Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Precautions for the operation method of UV aging tester
The UV aging testing-equipment' target='_blank'>tester can quickly and truly reproduce the damage to materials caused by sunlight, rain and dew. It has a wide range of applications, such as: coatings, inks, paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, medicine, etc. The UV aging tester complies with the standards: ASTM D4329, ASTM D4587, ASTM D4799, ASTM D5208, ASTM G151, ASTM G154, EN 927-6, EN 1297, EN 1898 FIBC, EN 12224, EN 13523-10, ISO 4892-1, ISO 4892-3, ISO 11507, ISO 11895, ISO 11997-2, SAE J2020, prEN 1062-4. The scope of application of UV aging tester: Innovative design, compared with other UV fluorescent aging test boxes, achieves higher standards in terms of performance characteristics, ease of use, accuracy and safety, and its verification performance meets or even exceeds other brands . Multi-language touch screen interface, data collection through Ethernet connection, extremely safe, optional recirculation spray device. More other unique features that are easy to operate and use by users. Precautions for the operation of the UV aging tester: 1. The UV aging tester must be placed in a well-ventilated place, and cannot be installed in a dusty place, so that the equipment is covered with dust. 2. During the experiment, the operator is best to wear protective goggles and protective cover, because ultraviolet radiation has a strong hazard to the eyes of the operator. 3. During the test, it is necessary to maintain sufficient water source. 4. Minimize the time of opening the door during the test. 5. Do not subject the sensing device in the working room to strong impact. 6. When not in use for a long time, you must carefully check the water source, power supply and various components when you use it again, and start the equipment after confirming that there is no problem. 7. After the test is over, you need to drain the water in the test machine, and then dry the studio and the cabinet. 8. After the test, the plastic cover should be put on to prevent dust from sticking, and the UV aging tester should be cleaned regularly. 9. When the UV aging tester is not working, keep it dry and disconnect the power supply. 10. Non-professionals are not allowed to disassemble and assemble without permission in case of failure.
GESTER International Co.,Limited continued to crave a more intense, personalized workout experience.
Have you been looking for a good textile testing equipment tensile tester manufacturers provider? If so, we suggest that you check out GESTER International Co.,Limited at GESTER Instruments.
To properly understand what customers want, when, why and how they want it, GESTER International Co.,Limited needs to pivot toward sentiment analysis, a burgeoning technology that taps into consumer demand based on natural language processing.
Quick links