Wholesale hydraulic bursting strength tester, bursting strength machine

这里可以自定义设置

Application

Bursting Strength Testing Machine is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm.

Feature

1.This fabric bursting strength tester use hydraulic method, meet multinational standards and equipped with several changeable test clamp.
2.The simple interface touching screen controller is easy and simple to handle.
3.The burst testing equipment is with protection transparent cover and LED light inside which will be easy to observe the specimen.
4.The burst test equipment can induct the burst automatically which is much more sensitive and reliable.
5.The AC servo drive system with low noise and wide range of applications.
6.4 Test Methods: Constant Rate Bursting, Constant Expansion, Constant Pressure and Constant Time Bursting.
7.The burst tester bring saving and printing functions and support on-line operation.

8.Provide on-line interfaces, professional detection software which can be used to analysis testing result.

Product Parameters

Standards
ISO 13938.1,FZ/T 60019,FZ/T 01030,ASTM D3786,BS 4768,WOOLMARK TM 29 WSP 30.1,JIS L 1018.6.17
Key Specification
Model	GT-C12A-1	GT-C12A-2
Range	2.00Mpa	10.000Mpa
The min. Division value	0.001Mpa	0.003Mpa
Test area	7.3 cm2 (Φ30.5mm),10 cm2(Φ35.7mm), 50cm2(Φ79.8mm),100 cm2(Φ112.8mm) can be option
Thickness of rubber diaphragm	≤2mm
Pressure speed	100ml/min- 500ml/min
Accuracy	±1 mm, when the height at burst up to 70 mm
Testing units	Kpa,kgf/ cm2,atm,mmHg,lb/in2free shift
Test method	Constant Rate Bursting, Constant Expansion, Constant Pressure, Constant Time Bursting
Output	Printer ,display output,and can be connected to the computer
Power supply	AC 220V 50/60HZ 500W
Dimensions	550×450×700mm
Net weight	125kg
Accessories
Standard accessories	1 set	Test set of 7.3cm²(φ30.5mm)
	1 set	Test set of 50cm²(φ79.8mm)
	1pc	Wrench
	1pc	Stainless steel calibration plate
	1pc	Rubber diaphragm
	1pc	English operation software
	1pc	Cable connect with PC
Optional accessories	Optional	Other test set
	Optional	Rubber diaphragm
	Optional	Air compressor

这里可以自定义设置

Product Details

Sample Cover

Inner dia. :50cm2, made of PMMA, LED lamp inside, Magnets in installation, convenient to be changed.

Printer

Print out the test result.

Sample Fixtures

PMMA Cover,avoid to be hurt.make it’s safety. Upper press plate inner dia.: 10cm2 Lower device test area: 7.3cm2

Fabric Hydraulic Bursting Strength Tester GT-C12A