Application
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on garments must pass snap button strength test. This Tensile Tester machine can do even and vertical tensile test of all kinds of buttons on garments. Test fastness degree of button reach relative security standard or not.
Gester Snap Button Pull Test Machine is used to test pull strength of ornaments on garment, toy, footwear and others including button, bow and etc. Snap button pull test is a must-do test especially for Baby and children’s clothing and shoes. The test aims to use to button snap pull tester with suitable grips to pull the ornament to know if the ornament would be pulled off garment or not. The ornament falling off or broken button may cause infants or children the risk of ingestion. The button pull test methods includes 16CFR1500.51-53, ASTM PS79-96, ASTM F963, EN 71-1,M&S P115A and etc.
Feature
2.Moreover, a standard weight is also offered so that it can be regularly checked if it meets the safety requirements.
Procedure & Principle of Pull Test
snap button pull tester is a portable tensile tester to do vertical tensile test. Snap button pull test method 1: Amount the sample with ornament in lower grip and choose the suitable upper grips to fix on the force gauge. Clamp the ornament and apply certain force(for example: 15LB) to pull test the ornament for certain time, and then to check if the ornament is off or damaged or not. Method 2: pull the ornament off to know the force of pull off.
Accessories
Standard accessories | 1pc | IMADA Force Gauge FB-30K |
1pc | GT-MC01 Upper Universal Grip | |
1pc | GT-MC02 Upper Stud Grip | |
1pc | GT-MC03 Lower Fabric Clamp & Level Arm Locking | |
1pc | GT-MC04 Lower Grasp Button Accessory Kit | |
1pc | GT-MC05 Calibration Weight 15LB | |
1pc | GT-M37 Three Pronged Grip | |
1pc | GT-M43 Upper Long Nose Vise Grip | |
Optional accessories
| Optional | GT-M36 Two Pronged Clamp |
Optional | GT-M39 Flat Clamp | |
Optional | GT-M49 Short - Mouth Clamp | |
Optional | GT-M50 Seam Clamp | |
Optional | GT-M53 Wide - Mouth Clamp | |
Optional | GT-MC06 Multifunction Vise Clamp | |
Optional | GT-MC07 ASTM Zipper Test Kit | |
Optional | GT-MC09 Clamps for ASTM D4846 |
Specification
Dimensions: | 26 x 31 x 82 cm |
Net Weight: | 32kg |
Standards | 16 CFR 1500.51-53, ASTM PS79-96, D4846 |
Copyright © 2019 GESTER International Co.,Limited | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.