a. After completion, check the test result on the Report page.
b. Click PRINT to print the test result.
With the continuous evolution of the feather and down product market, we are thrilled to introduce a product – the Automatic Feather & Down Filling Power Testing Equipment GT-C43B. This equipment is not only widely used for determining the filling power of feather and down products but is also an invaluable tool for professionals to control product quality and enhance competitiveness.
In this article, we will delve into the operational procedures of Feather & Down Filling Power Testing Equipment, providing you with a comprehensive user manual. Whether you are a newcomer to the industry or an experienced professional, this operational guide will serve as your reliable companion when using Feather and Down Filling Power Test Machine. Let's explore this efficient and intelligent feather filling power testing equipment together, ensuring it becomes your product quality safeguard!
The Automatic Feather & Down Filling Power Testing Equipment GT-C43B is a testing solution designed for the feather and down product industry. The equipment's unique filter ventilation design, with automatic switching between blowing and sucking positions, prevents feather dispersion, ensuring operator health and a clean working environment. With adjustable test speeds and a servo motor system, it offers precision in bulkiness height measurements for diverse standards.
The original zero position system guarantees data accuracy, complemented by a high-precision sensor and ARM 32-bit microprocessor. The automated wind speed system maintains feathers in a natural, fluffy state, enhancing data authenticity. The one-click test process streamlines operations, eliminating manual test bucket replacement and timing measurements. The Feather and Down Filling Power Tester offers efficient and reliable feather and down product testing without unnecessary complexity.
1. Connection preparation
a. Connect the equipment to an air source with approximately 0.3MPA pressure.
b. Connect to the power supply (AC 220V 50HZ) and turn on the power.
2. Replace the Test Pressure Plate:
a. Press TEST to enter the test interface and click DOWN.
b. Once in the appropriate position, press STOP.
c. Rotate the screw anticlockwise to remove the original pressure plate.
d. Clockwise rotate the screw to install the test pressure plate.
Enter the test interface, click the Reset button, and the pressure plate/test cylinder will automatically return to the origin position.
Place the test cylinder (500mm) with down already installed (corresponding pressure plate is 94.25g).
a. Enter the Adjust page, input the height value (from the bottom of the test cylinder to the pressure plate) in Zero Adjust, and click Correct.
b. Return to the interface, enter the Set page, and input test parameters (Plate quality, Sample quality, Test Barrel diameter, etc.).
c. Return to the test interface and close the test door.
a. Click Start to commence the test.
b. The machine will start blowing the specimen.
c. After reaching the set blowing time, the machine will automatically stop blowing.
d. The machine will automatically lift the blowing plate and move the test cylinder under the pressure plate.
e. The test pressure plate will slowly descend. After reaching the test standard residence time, it will automatically lift.
f. The test cylinder will automatically return to the origin position. After completion, check the test result on the Report page.
a. After completion, check the test result on the Report page.
b. Click PRINT to print the test result.
In summary, the operational procedure of the Feather & Down Filling Power Testing Equipment GT-C43B is straightforward and user-friendly. By connecting to the air source, configuring test parameters, and conducting height calibration, users can effortlessly carry out precise testing of feather filling power. The intelligent design and automation features make the operation more convenient, ensuring a reliable control over product quality.
We encourage users to reach out to our technical support team at any time for questions or additional assistance during usage. Whether it's about equipment operation, test parameter settings, or any other technical inquiries, our dedicated team is ready to provide support and guidance, ensuring you maximize the functionality of the Feather and Down Filling Power Tester for optimal testing results. Thank you for choosing our product, and we look forward to partnering with you to elevate the standards of feather product quality!
Copyright © 2019 GESTER International Co.,Limited | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.