Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Products
PPE Testing Equipment
TPP Thermal Protection Tester
Heat Radiation Tester
Heat Contact Machine
Heat Transmission Resistance Tester
Against Molten Metal
Electrostatic Charge Attenuation Tester
Dry State Lint Tester
Blood Penetration Resistance Tester
Sweating Guarded Hot Plate
Impact Penetration Tester
Dry Microbial Penetration Resistance Tester
Wet-resistant Bacterial Penetration Tester
Static Decay Tester
Fabric Friction Electronic Charge Density
Universal Test Machine
Tensile Test Machine
Martindale Tester
Humidity Test Chamber
Common problems and solutions of American standard washing machines1
2022-10-03
Gester Instruments
300
Common Problems Possible Cause Solutions If the sample is too tight, there will be a lot of noise during the dehydration process, but it is normal for the load sensing system to start and the load sensing system will work for a few minutes before the washing starts. Whether the washing machine can't work or can't fill the water supply check whether the water valve connection is normal, cold, and the hot water interface should be connected to the power supply, the ground wire, and the extension cord. Please do not add other samples after the start of the washing process to avoid the unbalanced operation of the inner tank and the dehydration failure. The dehydration rate should be properly increased. Appropriately reduce the amount of detergent and remove excess foam Article Source: (Hong Kong) Co., Ltd.
GET IN TOUCH WITH Us
recommended articles
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
Discover actionable strategies to enhance the drop dart impact strength of plastic films for packaging, agriculture, and construction. Learn how material selection, additives, processing, and rigorous ASTM/ISO drop dart impact testing ensure product durability and prevent failure.
A Light Fastness Tester accelerates material aging by simulating sunlight (xenon lamps) and moisture to predict long-term durability. Used in textiles, automotive, plastics, and more, it follows AATCC TM 16, ISO 105-B02, and ASTM standards. Features include real-time light control, temperature/humidity regulation, and energy-efficient testing.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
GESTER’s laboratory drying oven is designed for textile color fastness testing, including perspiration, seawater, water, and saliva resistance. Compliant with ISO, AATCC, GB, and JIS standards, it ensures precise heating and drying for accurate test results. Learn the step-by-step four color fastness test method and its applications.
A Programmable Temperature Humidity Chamber simulates environmental conditions to test product durability, stability (like shelf life & ageing), and performance across materials, electronics, automotive parts, food, and pharmaceuticals. This guide explains its five core systems (Control, Refrigeration, Heating, Humidity, Air Circulation) and their functions for precise testing.
TPP testing objectively evaluates the thermal protective performance of firefighter protective clothing under extreme radiant and convective heat. This article explains TPP testing principles, its role in meeting NFPA/ISO standards, and how advanced equipment like the GT-RC02 TPP tester helps ensure clothing reliability and firefighter safety.
The A+A Trade Fair in Düsseldorf (2026) highlights tightening global PPE safety regulations, shifting the industry from basic compliance to comprehensive performance verification. As international standards (ISO, EN, ASTM) become more granular, professional PPE testing equipment suppliers like GESTER play a pivotal role in bridging theoretical standards and practical implementation. GESTER’s high-precision, multi-standard testing tools (covering cut resistance, thermal protection, liquid penetration, etc.), backed by ISO 9001 certification and partnerships with SGS/TUV, ensure data traceability, reliability, and compliance. With 20+ years of expertise, modular innovation, and holistic service (calibration, training), the supplier supports manufacturers and laboratories in meeting stringent safety benchmarks, enabling global market entry and safeguarding worker lives. Strategic procurement of such future-ready equipment is key to long-term occupational safety success.
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Quick links
Contact us
Mobile/Whatapp/ Wechat:
+ 86 018059983973
Address: Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and Technological development zone quanzhou of fujian.China.
Friendly Links: Physial Testing Instruments And Equipments
Contact us
Leave your inquiry, we will provide you with quality products and services!
Customer service