Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Breakthrough progress has been made in the combustion technology of large flame boilers of Harbin Institute of Technology
Technical Information of Combustion Testing Instruments: Research Results of Prof. Li Zhengqi's Research Group, School of Energy, Harbin Institute of Technology“Industrial application of improved multiple ejection staged combustion technology in 600 MW supercritical W-flame boiler”As a highlight article, it was published in Environmental Science and Technology, an internationally renowned journal in the field of environment, with an impact factor of 5.330. Harbin Institute of Technology is the first author and corresponding author of the paper. The number of W-flame boilers designed for burning lean coal and anthracite in my country accounts for more than 80% of the installed capacity in the world. In actual operation, W-flame boilers will have severe deflection of the lower furnace flame, large wall temperature deviation of the water wall, high nitrogen oxide emission concentration (up to 1200-1600 mg/m3 converted to 6% oxygen), and pulverized coal to varying degrees. Problems such as poor burnout (the content of combustibles in fly ash is 8%-15%) seriously affect the safety, environmental protection and economy of W flame boiler operation. Professor Li Zhengqi's research group proposed the multi-ejection staged combustion technology for W flame boilers, and is committed to comprehensively solving the above problems. The technology is applied to a 600 MW supercritical W-flame boiler. The industrial test results show that when anthracite (dry ash-free base volatile content is 10%), the opening of the exhaust air baffle is increased from 20% to 20%. When it increases to 70%, the flame symmetry of the lower furnace is good, the heat load distribution of the boiler is uniform, the wall temperature deviation of the water wall is small, the ignition distance of the dense coal powder airflow is reduced from 1.05 meters to 0.66 meters, and the content of combustibles in fly ash is increased from 5.65%. To 6.4%, the nitrogen oxide emission concentration at the furnace outlet is reduced from 702 mg/m3 (6% oxygen) to 575 mg/m3 (6% oxygen), and the exhaust gas temperature at the air preheater outlet is increased from 126.5 degrees. At 129 degrees, the boiler efficiency was reduced from 90.1% to 89.7%, and the fly ash combustible content and nitrogen oxide emission concentration were 6.18% and 589 mg/m3 (6% oxygen) under optimal conditions, respectively. Safety, environmental protection and economy have been greatly improved. The research results are of great significance for the development of W-flame boiler combustion technology with independent intellectual property rights in my country. More about : Combustion Test Instruments
The point for GESTER International Co.,Limited is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
At GESTER International Co.,Limited, we make sure everything we do honors that connection – from our commitment to the highest quality in the world, to the way we serve our customers and communities to do business responsibly. We are looking forward to becoming trusted supplier of every customer, inquire us at GESTER Instruments!
In terms of textile testing equipment, why is it different than other production? How does it fit a true need or desire for your requires? Is it simple to use? Make life easier?
GESTER International Co.,Limited is a initial company that supports expertise in searching marketing solutions.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links