loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

Properties and uses of fibers commonly used in textiles

So far, cotton is still the main raw material for spinning, accounting for about 50% of spinning raw materials. Raw cotton has three categories: long-staple cotton, fine-staple cotton, and coarse-staple cotton, the latter of which has been basically eliminated. Long-staple cotton has long fibers, good quality and low output, and is only produced in Xinjiang in my country. The total amount of long-staple cotton produced in Egypt is the largest, and the quality is also good; the Pima cotton (PIMA) produced in the United States is also long-staple cotton. Long-staple cotton is mainly used in the manufacture of high-end textiles, such as high-count cotton underwear, shirts, T-shirts and other clothing. General textiles use fine-staple cotton. The performance characteristics of cotton fiber are that its strength is generally lower than that of synthetic fibers, but it has good hygroscopicity, air permeability, softness, good wearing performance, alkali resistance but not acid resistance, easy dyeing, insect resistance and mildew resistance. Comfortable to wear is its main advantage, suitable for underwear clothing and all kinds of commonly used clothing. The market share of cotton and chemical fiber blended products is very high, but pure cotton clothing is still the best choice for wearing comfort, safety, health and practicality. current“organic cotton”Has become the darling of the market. Its characteristics are not much different from ordinary cotton, but it is planted, processed, stored and sold in an organic way. It has strict requirements on soil, water source, fertilization and environment. It is certified by a special certification agency. It is a green and environmentally friendly product. The price is higher than ordinary cotton products, especially suitable for underwear, bedding, ladies' products. Colored cotton refers to colored cotton, which has been planted in my country as early as the Ming and Qing Dynasties. Under the influence of advocating natural ecology today, colored cotton products do not need to be dyed, the color is natural, the texture is soft, and there is no chemical pollution, making it an ideal textile raw material. At present, the color of colored cotton has developed a lot, but the color is not stable enough, not bright enough, the light fastness is poor, and the color spectrum is not complete. In addition, the color cotton planting yield is low, and there are many neps in spinning, so the development is limited. It is mainly used for Bedding such as underwear and towels are not widely used. There are many types of animal hair and wool fibers, but the main ones used for textiles are sheep wool, rabbit hair, cashmere, yak hair and so on. (1) Sheep wool Sheep wool fiber has many excellent properties, such as good elasticity, strong moisture absorption and moisture removal, good warmth retention, soft color, and can be used for the development of various types of clothing. However, wool fibers are acid and alkali resistant, and easy to be eaten by insects. . The finer the wool fiber, the better the quality, which is related to the variety of wool. Wool fiber has a high price and is mainly used to process high-end clothing, such as suits, coats, dresses, sweaters, scarves, etc. It is more popular that it is blended with chemical fiber products, which can learn from each other and reduce costs. Consumers should pay close attention to wool products of the gross content. (2) Cashmere (Cashmere) Cashmere is the fluff caught during the goat hair removal season. English called cashmere, very precious, known as“soft gold”. It is characterized by lightness, softness, good warmth retention, and comfortable wearing. It is generally used to weave high-end products such as cashmere sweaters, suits, coats, and scarves. Cashmere products are sold at extremely high prices. Consumers should pay attention to the labeling of the content of cashmere in clothing, and pay attention to daily wear and care, especially when wearing cashmere sweaters, be careful not to rub hard, otherwise it will be easily damaged. (3) Rabbit fur Rabbit fur is the fluff of Angora rabbits. The fiber is light, soft, fluffy, and has good warmth retention. Shirts, scarves, etc., should reduce friction when using to prevent hair loss. The most commonly used hemp fibers in hemp clothing are ramie, flax and hemp. The performance characteristics of hemp are that the fibers are rough and hard, have strong moisture absorption and dehumidification capabilities, are cool and comfortable to wear, and have natural antibacterial and anti-mite effects. Viscose fiber blend, especially suitable for weaving summer clothes. The fineness of flax fiber is finer than that of ramie, and the fineness and length of hemp fiber is between linen and ramie. Silk products commonly used in silk clothing are silk, also known as real silk, which is an ancient high-grade weaving material. Its characteristics are bright and gorgeous color, moisture absorption and breathability, elegant and soft, comfortable to wear close to the body, good to the skin, favored by ladies, and the first choice for high-end summer clothing. The disadvantage is that silk fabrics are more delicate and difficult to care for. In recent years, spun silk and spun silk made from waste cotton are often blended with cotton to make garments, which are called garments on the market.“cotton silk”, but the surface is rough; it is popular with consumers because of its affordable price and good performance. Regenerated cellulose fibers Traditional regenerated cellulose fibers, such as viscose fiber, acetate fiber and cupro fiber, are widely used in the clothing industry. Among them, viscose fiber is known as a blended and versatile fiber, and it is often blended with cotton and various fibers. Traditional viscose fibers have good spinnability and weaving properties, and are comfortable to wear. Consumers used to call them“rayon”, but the strength of viscose fiber is low, especially in wet state; when washing, the fabric becomes stiff due to fiber expansion, and the shrinkage rate is large, and the dimensional stability of the garment is poor. The traditional viscose fiber production pollutes the environment, so there have been many new green regenerated cellulose fibers with high strength and high wet modulus, as well as new regenerated vegetable protein fibers and lactic acid fibers.

GET IN TOUCH WITH Us
recommended articles
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
What is a Light Fastness Tester?
A Light Fastness Tester accelerates material aging by simulating sunlight (xenon lamps) and moisture to predict long-term durability. Used in textiles, automotive, plastics, and more, it follows AATCC TM 16, ISO 105-B02, and ASTM standards. Features include real-time light control, temperature/humidity regulation, and energy-efficient testing.
Why TDM Cut Test Machine GT-KC28 Is Needed in PPE Testing

Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.

By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.

The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
How to Improve Textile Quality with the Fabric Bursting Strength Tester
Ensure textile durability with the GT-C12A Fabric Bursting Strength Tester, a pneumatic testing device for woven/knitted fabrics, nonwovens, paper & leather. Compliant with ISO, ASTM, & JIS standards, it offers precise digital readings, automatic sensing, and intelligent software for quality control. Discover how this tester improves material performance & prevents defects in production.
Everything You Need to Know About Programmable Temperature Humidity Chamber
A Programmable Temperature Humidity Chamber simulates environmental conditions to test product durability, stability (like shelf life & ageing), and performance across materials, electronics, automotive parts, food, and pharmaceuticals. This guide explains its five core systems (Control, Refrigeration, Heating, Humidity, Air Circulation) and their functions for precise testing.
How to Improve the Accuracy of a Martindale Tester
Ensuring the accuracy of your Martindale abrasion and pilling tester is critical for reliable textile quality control. This guide details essential steps, from precise sample preparation and correct machine operation to routine maintenance. We also explore how advanced testers, like the GESTER model with its dual-servo drive and tool-free operation, are engineered to eliminate common sources of error and enhance testing precision for superior results.
Everything You Need to Know About the Hydrostatic Head Tester
A hydrostatic head tester evaluates the waterproof capability of textiles, automotive interiors, and industrial materials. This guide covers its working principle, core components, global test standards (ISO, AATCC, EN), and a detailed testing procedure to ensure accurate results.
What Are the ISTA Standard Tests and ISTA Testing Equipment?
ISTA (International Safe Transit Association) standard tests are globally recognized transportation packaging test procedures designed to evaluate the safety and reliability of products and their packaging throughout the logistics chain. By simulating real-world transportation conditions such as drops, vibration, impact, stacking, and compression, ISTA testing helps identify potential packaging weaknesses before products enter large-scale distribution. ISTA testing equipment—including drop testers, vibration testers, incline impact machines, and compression testers—plays a critical role in accurately reproducing these conditions under laboratory settings. Proper selection and use of ISTA-compliant equipment enable manufacturers to reduce transportation damage, lower return costs, enhance packaging design, and improve customer confidence in product quality and logistics safety.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect