loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

China National Textile and Apparel Council Standardization Technical Committee was established today, Sun Ruizhe put forward 4 requirements

On April 13, the inaugural meeting of the Standardization Technical Committee of the China National Textile and Apparel Council was held in Beijing. Sun Ruizhe, Chairman of the China National Textile and Apparel Council, Wang Li, Deputy Director of the Second Industrial Standards Department of the National Standardization Administration, Cao Xuejun, Deputy Director of the Consumer Goods Industry Department of the Ministry of Industry and Information Technology, Li Lingshen, Vice President of the China Textile Federation, and Sun Xiaoyin, Director of the Human Resources Department , Peng Yanli, Deputy Secretary-General of China Textile Federation and Director of Science and Technology Development Department, Zhang Junsheng, Deputy Director of China Textile Federation Industry Department, Zhang Huiqin, Deputy Director of China Textile Federation Science and Technology Department and Director of Textile Industry Science and Technology Development Center, Director of Standards Division of Science and Technology Department of Ministry of Industry and Information Technology Leaders such as Sheng Xijun and Yu Kun, Director of the Comprehensive Division of the Consumer Goods Industry Department of the Ministry of Industry and Information Technology attended the meeting.   The first session of the China Textile Federation Standardization Technical Committee members and consulting group members represented more than 200 people to participate in the meeting.   The meeting announced that the China Textile Federation Standardization Technical Committee was formally established, and Li Lingshen was appointed as the director of the China Textile Federation Standardization Technical Committee, Peng Yanli, Fu Guangwei, and Zhang Junsheng were the deputy directors, Sun Ximin was the secretary-general, and Wang Yuqi and Wang Guojian were the deputy secretary-generals. The meeting was chaired by Sun Ximin, deputy director of the Science and Technology Development Department of China Textile Federation and Secretary-General of the Standardization Technical Committee.   China Textile Federation President Sun Ruizhe pointed out in his speech that the development environment and situation of my country's textile industry is at a new starting point in the critical strategic period of changes in growth rate, adjustment of industrial structure, and transformation of development power. In the new era, new normal and new actions, China's textile industry should develop in an all-round way in terms of morality, intelligence, physicality and beauty. 'Germany' represents a green industry oriented by achievement responsibility, 'wisdom' is embodied in the creation of an innovation-driven technology industry, 'body' means shaping a technology-intensive manufacturing industry, and 'beauty' is embodied in the establishment of a culturally ^ fashion industry. In the course of the industry's future transformation and reform, in the construction of a textile power, the comprehensive development of morality, intelligence, physical and beauty cannot be separated from the strong support of standard work. Regarding the group standardization work carried out by the China Textile Federation Standardization Technical Committee, Sun Ruizhe put forward four requirements: First, it is necessary to focus on the task of building a strong textile country, promote textile technology, brand, sustainable development and the strategy of strengthening the country by talents, in order to accelerate the structural reform of the textile supply side. , The implementation of the 'three products' strategy provides standard support; the second is to seize the major opportunities of the country to deepen the reform of standardization work, change concepts, reform and innovate, and accelerate the construction of a new textile standard system with coordinated development and coordination of government standards and market standards; third, We must make good use of the platform of the Technical Committee, strengthen cooperation with relevant institutions at home and abroad, gather intelligence and strength, promote group standards to better meet the needs of industry development, and better serve the construction of market systems; fourth, we must strengthen technology Committee management, reasonable planning of technical committee organizational structure, establishment of long-term working mechanism, and efforts to create a well-known brand of China Textile Federation group standards.  Wang Li, deputy director of the Second Industrial Standards Department of the National Standards Committee, interpreted the situation and related policies of the deepening reform of national standardization, emphasized the importance of carrying out group standardization work, and provided important guidance for China Textile Federation to carry out group standardization work. Cao Xuejun, deputy director of the Consumer Goods Industry Department of the Ministry of Industry and Information Technology, reported on the development situation of the consumer goods industry, analyzed the new requirements for standardization work put forward by the transformation and development of the industry, expounded the key directions of standardization work in the field of industry and information technology, and proposed the standardization work of the China Textile Federation. hope.   Sun Xiaoyin, director of the Human Resources Department of China Textile Federation, announced the 'Notice on the Establishment of the Standardization Technical Committee of China Textile Industry Federation' and the 'Notice on the Appointment of Comrade Li Lingshen and Comrade Li Lingshen' by the Party Committee of China Textile Industry Federation.   Peng Yanli, Deputy Secretary-General of the China Textile Federation, Director of the Science and Technology Development Department, and Deputy Director of the Standardization Technical Committee, delivered a report on the preparation of the first China Textile Federation Technical Committee.   Zhang Junsheng, deputy director of the China Textile Federation Industry Department and deputy director of the Standardization Technical Committee, read out the 'Decision on Establishing the Consultation Group of the China Textile Federation Standardization Technical Committee.' Li Lingshen, vice chairman of the China Textile Federation and director of the first China Textile Standardization Committee, pointed out in his speech that the establishment of the China Textile Standardization Committee marks a new stage of marketization and exploration for the construction of the textile standard system. The three endeavours of the Textile Federation’s group standardization work: based on the construction of a new standard system, do a good job in linking up with government standards; undertake the transfer of government standardization functions to ensure a smooth transition in the market; focus on the needs of the industry and enterprises to stimulate the China Textile Federation The endogenous motivation for the development of group standards. 

There is a strong need for more research on , in order to be able to provide strong and conclusive evidence of their tensile tester manufacturers effects. However, recent studies have provided valuable insights into how the intake of may result in improved tensile tester manufacturers.

As President of GESTER International Co.,Limited, I am committed to the enduring values of integrity, accountability, innovation and flexibility, value creation and social responsibility.

If you are looking for best product, then here are some product like textile testing equipment, tensile tester manufacturers and tensile tester manufacturers in various styles which will surely meet your demand. Visit GESTER Instruments to know more!

Do you want to find a provider to get your textile testing equipment problem settled? If so, we suggest that you give a shot to GESTER International Co.,Limited. Visit GESTER Instruments to learn more and contact us.

GET IN TOUCH WITH Us
recommended articles
Cobb Test Paper Absorption Tester GT-N07 - A Comprehensive Guide
The Cobb Test Paper Absorption Tester GT-N07 is an essential instrument for evaluating the water absorption properties of paper and paperboard materials. This test, commonly known as the Cobb method, helps determine how much water paper can absorb over a specified time under controlled conditions—crucial for assessing its suitability in printing, packaging, and coating applications.
How to Choose Light Fastness Tester: Water-Cooled and Air-Cooled
Choosing between water-cooled and air-cooled light fastness testers depends on precision needs, budget, and application. Water-cooled testers (like GESTER GT-3000) offer superior spectral accuracy and stability for rigorous standards (e.g., automotive, coatings). Air-cooled models (like GESTER GT-D02A-1) provide energy efficiency and easier installation for routine QC. This guide compares cooling methods, features, and applications to help you select the optimal tester.
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
What Are the Test Methods for Fabric Bursting Strength?
Fabric bursting strength measures resistance to rupture under concentrated load. Three primary test methods are used:

Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.

Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.

Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Analysis of Pilling Influencing Factors and Testing Methods
Pilling testing plays a vital role in textile quality control, helping manufacturers evaluate and improve the wear performance of fabrics. Through the use of advanced instruments like ICI Pilling Box Test Method (GT-C18) , Martindale Abrasion Test Method (GT-C13B) , and Random Tumble Pilling Test Method (GT-C19A) , laboratories can conduct precise and standardized assessments, ensuring that final textile products deliver superior appearance, comfort, and longevity.
Four Color Fastness Test Method for Laboratory Drying Oven
GESTER’s laboratory drying oven is designed for textile color fastness testing, including perspiration, seawater, water, and saliva resistance. Compliant with ISO, AATCC, GB, and JIS standards, it ensures precise heating and drying for accurate test results. Learn the step-by-step four color fastness test method and its applications.
How to Test Firefighter Turnout Gear Thermal Protection?
Firefighter turnout gear plays a critical role in protecting firefighters operating in extreme environments involving high temperatures, flames, radiant heat, and convective heat. Its thermal protective performance directly affects firefighter safety and survival during fireground operations. This article explains how to test firefighter turnout gear thermal protection through Thermal Protective Performance (TPP) testing. It introduces the scientific principle based on the Stoll curve, outlines key influencing factors such as heat flux intensity and exposure time, and reviews internationally recognized standards including NFPA 1971 and ISO 17492. The article also highlights the testing advantages of the GT-RC02 TPP Thermal Protection Tester, which provides accurate, stable, and standards-compliant evaluation of flame-retardant protective clothing materials under combined radiant and convective heat exposure.
According to ASTM D642 Standard: Detailed Box Compression Strength Tester GT-N02A
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
Strengthening Safety Standards: The Role of a PPE Testing Equipment Supplier at A+A
The A+A Trade Fair in Düsseldorf (2026) highlights tightening global PPE safety regulations, shifting the industry from basic compliance to comprehensive performance verification. As international standards (ISO, EN, ASTM) become more granular, professional PPE testing equipment suppliers like GESTER play a pivotal role in bridging theoretical standards and practical implementation. GESTER’s high-precision, multi-standard testing tools (covering cut resistance, thermal protection, liquid penetration, etc.), backed by ISO 9001 certification and partnerships with SGS/TUV, ensure data traceability, reliability, and compliance. With 20+ years of expertise, modular innovation, and holistic service (calibration, training), the supplier supports manufacturers and laboratories in meeting stringent safety benchmarks, enabling global market entry and safeguarding worker lives. Strategic procurement of such future-ready equipment is key to long-term occupational safety success.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect