best in textile testing equipment, regardless of the size, pedigree or inclinations of our competitors.
To have a that needs much precaution in handling, it is best to rely only on reliable providers. GESTER International Co.,Limited can provide quality tensile tester manufacturers textile testing equipment that meet all your requirements for a while meet your individual needs.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links