loading

Gester Instruments | Professional PPE, Footwear and  Textile Testing  Equipment Manufacturers Since 1997


Products
Test Standard

my country's textile industry will focus on planning during the 13th Five-Year Plan

Standard Group Textile Industry Information: my country's textile industry will focus on planning during the '13th Five-Year Plan' period. As a socialist market economy, China will launch an economic plan every five years to clarify the indicators and reform directions for economic and social development in the next five years. At the end of October last year, the Fifth Plenary Session of the Eighteenth Central Committee of the Communist Party of China adopted the 13th Five-Year Plan for China’s National Economic and Social Development (referred to as the “13th Five-Year Plan”). The primary task of building a well-off society. To accomplish this task, China’s economy must maintain a “medium-to-high-speed growth” level in the next five years. GDP will double by 2020 compared to ten years ago, reaching approximately US$12 trillion (approximately 78.6 trillion US dollars). Yuan Renminbi). The media pointed out that China’s economy is facing downward pressure. Last year’s GDP growth rate was only 6.9%. The official stated earlier that to achieve the goal of doubling GDP, China’s average annual economic growth rate in the next five years must be maintained at 6.5%. Bottom line. Wang Jianhui, deputy director of the Beijing Capital Securities Research Institute, analyzed that although it is inevitable to set GDP figures, the 13th Five-Year Plan as a whole is not expected to rely excessively on the formulation of goals, but will focus on solving difficult problems in China’s economy and society. . For example, the Chinese economy is facing the problem of overcapacity, and supply-side reform is the solution. He said that efforts to curb outdated production capacity have now been extended to the production lines of mainstream suppliers. This means that some first-line steel mills or enterprises have to cut production lines. Wang Jianhui said: “In the past, local small and medium-sized enterprises were involved, but now some state-owned enterprises are affected. The task is even more difficult and complicated. De-capacity does not mean closing the factory. There are also asset disposal, personnel training, job transfer, and renewal. Employment and subsequent debt issues are definitely more difficult than before.” Zong Liang, deputy general manager of the Strategic Development Department of Bank of China, pointed out that supply-side reform is a long-term goal. In the short and medium term, the authorities should also moderately expand aggregate demand to improve the economy. It can continue to grow within a reasonable range, creating favorable conditions for structural adjustment and optimization. This includes promoting the development of urbanization, exploring consumer market demand, and promoting the construction of the 'Belt and Road'.     Five of the overall goals are indispensable.      In addition to economic issues, Wang Jun, deputy director of the Consulting and Research Department of the China Center for International Economic Exchange, believes that this year's plan should draw up a set of comprehensive survey indicators to measure overall social development. He said: 'We are now not only focusing on GDP growth and total volume, but also focusing on the five development concepts of innovation, coordination, green, openness and sharing. This is an overall goal, and none of the five is indispensable.'     , for example, is common with economic development. The problem is the destruction of the ecological environment. Yuan Xin, a professor at the Institute of Population and Development of Nankai University, said that in the past 30 years, China has repeated the old path of first pollution and then governance in developed countries. Now it finally realizes that if it wants gold and silver mountains, it also wants green waters and mountains, economic growth cannot be achieved. At the expense of the environment. It is understood that the draft of the '13th Five-Year Plan' will list specific indicators for air pollution levels and water quality. Yuan Xin said: 'The green development and ecological civilization proposed in the 13th Five-Year Plan have raised the quality of economic growth to a new level. I think this is very important.' In terms of people’s livelihood, planning recommendations, by 2020, people’s lives The level and quality should be generally improved, the employment, education, culture, social security, medical, housing and other public service systems should be more complete, and the implementation of 'precise poverty alleviation and precision poverty alleviation' should be implemented to improve the effectiveness of poverty alleviation by implementing policies based on individual conditions.     The Central Poverty Alleviation and Development Work Conference in November last year promised that by 2020, more than 70 million rural poor people in China will be lifted out of poverty as scheduled, and all key counties will be eliminated. Wang Jun explained that no matter how developed the country's economy is, the results of development will eventually trickle down to ordinary people, which is the perfect ending.     The Politburo of the Communist Party of China held a meeting on the 22nd of last month to review the draft of the '13th Five-Year Plan' plan. The draft is expected to be reviewed and approved at the National Two Sessions starting this week.    The 'hole card' of stimulating the economy has been turned over. The Chinese government is facing more difficult challenges than in previous years.      The media analysis believes that the 'hole card' that helps economic development has almost been turned over, the current Chinese government is facing even more difficult challenges than in previous years. Therefore, if this leader can complete the '13th Five-Year Plan' tasks as scheduled, his historical achievements will be more distinctive.    Wang Jianhui said that although China’s past few governments have faced specific challenges during the ruling period, including high inflation, deflation, real estate bubbles, and the international financial crisis, on the whole, they have completed the tasks assigned to them by history as scheduled. This is because they have all undertaken the undeveloped resources left behind by the previous government as the driving force for economic growth.

GESTER International Co.,Limited is experienced in producing tensile tester manufacturers textile testing equipment products featuring topnotch quality with ODM services available. Welcome to visit our site at GESTER Instruments.

GESTER International Co.,Limited is a rapidly growing Manufacturing Company based in China. We offer a wide range of equipment that helps in tensile tester manufacturers which are safe, durable and economical. We provide textile testing equipment, tensile tester manufacturers, tensile tester manufacturers,etc. more about and textile testing equipment solutions are covered in GESTER Instruments. Take a visit!

GESTER International Co.,Limited has never compromised on the quality and the services provided to the customer.

GESTER International Co.,Limited offer various lines of products in line with international standards along with professionals who can offer suitable solutions pertaining to the existing problem in tensile tester manufacturers textile testing equipment.

GET IN TOUCH WITH Us
recommended articles
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
According to ASTM D642 Standard: Detailed Box Compression Strength Tester GT-N02A
The ASTM D642 standard defines the test method for determining the compressive resistance of shipping containers, like corrugated boxes, when faced with static compressive forces. This article details the test procedure and introduces the GESTER GT-N02A and GT-N02B Box Compression Testers, which are fully compliant with ASTM D642, ISO 12048, and TAPPI T804. These versatile machines perform destructive strength tests, constant value tests, and simulated long-term stacking tests to ensure your pac
What Are the Types of Color Fastness Testing for Fabrics?
Color fastness testing evaluates how well fabrics resist fading or bleeding under conditions like washing, rubbing, light exposure, and perspiration. Key tests include rubbing fastness, washing fastness, light fastness, perspiration fastness, and sublimation fastness. These tests ensure textiles maintain color integrity, prevent health risks, and meet quality standards. Learn about different testing methods and equipment used in the textile industry.
Everything You Need to Know About the Hydrostatic Head Tester
A hydrostatic head tester evaluates the waterproof capability of textiles, automotive interiors, and industrial materials. This guide covers its working principle, core components, global test standards (ISO, AATCC, EN), and a detailed testing procedure to ensure accurate results.
Everything You Need to Know About Programmable Temperature Humidity Chamber
A Programmable Temperature Humidity Chamber simulates environmental conditions to test product durability, stability (like shelf life & ageing), and performance across materials, electronics, automotive parts, food, and pharmaceuticals. This guide explains its five core systems (Control, Refrigeration, Heating, Humidity, Air Circulation) and their functions for precise testing.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
Mask Testing Equipment: Everything You Need to Know
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
A Complete Guide to Martindale Testing by the Best Martindale Abrasion Tester Supplier
Durability is critical for textiles and footwear, and Martindale testing is the gold standard for measuring abrasion resistance and pilling performance. This guide dives into Martindale testing’s core mechanics (Lissajous figure multi-directional friction), strategies to boost testing accuracy (sample clamping, load calibration, abrasive standardization), and compliance with international standards (ISO 12947, ASTM D4966, EN). As a top Martindale abrasion tester supplier with 25+ years of expertise, GESTER International delivers high-precision instruments (Martindale Abrasion Tester GT-C13B, etc.) certified to ISO 9001 and trusted by SGS, Bureau Veritas, and other global testing institutes. Beyond machinery, GESTER offers global technical support, on-site installation, and calibration services. The guide also includes a procurement framework to help labs select tailored Martindale testing solutions. For reliable, standard-compliant durability testing, GESTER is your trusted partner.
ISO 17694 / ISO 5402-1: Footwear Flexing Resistance Test Methods
Footwear soles and uppers endure thousands of flex cycles during use, risking premature cracking, delamination, or chipping if material resistance is inadequate. This technical analysis details two critical international standards:

1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.

2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.

C
What is the Safety Footwear Impact Tester & Why are They Important in Safety Shoes Testing
A Safety Footwear Impact Tester evaluates the impact resistance of safety shoes by striking the steel toe cap with 100J/200J kinetic energy, ensuring compliance with global standards (EN ISO 20344, ASTM F2412). It’s critical for verifying product protection, facilitating certification, and optimizing safety shoe design. GESTER Instruments offers reliable, user-friendly testers trusted by manufacturers and labs worldwide.
no data
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect