latest abrasion and pilling tester for business for fabric

Latest products

AATCC TM16 Suntest & Xenon Arc Tester GT-D01

Digital Lastometer Leather Cracking Tester GT-KC37A

Permeability Tester for Diapers

Computer Controlled Mooney Viscometer GT-KR03

Product Information
Feedback

is carefully engineered at a materials level. Factors such as reflectivity, diffusion, texture, and elasticity are taken into serious consideration.
The product is characterized by its corrosion resistance. It has been treated with chemical or acid-base liquid to enhance its chemical properties.
By removing the particles and stains out, the product works well in supplying pool owners with a clean, hygienic, and clear swimming condition.

Product Advantage

To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.

Key Specification

Model		GT-C13B-4	GT-C13B-6		GT-C13B-8			GT-C13B-9
Working Positions		4	6		8			9
Control Mode		PLC control and touch screen display
Counter Range		0~999999 times
Test Pressure	Abrasion Test	A）Specimen holder: (198 ±2)g B) Larger loading piece: (597±5)g C) The sum mass:（795± 7)g , for workwear , upholstery, bed linen and fabrics for technical use ( nominal pressure of 12kpa)
		A）Specimen holder: (198 ±2)g B) Smaller loading piece:(397±5)g C) The sum mass: (595± 7)g , for apparel and household textiles , excluding upholstery and bed linen (nominal pressure of 9kpa)
	Pilling Test	A）Stainless steel loading piece: (155 ± 1) g B) Specimen holder: (260 ± 1)g C) The sum mass:（415± 2)g
Holder Effective Diameter		A) Abrasion Holder : Φ(28.65 ± 0.05)mm
		B) Pilling Holder : Φ(90 ± 0.10)mm
Rotational Speed		50± 2r/min
Pressing Weight		Mass : (2.5 ± 0.5) kg
		Diameter: Φ(120 ± 10) mm
Power Supply		AC220V 50/60Hz
Dimensions(L x W x H)		60×55×41cm		88×61×41cm		90×62×41cm	90×62×41cm
Weight		75kg		130kg		145kg	150kg

t******q

GESTER Instruments abrasion and pilling tester is consist of several major parts. It is designed with an actuating device, speed variator, gearing, working device, brake device, lubrication system, and cooling system. PMMA material makes plastic products clear and transparent

v******m

GESTER Instruments abrasion and pilling tester consists of major mechanical parts. It is built with a level, axle, motor, engine, inclined plane, and hydraulic system. Our products are well packaged and protected during transportation

t******w

Different machining approaches are used in processing mechanical parts of GESTER Instruments abrasion and pilling tester. These mechanical parts, including engine, motor, and hydraulic components, will go through thermal treatment, honing machining, or wire cutting based on their actual usages and structures. With its own superb technology and efficient service, Tuowei hand model is well accepted at home and abroad

i******e

GESTER Instruments abrasion and pilling tester has to be tested before being assembled into the final product. Its every part such as hydraulic system, engine, and other moving parts will be scrutinized and debugged by mechanical engineering technicians. PMMA material makes plastic products clear and transparent

p******o

GESTER Instruments abrasion and pilling tester has been tested in terms of the following aspects. They cover parts and components safety, the whole machine safety, operation safety, and environmental safety. The surface of our prototypes is smooth and flat

p******q

The product is thoroughly checked in order to ensure that it performs without any flaws. Our products are well packaged and protected during transportation

Product Message

*Name

Phone

*E-mail

*Content

GESTER Instruments abrasion and pilling tester for business for fabric