Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Congratulations and rev. Yang detection successful cooperation
Choose to cooperate with companies recently, kai Yang detection, successful order we enter type constant temperature and humidity laboratory equipment, etc. Here, thank you very much qi Yang testing company on the jester's trust and support, we will continue to do a good job of service! City kai Yang detection technology co. , LTD. Is a set of testing, inspection, certification, rectification, problem analysis, technical advice, factory counseling, calibration, system service is a body comprehensive professional services, including electronic appliances, auto parts, batteries, shoes, textiles, leather products, accessories, plastic hardware, handicrafts, stationery, toys, air, chemicals, food safety certification testing agency service, etc. Certification program including CCC, CQC, CB, CE, CSC, ISO, UL, GS, ETL, CSA, VDE, TUV, SASO, GOST, PSE, furniture is environmental protection certification, product technical service, etc. The following simple introduction for you enter type under constant temperature and humidity test chamber, walk-in constant temperature and humidity test chamber can be accurately simulated low temperature, high temperature, high temperature and high humidity, low temperature and humidity complex natural environment, such as applicable to electronic, electrical appliances, battery pack, LED, plastics, food, paper products, vehicles, metals, chemicals, building materials, semi-finished products and finished products testing temperature and humidity environment. The equipment of refrigeration, heating, moisture, and supplement with wet water, fully automatic control, can be attached ( Optional) Transaired function, can have a bad play in the internal gas allows the personnel in internal operation for a long time. According to GB 2423, IEC6008 - 2 - 1、GB / T 2423 ( IEC68- 2 - 3) 2424年GBT GJB 150 GB / T 10589、GB / T5170。 18, GB/T10586 test standard design and manufacture. Laboratory test space size have 4 ml, 8 ml, 10 ml, 15 ml, 20 ml, 30 ml, 40 ml and various specifications. Adopt imported from South Korea TEMI series control system or Japanese OYO series control system, the temperature range of - 70 ℃ ~ + 85 ℃, 20% RH to 95% RH humidity range, choose air-cooled or water-cooled cooling way. Main technical parameters: walk-in constant temperature and humidity laboratory control system imported from South Korea TEMI series control system or temperature range - Japan OYO series control system 70℃/- 60℃/- 50℃/- 40℃/- 20 ℃ / 0 ℃ ~ + 85 ℃ and humidity range 0 20% RH to 95% RH temperature resolution. 01 ℃ temperature fluctuation degree & le; ± 0. 5 ℃ temperature deviation & le; ± 2. 0 0 ℃, humidity resolution. 1% r。 H humidity deviation & le; ± 3% RH heating rate 3 ℃ / min ( Light, the average temperature) The cooling rate of 1 ℃ / min ( No load, average temperature, 2 ~ 10 ℃ / min) for special use conditions Box inside stainless steel SUS304 mirror carton SUS304 stainless steel or cold rolled steel sheet double high temperature electrostatic pensu processing insulation resistance to high temperature and high density polyurethane rigid foam insulation material data interface Ethernet front-end ports, USB, can realize remote computer control cooling way air-cooled or water-cooled taikang compressor imported from France or Germany than double segment hazel closed, semi-closed compressor, with energy regulator device protection without fuse switch, compressor overload protection switch, refrigerant high and low voltage protection switch, super humidity overtemperature protection switch, fuse, fault warning system jester company specialized custom enter type constant temperature and humidity laboratory, custom large high low temperature test chamber, walk-in high and low temperature box, rapid temperature test chamber and other environmental testing equipment. Welcome any inquires! This article from the jester testing equipment company, reprint please indicate the url: https://www. gesterinstruments。 Com/tags: & nbsp walk-in constant temperature and humidity laboratory & NBSP constant temperature and humidity test chamber & NBSP environment chamber
GESTER International Co.,Limited highlighted the need to foster a human openness to technological innovation.
The expert engineers of GESTER International Co.,Limited always develop with utmost precision so that all quality standards are met during the production. we are looking forward to becoming a trusted supplier of customers. visit us at GESTER.
GESTER International Co.,Limited has never conceded on the quality and the services of the products which provided to the customer.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Quick links