Snap Button Pull Test Machine GT-C09

This Snap Button Pull Test Machine GT-C09 Operation video.

How to Operate the Snap Button Pull Test Machine GT-C09?

Ensuring garment safety and quality is critical, particularly when it comes to securing buttons, push-buttons, and fixed accessories. The Snap Button Pull Test Machine GT-C09 is designed to help manufacturers verify the durability and strength of these accessories, ensuring they meet the required safety standards. This video explains how to operate the Snap Button Pull Test Machine efficiently.

Why Snap Button Testing Matters

The snap button pull test helps define the manufacturer's responsibility to prevent buttons or accessories from falling off garments, which could pose a choking hazard to infants. By conducting tensile strength tests, manufacturers can confirm whether buttons or fasteners on garments are securely fixed to meet safety regulations.

Principles of the Pull Test

The Snap Button Pull Test Machine operates by applying vertical tensile force to buttons or accessories to assess their durability. Two primary methods are commonly used:

Fixed Load Test Method

Mount the garment sample with its accessory in the lower grip.

Attach the appropriate upper grip to the force gauge.

Apply a specific force (e.g., 15LB) for a fixed duration.

Inspect if the button or accessory is damaged or dislodged.

Pull-Off Force Test Method

Similar to the fixed load test setup, but instead of holding the load for a certain duration, pull the accessory until it detaches.

Measure the maximum force required for the detachment.

Step-by-Step Testing Process

1. Setup

Turn on the GT-C09 Snap Button Pull Test Machine and ensure all components are properly calibrated.

Select appropriate grips for your test sample.

2. Mounting the Sample

Secure the garment sample in the lower grip.

Attach the accessory to the upper grip, ensuring proper alignment for accurate force application.

3. Testing

Initiate the Snap Button Pull Test Machine to apply the required force based on the test type.

Monitor the force gauge during the pull test to observe the force applied and evaluate detachment strength.

4. Results Analysis

Assess whether the button or accessory stayed intact, exhibited damage, or detached.

Record the force value and compare it with safety standards.

Invest in the GT-C09 Snap Button Pull Test Machine today to enhance your garment testing process and maintain the highest standards in accessory safety.