Gester Instruments | Professional Textile Testing Equipment Manufacturers Since 1997
How to test the oil content of chemical fiber yarn?
Today, we will discuss with the editor of Changzhou No.1 Textiles the experimental process of the oil content of chemical fiber filaments and some points to note.
1. Before the test, clean and dry the round-bottomed flask and the grease extractor, and weigh the dry weight of the round-bottomed flask.
2. Randomly select two wool (or chemical fibers) from the test samples, each weighing 5g (chemical fiber 3g), and make parallel tests.
3. Wrap the sample into a cylindrical shape with degreasing filter paper and put it into the extractor, the height of the cylindrical shape is lower than the overflow. The solvent is poured into the round-bottom flask, the whole set of equipment is connected and placed on the electric heating constant temperature water bath, the condenser is connected to the circulating condensate water.
4. Turn on the power of the water bath, adjust the temperature of the water bath according to the boiling point of the solvent, and the solvent will continue to reflux. The total number of reflux times and use time are determined according to the selected solvent, generally 12~18 times of reflux (18 times of ether, no less than 2 times; 12 times of carbon tetrachloride and phenyl alcohol, no less than 3 hours) The oil in the sample is fully washed.
5. After the extraction is completed, take out the sample, distill and recover the solvent, put the grease and the sample left in the round bottom flask into a 105 20C oven and bake to constant weight (generally bake 2~2.5h), and weigh the flask and the grease The weight and the dry weight of the sample, all weighing must be accurate to 0.001g. 6. The actual oil content of the sample should be calculated on the average of the test results of the two samples. If the difference between the two results is that the oil top exceeds 0.5% and the dry top exceeds 0.2%, the third sample test should be carried out. , And finally calculate the average of 3 test results. If the difference between the two samples of fiber finish is more than 2.5% of the average, re-sampling must be performed and a parallel test shall be carried out. Finally, the results of 4 times are averaged.
There are also the following machines for testing yarns:
1. STM D 3108 Yarn Friction Tester GT-A32
It is suitable for measuring the static friction coefficient and kinetic friction coefficient of filament yarn with different solid materials. Computer automatically calcula
2. ASTM D2256 Single Yarn Strength Tester GT-A02A
Single Yarn Strength Tester determines breaking strength and elongation of single cotton, wool and other yarns up to 50 N. Yarn Strength Tester complies with yarn strength testing methods like ASTM D2256, ISO2062, GB/T14344, etc.
Single yarn strength tester works on the principle of constant rate of elongation with pneumatic base which is powered by micro controller; it’s a semi automatic user friendly instrument, its traverse speed and specimen length setting can be adjusted through data entry, quick lowering of upper jaw results fast testing.
3. Electronic Single Yarn Twist Tester Machine GT-A08
Yarn Twist Tester, to determine yarn twist in single or plied yarns, quadrant type with auto stop & reverse for conventional or untwist/re-twist methods. Twist tester is very important in textile testing. Our Yarn Twisting Machine price is also competitive.
Test standard
Twist Tester Machine complies with ISO 2061, ASTM D1422/1423, BS 2085,etc.
300N 1000mm/min Yarn Twist Test Machine For Textile Breaking Strength
GB/T 14344,ISO 2062,GB/T 3916,ASTM D2256,DIN,BS.
Professional tensile tester manufacturers also understand that when you're working with tensile tester manufacturers product, it's important to understand that quality of textile testing equipment always matters.
More about the most suitable , visit GESTER Instruments to get your offer!
We believe in keeping the customers happy and providing them with textile testing equipment at a very competent price.
GESTER International Co.,Limited incorporates average length of the workweek, average growth in number of small businesses, startup per capita, average of growth of business revenues, five-year business survival rate, industry variety, entrepreneurship index and how digital a state is.
The rising tensile tester manufacturers consciousness observed worldwide are expected to be key factors driving the demand for tensile tester manufacturers textile testing equipment.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.
2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.
C
Quick links