loading
Accelerated Weathering Tester UV Aging Chamber GT-C29 1
Accelerated Weathering Tester UV Aging Chamber GT-C29 2
Accelerated Weathering Tester UV Aging Chamber GT-C29 3
Accelerated Weathering Tester UV Aging Chamber GT-C29 1
Accelerated Weathering Tester UV Aging Chamber GT-C29 2
Accelerated Weathering Tester UV Aging Chamber GT-C29 3

Accelerated Weathering Tester UV Aging Chamber GT-C29

    oops...!

    no product data.

    Go to homepage
    Accelerated Weathering Tester UV Aging Chamber GT-C29 4

    Accelerated Weathering Tester Application GT-C29

    The GT-C29 Intelligent UV Accelerated Weathering Tester employs UVA-340 fluorescent UV lamps to replicate the harmful effects of sunlight, rain, and dew.

    This UV Aging Chamber operates by combining ultraviolet rays, rain, high temperatures, condensation, and darkness in a cyclical process. By repeating these cycles, the device can simulate years of weathering in just a few days or weeks. The resulting damage includes color fading, discoloration, chalkiness, cracking, muddiness, bubbling, embrittlement, loss of intensity, and oxidation.

    Standards

    ASTM G154, ASTMD 4329, ISO 16474-3,

    ISO 4892-1, ISO 11507, ISO4892-3, ISO11997-2,

    GB/T16422.3, GB/T16585, GB/T 14522-93

    UV Aging Chamber Feature

    1. The case is made from numerical control equipment,which is with advanced technology, smooth lines, beautifully designed.
    2. Material of the cabinet is thickness 1.2mm, SUS304# advanced stainless steel.
    3. Air channel in the cabinet applies single-cycle system and a import axial flow fan improves the air flow ability of light, heating ability, and also significantly improves the temperature uniformity in the test chamber.
    4. Lamp: the dedicated ultraviolet, UVA-340 or UVB-313(option), 8 lamps, 4 on each side with a total of 2 sides,40W/1
    5. Lamp lifetime: above1600h
    6. Water source and consumption: about 8 L tap water or distilled water every day.
    7. The temperature of the test chamber was measured by sensor on blackboard( fixed width 75㎜, height 100㎜, thickness 1.5㎜), this blackboard need to be put the center area of exposure test, temperature gauge measure range is 30~80℃, tolerance is ±1℃. Illumination, condensation need to proceed separately, condensation controlled by heating the water temperature.
    8. The specimen holder is made of stainless steel and aluminium alloy.
    9. Bottom of unit is fixed by high quality PU running wheel.
    10. Drainage system drains water with U type deposition device.
    11. The test sample surface is in parallel with UV light plane.
    12. Installation of automatic sprinkler inside the spray system, water pressure can be adjusted
    13. The power uses the residual current circuit-breaker for control loop, overload and short circuit alarm, over temperature alarm, water shortage protection.

    Accelerated Weathering Tester UV Aging Chamber GT-C29 5

    Accelerated Weathering Tester Key Specification


    Model

    GT-C29

    Control Mode

    PLC+Touch Screen Control

    Temperature Range

    RT+10℃~70℃

    Humidity Range

    ≥75%RH

    Temperature Uniformity

    ±3℃

    Temperature Fluctuation

    ±0.5℃

    Test Chamber Space

    500 ×1140×400mm

    Center Distance Inside Lamp

    65~70mm

    Center Distance Between Specimen and Lamp

    55mm

    Irradiance

    0.3~1.3W/m2, (Set  irradiance on the touch screen)

    Irradiance Control

    Imported irradiance intelligent control, real-time feedback of irradiance value was real-time detected by irradiance sensor, compared with the set  irradiance on the touch screen, and then the lamp ballast is controlled by the output voltage of the PLC, finally control the brightness of the lamp. in order to adjust the irradiance PID setting, to automatically compensate the set value.

    Irradiance Calibration Hole

    Reserve one

    Curve

    Temperature and irradiance curve display

    Test cycle of Illumination, Condensation, and Water Spray Test      

    Can be adjusted

    Lamp

    L=1200mm /40W, 8 (UVA/UVB, lifetime above1600h)

    Black Panel Thermometer Testing Range

    30~80℃

    Black Panel Thermometer Monitoring

    Standard Pt-100 black panel thermometer sensor

    Specimen Dimension

    75×150mm

    Specimen Holder Number

    21

    Depth of Water Channel

    25mm

    Ultraviolet Wavelength

    UVA

    315-400nm


    UVB

    280-315nm

    Test Time

    0~999H (can be adjusted)

    Spray

    Automatic Spray Function

    Safety Protection

    Protective door lock, over-temperature, low water level alarm, leakage, short circuit, Over current protection

    Power Supply

    AC 220V 50/60HZ

    Dimension(L×W×H)  

    1400×660×1550mm 

    Weight

    200 kg


    Accessories

    Standard accessories

     

    1Set

    Specimen Fixture

    1Set

    UVA-340  8 pcs

    Optional accessories

     

    Optional

    UVB-313  8 pcs

    Optional

    Irradiance Meter


    Contact Us Now

    If you have any questions, please feel free to contact us

    Get in touch with us
    Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
    Related Products
    no data
    QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
    WeChat
     

    Products

    Contact us
    Tel: +86-595-28886108 
    Fax: +86-595-22515221
    E-mail: sales10@gester-instruments.com,
                     info@gester-instruments.com
    Mobile/Whatapp/ Wechat:  
                    + 86 18059985379    
    Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
    Customer service
    detect