loading

Gester Instruments | Professional Textile Testing Equipment Manufacturers Since 1997


Test Standard
Test Standard

Comparative Analysis on the Burning Performance Standards of Textiles in Various Countries

Europe, America, Japan and other countries have long legislated the combustion performance of a series of textile products, including clothing fabrics, pajamas, children's pajamas, carpets, mattresses, curtains, etc., which require that they pass the combustion test before they can be produced and used; the United States The Consumer Product Safety Commission (CPSC) also legislates that all textiles used in high-rise buildings, aviation, shipping, hospital nursing homes, mass gathering places and flammable work areas must pass the flame resistance test. The following mainly introduces the corresponding technical regulations and standards of the United States, Canada, Japan, Europe and China. 1. The United States The United States passed the Flammable Fabric Act (FFA) as early as 1953, revised it in 1954 and 1967, and was enforced by the US Consumer Product Safety Commission (CPSC) (Table 2). Standards and regulations applicable to the scope of combustion performance technical requirements Remarks 16CFR1610 clothing textile flammability standard level 1: general flammability does not contain lint, soft hair, tufts and lint fabrics and other fabrics without raised fibers on the surface. The flame spread time is ≥3.5s. Can be used for clothing products. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is more than 7s or the surface burning is relatively rapid (within 0-7s), but the flame intensity cannot ignite or melt the substrate of the fabric. Grade 2: Moderately flammable fabrics containing lint, soft wool, tufts and lint, and other fabrics without raised fibers on the surface. The flame spread time is 4~7s (including the burning and melting time of the basal tissue). It can be used in clothing products, but should be used with caution, because the flammability test results of textile fabrics will vary with the characteristics of the fabric. Grade 3: Fast and violent burning of fabrics that do not contain lint, soft wool, tufts and lint, and other fabrics that do not have raised fibers on the surface. The flame spreading time is less than 4s. Such fabrics are considered to be flammable and dangerous, and cannot be used in clothing products because of their rapid and violent burning. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is less than 4s, and the flame intensity is sufficient to burn or melt the base tissue. 16CFR1615 Children's Pajamas Flammability Standard No. 0-6 Children's Pajamas and related materials. The average carbonization length of the 5 samples is less than or equal to 17.8cm (7”). The carbonization length of any of the 5 samples is less than or equal to 25.4cm (10”), that is, none of the samples can be completely burned. There is only one sampling method-conventional sampling method: a batch of 500 dozen. 16CFR1616 Flammability Standard for Children's Pajamas No. 0-6 Children's Pajamas and Related Materials, No. 7-14 Children's Pajamas and Related Materials. Two sampling methods: ①Conventional sampling method; ②Relaxed sampling method: 15 consecutive batches of qualified samples can be implemented with a relaxed sampling method: 1,000 dozen as a batch. 16CFR1630 Carpet and felt surface flammability standard carpets. The distance from the edge of the carbonized area of u200bu200ba single sample to any point on the edge of the metal frame (d20.3cm) is ≥2.54cm, then the sample is qualified; at least 7 of the 8 samples are the distance from the edge of the carbonized area to the edge of the metal frame >2.54cm, the carpet test is qualified. 16CFR1631 Small carpets and carpets surface flammability standard Small carpets: size ≤183cm, area ≤223m2. 16CFR1632 mattresses and mattresses flammability standards for various household mattresses, excluding those installed on vehicles Kind of mattress. If the carbonization length measured at the closest point to the cigarette in any direction on the surface of the mattress is ≤5.1cm, then the single cigarette test is partially qualified; generally 18 cigarettes are required to be lit for the test, and all parts of the test are qualified to qualify the mattress. 2. The Canadian regulations on textile flame retardancy are included in the dangerous goods laws and regulations, and Health Canada is responsible for sending inspectors to enforce them (Table 3). The scope of application of standards and regulations, combustion performance, technical requirements, hazardous products regulations, any flammable, toxic and other products that pose a threat to public health and safety, textiles and clothing also belong to the flat fabric of textile fiber products. Flame expansion time>3.5s. The surface is raised fabric. Flame expansion time> 4s. Children's pajamas, pillows, cots, cribs or other textiles used for sleep with size ≤14. Flame expansion time>7s. Hazardous Products (Children’s Pajamas) Regulations The average carbonization length of 5 samples of children’s pajamas is ≤178mm; the carbonization length of a maximum of 1 sample is equal to the overall length of the sample (254mm). Children's pajamas treated with flame retardant should be attached with a permanent label indicating the flame retardant, the cleaning process and the guarantee that the flame retardancy of the product will not be reduced after use. The Hazardous Products (Carpets) Regulations require that carpets have flammability warnings on their labels. Dangerous Products (Tent) Regulations. The damage length of the textile material floor material of the tent is ≤25mm; the continuous burning time of a single sample of the wall and ceiling materials is ≤4s, the average continuous burning time of the sample is ≤2s; the damage length of a single sample is ≤255mm , The average damage length of the sample varies according to the square meter weight of the sample and has a different specified range. The flame spread time of plush toys made of textile fiber materials in the Hazardous Products (Toys) Regulations is> 7s. If one of the five samples fails, another five samples will be tested. If two of the ten samples fail Qualified, the product is unqualified. Dangerous Products (Mattress) Regulations The length of carbonization or charring in any direction around the mattress cigarette is ≤50mm, and after the cigarette is extinguished, the sample continues to burn for ≤10min.

There are a wide variety of which are scientifically tested to have positive effects on the ability to tensile tester manufacturers. tensile tester manufacturers textile testing equipment is one of them.

So, get ready to dazzle the world with a wide range of tensile tester manufacturers textile testing equipment! Buy one today!! Visit GESTER International Co.,Limited at GESTER Instruments.

Deeper connections between GESTER and textile testing equipmentare made when you go beyond the white lights of a corporate space.

GET IN TOUCH WITH Us
recommended articles
Understanding 3 Positions DIN Abrasion Tester : A Comprehensive Guide
This comprehensive guide explains the 3-Position DIN Abrasion Tester, a rotary drum instrument simulating real-world wear to quantify material abrasion resistance. Learn its working principle (mass/volume loss measurement under controlled friction), key features (touch-screen control, automated dust cleaning), and applications across rubber, tires, footwear, and conveyor belts. Discover compliant standards (DIN 53516, ISO 4649, ASTM D5963), step-by-step operation procedures, and essential mainte
Installation Training for the Incline Impact Tester GT-N49
Our expert team provides comprehensive on-site installation and training for the Incline Impact Tester GT-N49. This critical packaging testing equipment simulates real-world impacts during handling, transport, and stacking to evaluate product damage resistance. Learn about its key features like flexible moving plates, height adjustment, pneumatic angle control, and remote operation safety. Our service ensures proper setup, operational mastery, maintenance guidance, and troubleshooting support fo
What are The Flame Retardant Test Methods ?
Flame retardant testing evaluates materials' ability to resist ignition and slow fire spread. This guide covers key textile test methods (45°, horizontal, vertical), standards (ASTM, ISO, BS), and equipment like flammability testers for upholstery, carpets, and fabrics.
Understanding UV Aging Chambers: Applications, Features, and Advantages
The GT-C29 UV Aging Chamber simulates years of environmental damage in days using UVA-340 lamps, rain, and temperature cycles. Ideal for paints, plastics, automotive, and wood industries, it offers high accuracy, cost efficiency, and safety. Learn how it accelerates R&D and quality control.
How to Know the Fabric Shrinkage Test for Your Projects
Master fabric shrinkage testing with this definitive guide. Understand causes of shrinkage, industry standards (ISO, GB, AATCC), step-by-step testing methods using Wascator equipment, and strategies to minimize shrinkage for superior garment quality and customer satisfaction.
Fabrics Specification Parameters and Testing Standards : A Complete Guide
These specifications outline the physical, mechanical, and functional characteristics of fabrics, while testing standards ensure that fabrics meet these predefined criteria. This synergy is vital in influencing manufacturing efficiency and end-user satisfaction, ensuring that products meet performance expectations across diverse applications.
DTG Spotlight: GESTER’s Precision Textile Testing Instruments
At GESTER, we offer cutting-edge textile testing instruments designed for quality assurance in textile production. Showcased at DTG, our instruments like fabric tensile strength testers, Martindale abrasion testers, and color fastness testing equipment ensure textile durability, consistency, and compliance with global standards. With precision testing, GESTER helps manufacturers meet industry demands and deliver top-tier products.
How to Choose Light Fastness Tester: Water-Cooled and Air-Cooled
Choosing between water-cooled and air-cooled light fastness testers depends on precision needs, budget, and application. Water-cooled testers (like GESTER GT-3000) offer superior spectral accuracy and stability for rigorous standards (e.g., automotive, coatings). Air-cooled models (like GESTER GT-D02A-1) provide energy efficiency and easier installation for routine QC. This guide compares cooling methods, features, and applications to help you select the optimal tester.
GESTER's Success at Shoes & Leather - Vietnam 2025
GESTER successfully participated in Shoes & Leather Vietnam 2025 (July 9-11), showcasing cutting-edge footwear testing machines. Visitors explored equipment like the Bally Resistance Flexing Tester and Martindale Abrasion Tester, with many expressing strong collaboration interest. Learn more about GESTER’s innovative solutions for the footwear industry.
Welcom UK Client Visits GESTER: A Journey of Partnership
GESTER specializes in R&D and production of advanced textile testing equipment, covering fabric, yarn, color fastness, and flammability tests. Our UK client visit highlights our commitment to quality, customization, and efficient service, reinforcing trust for long-term partnerships.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect