Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
What are the characteristics of the different types of xenon lamp aging testers?
There are many brands and types of xenon lamp aging testers. At present, domestic and imported products coexist in the market. According to their heat dissipation methods, there can be different classification standards. Because xenon lamp aging testers generate a lot of heat during operation, the heat dissipation problems of xenon lamps are There is a problem that must be considered. The current xenon lamp aging tester can be divided into water-cooled, air-cooled and desktop xenon lamp aging testers according to the test standards. The differences between them are explained below. 1. Due to the large difference in power between the xenon lamp aging tester and the water-cooled xenon lamp, the air-cooled test box uses three air-cooled lamps instead of one water-cooled lamp, and can save the water tower device and simplify the equipment structure. Three lamps are placed horizontally on the top of the inner tank and irradiate vertically on the surface of the sample below. There is no special restriction on the state of the sample material. The radiation intensity: ≤300W/㎡, which is more suitable for 'indoor products'. . 2. Xenon lamp aging test machine refers to the use of water-cooled xenon lamp tube as the light source. The box structure is a standard vertical type. Because the water cooling cycle of the tube is involved, a circulating water tower device is installed on the top of the box. Inside the test box, a water-cooled lamp tube is placed vertically. The lamp tube is surrounded by clips. The clamp and the bottom turntable are integrated to form the test sample rack, which is a cylindrical structure as a whole. Before the test, clamp the sample material on the sample holder and let the light radiated by the lamp irradiate the surface of the sample. At the beginning of the test, the turntable began to rotate and the radiation source was aged. Radiation intensity: ≤1200W/㎡, which is more suitable for the test of 'outdoor products'. Third, the desktop xenon lamp weather test chamber is also called desktop, portable, and simple. It is a device that can be placed on the table for aging test. It can be said to be an air-cooled mini version. The desktop adopts an air-cooled lamp tube or a water-cooled lamp tube on the top of the inner tank to irradiate the product and cause light aging. Because of its simple structure and convenient use, it is widely used in many scientific research institutions and colleges and universities. Standard Group (Hong Kong) Co., Ltd. has a long-term supply of various imported xenon lamp aging experimental equipment and other experimental equipment. The air-cooled and water-cooled heat dissipation methods of the xenon lamp aging test machine have their own advantages. The water-cooled type must be carried out with sufficient water source. The water-cooled heat dissipation effect is actually better and more obvious; the air-cooled xenon lamp aging test Because the machine is not restricted by site conditions, the heat dissipation effect is not as obvious as water cooling, but it is convenient; no matter which method of calculating heat can be performed normally, the experiment is feasible.
GESTER International Co.,Limited is always trying to better understand the textile testing equipment of innovation, so we can help companies lead the industries.
You will find a wide variety of for sale for virtually any tensile tester manufacturers needs. Keep in mind how you plan to use the , and talk with a professional about the model and features that are right for your application. Go to GESTER Instruments for on sale.
GESTER International Co.,Limited's textile testing equipment are sturdy, easy to operate, friendly work machines that deliver high-quality tensile tester manufacturers for tensile tester manufacturers purposes.
The tensile tester manufacturers textile testing equipment has significantly numerous benefits over other tensile tester manufacturers systems, which makes it first choice for tensile tester manufacturers.
As the full potential of tensile tester manufacturers lies in , the demand for is increasing globally, and is being adopted across the global market.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links