Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Europe and the United States, the furniture of technical standards
1) International furniture standards: the current iso/tc136 international furniture standards committee has established 29 furniture standard, mainly including store content ark, desk, chair, stool, bed, kitchen equipment and children's furniture furniture such as product standards and furniture surface properties, such as performance, flame retardant performance standards and furniture castor fittings such as standard. iso16000 - 1,iso16000 - 2、iso16000- 3,iso16000 - 4 and iso16000 - 6, a total of five standard of indoor air and the organic matter content of furniture release. 2) European furniture standards: din is the standardization of the competent authority in Germany, there are about 6000 industrial companies and organizations for its members. Established 138 furniture din standards, including drafting 47 standard, USES the standard en 68, adopt iso standard 4, adopting three vde standard. Afnor is short for French standardization association, was founded in 1926, is a funded by the state, the public service and recognition from the government of civil society. Afnor existing more than 1300 technical committee, has nearly 35000 experts to participate in the formulation of the standards. Afnor standard established 40 furniture. Bsi is short for British standards institution. Bsi, founded in 1901, is the world's first international organization for standardization, is the British government to admit and support non-profit civil society. Bsi standards established 153 furniture, including the drafting of 52 standard, USES the standard en 87, the iso standard 4. The FSC certification are widely acknowledged in the international forest certification system. The so-called green label, is to obtain international recognition of FSC forest certification logo. Forest certification is to meet the environmental standards of wood labeled 'tag', to ensure the sustainable development of forest. FSC forest certification can be divided into two types, namely forest management certification ( 融合) And the chain of custody certification ( coc) 。 FMC is authentication on forestry enterprise's performance, the coc is for wood processing enterprises of each link, that is, from log transportation, processing, circulation and eventually the entire product line for certification of consumers. 3) American furniture standards (epa The United States environmental protection agency) Responsible for project set up the national standards for the environment, and monitoring the implementation of mandatory standards and conform to the situation. The United States to furniture products have strict safety and environmental protection technical regulations, requires that all the requirements of the relevant import furniture must conform to the epa. Epa requirements are put forward for wooden furniture manufacturing, especially in paints, adhesives, furniture such as wax release of harmful substances in the production of necessities for the strict rules, such as the paint of the release quantity of formaldehyde in shall not exceed the international standard, namely every 100 grams shall not exceed 10 mg etc. Epa classification of wooden furniture is quite detailed, such as a cane to make furniture, solid wood furniture, man-made board, furniture, etc. , for different products for different environmental requirements. ANSI American national standards institute, has formulated the 47 standard at present, the referenced astm standard 18, 10 bifma standard, reference 4 ul standard. ANSI furniture is focused on the furniture of the flame retardant performance, including 17 furniture flame retardant performance standards, including decoration, furniture, decoration, furniture parts, accessories, upholstered furniture, mattresses and bedding, folding chairs of the flame retardant performance testing, and including the wooden ladder, folding chairs, kitchen cabinet hardware, stadium bleachers, cabinets, furniture to homes and businesses, full-size crib, foldable, and can be pulled out of seats and the grandstand, furniture, car cushion, mattress and similar purposes with soft foam material and other furniture products and furniture material standards. bifma5. 1 tests on the office chair: the chair strength test, strength test with five claws, sandbags free fall impact fatigue test tilting mechanism, rotation test, seat fatigue impact test, stability test, strength test, fatigue test, the back of the chair armrest castor, fatigue test with five claws, chair leg strength test, pedal fatigue test, and the harsh is far higher than other similar criteria. 37 furniture were formulated standards, mainly including: Ø furniture product standards: including schools with furniture, Library science test bench and stool, with tables and chairs, cooking, sewing table with chairs and tables, the craft is the artroom with tables and chairs, multi-purpose table, platform, technology with tables and benches, domestic use tables and benches, storage furniture, shoe rack, umbrella stand, children, students with garment cap ark, cleaning tank, etc. ) , home furniture, Study table, chair, bed, baby bed, double bed, etc. ) , office furniture, Desk, chair, table, storage tank, steel shelves, etc. ) And steel storage tank, etc. ; Test standard Ø furniture: furniture surface resistance to cold fluid, the general principles of the performance test method, furniture furniture overturned vibration and seismic test method, strength and durability test, test standard; Furniture electrical safety requirements.
GESTER International Co.,Limited also discusses implications for both research and the practice of operations in building systems to help people succeed in both the short and long run.
GESTER International Co.,Limited are a market-focused, process-centered organization that develops and delivers innovative solutions to our customers, consistently outperforms our peers, produces predictable earnings for our customers, and provides a dynamic and challenging environment for our employees.
So, what's a manufacturer to do? Familiarize ourselves with producing textile testing equipment in various technologies.
GESTER International Co.,Limited agreed, noting that successful social marketing will become an even more important component of overall marketing strategies, and that marketers will have to think longer, harder and more creatively if they want to be able to fulfill the newly created potential of tensile tester manufacturers.
GESTER International Co.,Limited has unique staffs who will serve you with their best ideas by affording you with high-quality service.
1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.
2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.
C
Quick links