Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Standard Operating Procedure for Ultraviolet Visible Spectrophotometer
1. In order to ensure the normal operation of the instrument and ensure the reliability of the results, this operating procedure is specially formulated.
2. Applicable scope: Laboratory
3. Responsible person: Laboratory technicians should strictly abide by the operating regulations, and the QC supervisor is responsible for supervising the implementation of this regulation. 4. Definition: no
5. Safety precautions: If organic solvents are used as solvents, attention should be paid to their harm to human health.
6. u200bu200bRegulations
6.1. Preparation
6.1.1 Turn on the machine: turn on the Sipper, 8453 detector, display, computer main computer and printer power supply, and the instrument warms up for 30-45 minutes.
6.1.2. Choose Windows NT Version 4.00.
6.1.3 Press 'Alt + Ctrl + Del' to log in.
6.1.4 Enter User Name: 'Administrator
6.1.5 Press the 'START' button, point Program with the mouse, then click HP-UV-Chemstation, enter the workstation status, and select 'Instrument on line'.
6.2. Test operation process
6.2.1 Tap the 'Mode' button in the dialog box, select the 'Standard' mode in the menu, select lamp under the 'Instrument' item, and turn on the deuterium lamp or the tungsten lamp.
6.2.2 Measurement of absorbance under fixed wavelength ·Tap Task key, and select 'Fixed Wavelength' in the menu.
·Tap the Set Up button beside the Fixed WL button and set the following measurement parameters: input and set the wavelength. Enter the background correction method. select the data mode.
·Tap the 'Sampling' dialog box and select 'Sipper' in its menu. ·Dip the 'Sipper' straw into the solvent used to prepare the test solution, tap 'Blank
·Immerse the 'Sipper' pipette into the sample solution, tap 'Sample' to scan the test solution, and measure the absorbance value of the sample under this wavelength.
6.2.3 Full-wavelength scan
·Tap the 'Task' box, and select 'spectrum/peaks' in the menu.
·Tap the 'Set Up' button to the right of 'spectrum/peaks' and set the following parameters: Number of absorption peaks and troughs. Wavelength range of scanning. Input the required data model (Data Mode)
.Select 'Sipper' from its menu.
·Immerse the 'Sipper' pipette in the solvent used to prepare the test solution, and tap 'Blank' to do a blank white scan.
·Dip the 'Sipper' pipette into the test solution, tap 'Sample' to scan the test solution and determine the absorbance value of the test solution.
6.2.4 Work curve method for content determination
·Tap the 'Task' dialog box and select 'Quantities'.
·Tap 'Set Up' next to it to set the following parameters. Enter the measured wavelength. Select the correction curve. Select Data Mode. Enter the corresponding unit.
·Tap the 'Sampling' dialog box and select 'Sipper' in its menu. ·Dip the 'Sipper' straw into the solvent used to prepare the test solution, and tap 'Blank' to do a blank white scan.
·Tap 'StandardTable
·Dip the 'Sipper' pipette into the test solution, tap 'Sample' on the lower left to scan the test solution, and measure the absorbance of the test solution at this wavelength.
·Tap 'SampleTable
6.3. End of work
6.3.1. Cleaning of the Sipper pipeline: first clean the pipeline with the solvent used for the sample to be tested, and then clean with pure water.
6.3.2. Print scan atlas and test data.
6.3.3. Exit UV-Chemistation, exit Windows-NT.
6.3.4. Turn off the machine in the reverse order of turning on, and cut off the power supply.
6.3.5. Fill in the usage record.
GESTER International Co.,Limited devises a regular, independent, transparent and objective assessment mechanism to evaluate country performance.
The guiding vision of GESTER International Co.,Limited is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.
GESTER International Co.,Limited is a initial company that supports expertise in searching marketing solutions.
The tensile tester manufacturers-type textile testing equipment is poised to lead the tensile tester manufacturers market.
When it comes to textile testing equipment tensile tester manufacturers, GESTER International Co.,Limited is the name to reckon with. Not only are they best, they are the most experienced as well and provide wide range of services as well as products at affordable prices. Find out more information on GESTER Instruments.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links