loading

Gester Instruments | Professional PPE, Footwear and  Textile Testing  Equipment Manufacturers Since 1997


Products
Test Standard

The core cabin of 'Tianhe' rushed to the blue sky, carrying a lot of 'black technology'

At about 11:00 on April 29, 2021, with the expectation of hundreds of millions of Chinese people, the Long March 5B Yao-2 carrier rocket carrying the Tianhe core module of the space station was ignited and lifted off at the Wenchang Space Launch Site in my country. The capsule was successfully separated from the rocket and entered the predetermined orbit. After that, the two wings of the solar panel were successfully deployed and worked normally. The launch mission was a complete success. It is reported that China's space station is named as“Tiangong”. The entire space station adopts a horizontally symmetrical T-shaped configuration and will consist of a core module and two experimental modules. The Tianhe core cabin has a take-off mass of 22.5 tons, a total length of 16.6 meters, and a maximum diameter of 4.2 meters. It consists of a node cabin, a small column section, a large column section, a rear channel and a resource cabin. As the core module, Tianhe is the main control module of the space station, the management and control center, and the main place for astronauts to live. It is responsible for the power circuit, environmental control, and life support functions of the entire space station, including gas pressure, composition, temperature, humidity adjustment, water recycling management, microbial control and waste management, etc., which can meet the needs of astronauts for long-term space flight. Daily needs. In addition, the Tianhe core cabin has a large robotic arm, and the slender part in front of it is the node cabin. The tail of the Tianhe core module can be connected to a cargo spacecraft. During the construction of the space station, the docking port of the node cabin port of the Tianhe core cabin will first complete the docking with the experimental cabin; then the experimental cabin will be transferred to the left/left of the node cabin through the operation of the transposition base or the robotic arm. The two berthing ports on the right side enable long-term parking. Tianhe is worth looking forward to. The black technology of instrumentation is indispensable. It is understood that Tianhe has 4 core technologies, equipped with electric propulsion engines, followed by solar cells with high photoelectric conversion efficiency, and of course a degree of freedom machine. Arm, and finally equipped with 16 large scientific research combination cabinets. It can be said that the advent of Tianhe means that China has made new achievements in the construction of the space station. In addition to the above technologies, Tianhe also carries a measurement system camera device, which is installed in various parts of the rocket, mainly for monitoring. During the launch of the rocket, the engine compartment, booster separation, fairing separation, star-rocket separation and other working processes are provided, and real-time video images are provided to provide clear and accurate image monitoring for the rocket's launch process. The mobile photoelectric tracking and measurement equipment participated in the drift measurement and scene recording tasks during the launch process, providing important information and data for the space station sky and core module launch drift measurement and scene recording work. In addition, the dual-channel gas chromatograph is an important component of the space station's environmental control, health and maintenance system, and is used for online monitoring of trace volatile organic compounds in the cabin air. Its dual channels work independently, and can simultaneously analyze more than 50 organic components in one sampling. It can also be used in conjunction with a mass spectrometer. It is an indispensable product to ensure the safe survival of astronauts in orbit. The dual-channel gas chromatograph is small in size, light in weight and low in power consumption, and realizes the localization of key components. It will provide technical support and support for the environmental control and life-protection system of the Chinese space station, and provide support for the development of deep space exploration analysis and detection support equipment in my country. accumulated technology.

GET IN TOUCH WITH Us
recommended articles
Analysis of Pilling Influencing Factors and Testing Methods
Pilling testing plays a vital role in textile quality control, helping manufacturers evaluate and improve the wear performance of fabrics. Through the use of advanced instruments like ICI Pilling Box Test Method (GT-C18) , Martindale Abrasion Test Method (GT-C13B) , and Random Tumble Pilling Test Method (GT-C19A) , laboratories can conduct precise and standardized assessments, ensuring that final textile products deliver superior appearance, comfort, and longevity.
Mask Testing Equipment: Everything You Need to Know
This article comprehensively introduces mask testing equipment, including its definition, application significance, core international testing standards, main equipment types and functional characteristics. It also puts forward a step-by-step selection guide and common selection misunderstandings, providing a reference for mask manufacturers, third-party testing institutions and regulatory departments to select appropriate testing equipment, so as to ensure mask product quality, pass international certification and protect user safety.
What Are the Types of Color Fastness Testing for Fabrics?
Color fastness testing evaluates how well fabrics resist fading or bleeding under conditions like washing, rubbing, light exposure, and perspiration. Key tests include rubbing fastness, washing fastness, light fastness, perspiration fastness, and sublimation fastness. These tests ensure textiles maintain color integrity, prevent health risks, and meet quality standards. Learn about different testing methods and equipment used in the textile industry.
Everything You Need to Know About Programmable Temperature Humidity Chamber
A Programmable Temperature Humidity Chamber simulates environmental conditions to test product durability, stability (like shelf life & ageing), and performance across materials, electronics, automotive parts, food, and pharmaceuticals. This guide explains its five core systems (Control, Refrigeration, Heating, Humidity, Air Circulation) and their functions for precise testing.
PPE Trends: Insights from a China Top PPE Testing Machine Company
As 2026 approaches, the global PPE industry is transformed by stricter industrial safety regulations, healthcare awareness, and evolving international standards (ISO/ASTM/EN). Key trends include the rise of Smart PPE, adoption of sustainable bio-based materials, and converging global compliance requirements—demanding high-precision, automated testing equipment with data traceability. GESTER International Co., Ltd., a China top PPE testing machine company with 25+ years of expertise, addresses these challenges through modular, standards-aligned solutions (e.g., TPP Thermal Protection Tester GT-RC02A, TDM Cut Test Machine GT-KC28) and long-term partnerships with SGS, TUV, and Intertek. Offering global technical support (installation, calibration, training) and automated, multi-standard-compatible equipment, GESTER empowers PPE manufacturers to meet 2026’s rigorous safety benchmarks. This article explores PPE performance evolution, 2026 industry trends, technological testing responses, and strategic procurement tips—emphasizing how China’s leading testing machine providers bridge hardware innovation with global compliance to protect human life. For professional PPE testing solutions, visit https://www.gesterinstruments.com/.
Elmendorf Tearing Strength Tester GT-C11A You Should Know
The Elmendorf Tearing Strength Tester GT-C11A is a pivotal instrument for evaluating the tearing resistance of various materials, including textiles, non-wovens, paper, and films. Utilizing the proven pendulum method, it delivers precise, repeatable data crucial for quality assurance, product development, and compliance with international standards like ASTM and ISO. This article explores its working principle, key features such as automated testing and pneumatic clamping, and its wide-ranging applications across multiple industries, highlighting why the GT-C11A is a trusted choice for professionals seeking reliable and efficient material performance analysis.
Shoes & Leather - Guangzhou 2025: GESTER Showcased Footwear testing Equipment on Site
GESTER impressed at Shoes & Leather Guangzhou 2025 by exhibiting high-precision footwear testing equipment like the DIN Abrasion Tester and Bally Flexing Tester, essential for quality control in shoe production. The event fostered industry collaboration, with GESTER attracting global buyers and strengthening partnerships.
What is a Light Fastness Tester?
A Light Fastness Tester accelerates material aging by simulating sunlight (xenon lamps) and moisture to predict long-term durability. Used in textiles, automotive, plastics, and more, it follows AATCC TM 16, ISO 105-B02, and ASTM standards. Features include real-time light control, temperature/humidity regulation, and energy-efficient testing.
Strengthening Safety Standards: The Role of a PPE Testing Equipment Supplier at A+A
The A+A Trade Fair in Düsseldorf (2026) highlights tightening global PPE safety regulations, shifting the industry from basic compliance to comprehensive performance verification. As international standards (ISO, EN, ASTM) become more granular, professional PPE testing equipment suppliers like GESTER play a pivotal role in bridging theoretical standards and practical implementation. GESTER’s high-precision, multi-standard testing tools (covering cut resistance, thermal protection, liquid penetration, etc.), backed by ISO 9001 certification and partnerships with SGS/TUV, ensure data traceability, reliability, and compliance. With 20+ years of expertise, modular innovation, and holistic service (calibration, training), the supplier supports manufacturers and laboratories in meeting stringent safety benchmarks, enabling global market entry and safeguarding worker lives. Strategic procurement of such future-ready equipment is key to long-term occupational safety success.
Technical Insight: How a Professional EN388 Gloves Tester Company Evaluates Durability
In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.
no data
Quanzhou Gester International Co.,Ltd gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat
Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86(0)18059985379
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect