loading

Gester Instruments | Professional PPE, Footwear and  Textile Testing  Equipment Manufacturers Since 1997


Products
Test Standard

Technical Regulations and Standards on the Burning Performance of Textiles

Europe, America, Japan and other countries have long legislated the combustion performance of a series of textile products, including clothing fabrics, pajamas, children's pajamas, carpets, mattresses, curtains, etc., which require that they pass the combustion test before they can be produced and used; the United States The Consumer Product Safety Commission (CPSC) also legislates that all textiles used in high-rise buildings, aviation, shipping, hospital nursing homes, mass gathering places and flammable work areas must pass the flame resistance test. The following mainly introduces the corresponding technical regulations and standards of the United States, Canada, Japan, Europe and China. 1. The United States The United States passed the Flammable Fabric Act (FFA) as early as 1953, revised it in 1954 and 1967, and was enforced by the US Consumer Product Safety Commission (CPSC) (Table 2). Standards and regulations applicable to the scope of combustion performance technical requirements Remarks 16CFR1610 clothing textile flammability standard level 1: general flammability does not contain lint, soft hair, tufts and lint fabrics and other fabrics without raised fibers on the surface. The flame spread time is ≥3.5s. Can be used for clothing products. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is more than 7s or the surface burning is relatively rapid (within 0-7s), but the flame intensity cannot ignite or melt the substrate of the fabric. Grade 2: Moderately flammable fabrics containing lint, soft wool, tufts and lint, and other fabrics without raised fibers on the surface. The flame spread time is 4~7s (including the burning and melting time of the basal tissue). It can be used in clothing products, but should be used with caution, because the flammability test results of textile fabrics will vary with the characteristics of the fabric. Grade 3: Fast and violent burning of fabrics that do not contain lint, soft wool, tufts and lint, and other fabrics that do not have raised fibers on the surface. The flame spreading time is less than 4s. Such fabrics are considered to be flammable and dangerous, and cannot be used in clothing products because of their rapid and violent burning. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is less than 4s, and the flame intensity is sufficient to burn or melt the base tissue. 16CFR1615 Children's Pajamas Flammability Standard No. 0-6 Children's Pajamas and related materials. The average carbonization length of the 5 samples is less than or equal to 17.8cm (7”). The carbonization length of any of the 5 samples is less than or equal to 25.4cm (10”), that is, none of the samples can be completely burned. There is only one sampling method-conventional sampling method: a batch of 500 dozen. 16CFR1616 Flammability Standard for Children's Pajamas No. 0-6 Children's Pajamas and Related Materials, No. 7-14 Children's Pajamas and Related Materials. Two sampling methods: ①Conventional sampling method; ②Relaxed sampling method: 15 consecutive batches of qualified samples can be implemented with a relaxed sampling method: 1,000 dozen as a batch. 16CFR1630 Carpet and felt surface flammability standard carpets. The distance from the edge of the carbonized area of u200bu200ba single sample to any point on the edge of the metal frame (d20.3cm) is ≥2.54cm, then the sample is qualified; at least 7 of the 8 samples are the distance from the edge of the carbonized area to the edge of the metal frame >2.54cm, the carpet test is qualified. 16CFR1631 Small carpets and carpets surface flammability standard Small carpets: size ≤183cm, area ≤223m2. 16CFR1632 mattresses and mattresses flammability standards for various household mattresses, excluding those installed on vehicles Kind of mattress. If the carbonization length measured at the closest point to the cigarette in any direction on the surface of the mattress is ≤5.1cm, then the single cigarette test is partially qualified; generally 18 cigarettes are required to be lit for the test, and all parts of the test are qualified to qualify the mattress. 2. The Canadian regulations on textile flame retardancy are included in the dangerous goods laws and regulations, and Health Canada is responsible for sending inspectors to enforce them (Table 3). The scope of application of standards and regulations, combustion performance, technical requirements, hazardous products regulations, any flammable, toxic and other products that pose a threat to public health and safety, textiles and clothing also belong to the flat fabric of textile fiber products. Flame expansion time>3.5s. The surface is raised fabric. Flame expansion time> 4s. Children's pajamas, pillows, cots, cribs or other textiles used for sleep with size ≤14. Flame expansion time>7s. Hazardous Products (Children’s Pajamas) Regulations The average carbonization length of 5 samples of children’s pajamas is ≤178mm; the carbonization length of a maximum of 1 sample is equal to the overall length of the sample (254mm). Children's pajamas treated with flame retardant should be attached with a permanent label indicating the flame retardant, the cleaning process and the guarantee that the flame retardancy of the product will not be reduced after use. The Hazardous Products (Carpets) Regulations require that carpets have flammability warnings on their labels. Dangerous Products (Tent) Regulations. The damage length of the textile material floor material of the tent is ≤25mm; the continuous burning time of a single sample of the wall and ceiling materials is ≤4s, the average continuous burning time of the sample is ≤2s; the damage length of a single sample is ≤255mm , The average damage length of the sample varies according to the square meter weight of the sample and has a different specified range. The flame spread time of plush toys made of textile fiber materials in the Hazardous Products (Toys) Regulations is> 7s. If one of the five samples fails, another five samples will be tested. If two of the ten samples fail Qualified, the product is unqualified. Dangerous Products (Mattress) Regulations The length of carbonization or charring in any direction around the mattress cigarette is ≤50mm, and after the cigarette is extinguished, the sample continues to burn for ≤10min.

GESTER International Co.,Limited is specialized in sourcing tensile tester manufacturers textile testing equipment through its unparalleled worldwide network of supply. Go to GESTER Instruments, you will surely find your ideal at the most favorable price.

No, this isn't a wonder product and it won't be likely to change your life but it will give your tensile tester manufacturers a kick and bring the extraordinary to the every day. give it a shot at GESTER Instruments.

GESTER clearly and succinctly expresses what our company is all about. Strong brands cut through the noise to grab the audience and immediately shed light on the character of the product or service.

With the help of a tensile tester manufacturers textile testing equipment, tensile tester manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.

GET IN TOUCH WITH Us
recommended articles
Why TDM Cut Test Machine GT-KC28 Is Needed in PPE Testing

Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.

By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.

The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Top Features of a Certified TDM Cut Resistance Tester Supplier for Laboratory Use
The demand for precise PPE safety testing has surged with the evolution of protective gear, making TDM (Tomodynamometer) cut resistance testing a critical process for evaluating protective gloves and industrial textiles. This article details the top features of a certified TDM cut resistance tester supplier for laboratory use, including compliance with international standards (EN 388, ISO 13997, ASTM F2992), high-precision mechanical engineering, automated workflows, robust data management, and integrated safety features. It highlights GESTER International Co., Ltd.—a 20+ year experienced manufacturer with ISO 9001 certification and partnerships with SGS, Intertek, and TUV—as a leading supplier, offering the GT-KC28 TDM Cut Test Machine and comprehensive services (on-site installation, calibration, global technical support). For laboratories seeking reliable, standard-compliant testing solutions to validate PPE safety claims, this article provides actionable insights into strategic procurement. Visit https://www.gesterinstruments.com/ for more technical specifications and PPE testing solutions.
How to Choose Light Fastness Tester: Water-Cooled and Air-Cooled
Choosing between water-cooled and air-cooled light fastness testers depends on precision needs, budget, and application. Water-cooled testers (like GESTER GT-3000) offer superior spectral accuracy and stability for rigorous standards (e.g., automotive, coatings). Air-cooled models (like GESTER GT-D02A-1) provide energy efficiency and easier installation for routine QC. This guide compares cooling methods, features, and applications to help you select the optimal tester.
Shoes & Leather - Guangzhou 2025: GESTER Showcased Footwear testing Equipment on Site
GESTER impressed at Shoes & Leather Guangzhou 2025 by exhibiting high-precision footwear testing equipment like the DIN Abrasion Tester and Bally Flexing Tester, essential for quality control in shoe production. The event fostered industry collaboration, with GESTER attracting global buyers and strengthening partnerships.
Understanding the Color Fastness To Washing Testing Machine GT-D07
The GESTER GT-D07 Color Fastness To Washing Testing Machine is designed to evaluate the color durability of dyed fabrics under washing and dry-cleaning conditions. By simulating real washing processes, it helps determine how resistant a fabric is to fading and staining, ensuring consistency, reliability, and compliance with international standards. With stainless-steel construction, safety features, and precise temperature and timing control, the GT-D07 provides an efficient and standardized testing solution for textile manufacturers worldwide.
Everything You Need to Know About Programmable Temperature Humidity Chamber
A Programmable Temperature Humidity Chamber simulates environmental conditions to test product durability, stability (like shelf life & ageing), and performance across materials, electronics, automotive parts, food, and pharmaceuticals. This guide explains its five core systems (Control, Refrigeration, Heating, Humidity, Air Circulation) and their functions for precise testing.
Installation Training for the Incline Impact Tester GT-N49
Our expert team provides comprehensive on-site installation and training for the Incline Impact Tester GT-N49. This critical packaging testing equipment simulates real-world impacts during handling, transport, and stacking to evaluate product damage resistance. Learn about its key features like flexible moving plates, height adjustment, pneumatic angle control, and remote operation safety. Our service ensures proper setup, operational mastery, maintenance guidance, and troubleshooting support fo
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
What Are the Test Methods for Fabric Bursting Strength?
Fabric bursting strength measures resistance to rupture under concentrated load. Three primary test methods are used:

Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.

Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.

Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
How to Improve the Accuracy of a Martindale Tester
Ensuring the accuracy of your Martindale abrasion and pilling tester is critical for reliable textile quality control. This guide details essential steps, from precise sample preparation and correct machine operation to routine maintenance. We also explore how advanced testers, like the GESTER model with its dual-servo drive and tool-free operation, are engineered to eliminate common sources of error and enhance testing precision for superior results.
no data
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect