loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

At the beginning of the year, the air pollution protection tax was levied, and the VOC exhaust gas adsorption and recovery device achieved zero pollution

On the afternoon of the 29th, the 33rd meeting of the Standing Committee of the 12th Provincial People's Congress reviewed the 'Decision on the Applicable Tax Amount of Environmental Protection Tax on Air Pollutants and Water Pollutants in Hunan Province (Draft)'. According to the spirit of the draft decision, our province plans to levy environmental protection taxes on air pollutants and water pollutants from next year, and will no longer levy sewage charges. Among them, the applicable tax amount for taxable air pollutants is planned to be 2.4 yuan per pollution equivalent, and the applicable tax amount for taxable water pollutants is proposed to be 3 yuan per pollution equivalent. Shi Jianhui, director of the Provincial Department of Finance, introduced that the collection of environmental protection taxes on air pollutants and water pollutants is the specific implementation of the 'Environmental Protection Tax Law of the People's Republic of China' that will take effect on January 1 next year. The Environmental Protection Tax Law stipulates that the tax amount for air pollutants is 1.2 yuan to 12 yuan per pollution equivalent, and the tax amount for water pollutants is 1.4 yuan to 14 yuan per pollution equivalent, both of which are 10 times. Compared with the current pollution discharge fee collection standards of our province, the environmental protection tax standards for air pollutants and water pollutants proposed by our province are 100% higher for air pollutants and 114% higher for water pollutants. Compared with the specified maximum tax rate, it is still in its infancy, which not only takes into account the intensification of pollution control efforts, but also takes into account the burden borne by enterprises. It is understood that the task of improving environmental quality in our province is arduous and complex, and the air and water pollution is relatively serious. According to the calculations of experts organized by the Provincial Department of Finance, the Provincial Local Taxation Bureau and the Provincial Environmental Protection Department, the average treatment cost of air pollutants in our province is 1.76 yuan per pollution equivalent, and the average treatment cost of water pollutants is 2.85 yuan per pollution equivalent. It is obviously lower than the cost of pollution control by enterprises, which cannot motivate enterprises to actively control pollution. Therefore, in order to continuously improve the environmental quality of our province, it is necessary to appropriately raise the standard of environmental protection tax, and only if the environmental protection tax collected is higher than the cost of pollution control by enterprises, can enterprises be motivated to control pollution instead of directly discharging. At the same time, the Environmental Protection Tax Law stipulates that if the emission concentration value is lower than 30% of the prescribed standard, the tax will be reduced by 75%; if it is lower than 50%, the tax will be reduced by 50%. This regulation is more favorable than the original preferential policy of halving sewage charges. Most enterprises in key industries such as thermal power generation and cement in our province can complete emission reduction tasks and enjoy tax incentives, thus reducing the burden on enterprises. During the deliberation, the members of the Standing Committee of the Provincial People's Congress believed that the specific applicable tax amount for taxable air pollutants and water pollutants proposed by our province has taken into account the environmental carrying capacity of our province, the status quo of pollutant discharge and the requirements of economic, social and ecological development goals. It will help strengthen the binding force of taxation on pollutant discharge, and promote enterprises to establish and improve the pollutant discharge control mechanism. It is of great significance to protect and improve the environment, reduce pollutant discharge, and build a rich, beautiful and happy new Hunan. Related Links Environmental Protection Tax Taxpayers——Enterprises, institutions and other producers and operators that directly discharge taxable pollutants into the environment are taxpayers of environmental protection tax (enterprises, institutions and other producers and operators discharge taxable pollutants to the centralized sewage treatment and domestic garbage disposal sites established according to law. If the solid waste is stored or disposed of in a facility or place that meets the national and local environmental protection standards, it is not considered as a direct discharge of pollutants to the environment, and no environmental protection tax for the corresponding pollutants will be paid).​​——The legally established sites for the centralized treatment of urban and rural sewage and the centralized treatment of domestic wastes that discharge taxable pollutants into the environment in excess of the national and local discharge standards shall pay environmental protection tax.​​——Enterprises, institutions and other producers and operators that store or dispose of solid waste that do not meet the national and local environmental protection standards shall pay environmental protection tax. The VOC solvent recovery device turns the VOC into a liquid for separation and recycling. Environmental protection and saving, greatly reducing the pollution of exhaust gas to the atmosphere. Undertake the design, processing and manufacturing business of VOC waste gas adsorption and recovery device.

GET IN TOUCH WITH Us
recommended articles
GESTER's Success at Shoes & Leather - Vietnam 2025
GESTER successfully participated in Shoes & Leather Vietnam 2025 (July 9-11), showcasing cutting-edge footwear testing machines. Visitors explored equipment like the Bally Resistance Flexing Tester and Martindale Abrasion Tester, with many expressing strong collaboration interest. Learn more about GESTER’s innovative solutions for the footwear industry.
What Are the Test Methods for Fabric Bursting Strength?
Fabric bursting strength measures resistance to rupture under concentrated load. Three primary test methods are used:

Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.

Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.

Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
What are The Flame Retardant Test Methods ?
Flame retardant testing evaluates materials' ability to resist ignition and slow fire spread. This guide covers key textile test methods (45°, horizontal, vertical), standards (ASTM, ISO, BS), and equipment like flammability testers for upholstery, carpets, and fabrics.
Why TDM Cut Test Machine GT-KC28 Is Needed in PPE Testing

Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.

By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.

The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
What is the Use of Air Permeability Tester?
An air permeability tester measures how easily air passes through textiles, nonwovens, and other materials, directly impacting comfort (heat/moisture management) and performance (wind resistance, filtration). This guide explains how digital testers work using pressurized airflow, details step-by-step testing procedures (including nozzle selection), and covers key applications in apparel, medical, automotive, and industrial sectors. Explore compliant standards (ISO 9237, ASTM D737, GB/T 5453) and
How to Know the Fabric Shrinkage Test for Your Projects
Master fabric shrinkage testing with this definitive guide. Understand causes of shrinkage, industry standards (ISO, GB, AATCC), step-by-step testing methods using Wascator equipment, and strategies to minimize shrinkage for superior garment quality and customer satisfaction.
Technical Insight: How a Professional EN388 Gloves Tester Company Evaluates Durability
In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.
Understanding 3 Positions DIN Abrasion Tester : A Comprehensive Guide
This comprehensive guide explains the 3-Position DIN Abrasion Tester, a rotary drum instrument simulating real-world wear to quantify material abrasion resistance. Learn its working principle (mass/volume loss measurement under controlled friction), key features (touch-screen control, automated dust cleaning), and applications across rubber, tires, footwear, and conveyor belts. Discover compliant standards (DIN 53516, ISO 4649, ASTM D5963), step-by-step operation procedures, and essential mainte
Bally Leather Flexing Tester GT-KC10A Assembly Guide
This comprehensive guide provides detailed instructions for the proper assembly, calibration, and operation of the Bally Leather Flexing Tester GT-KC10A. Essential for quality control labs, it ensures accurate testing of flex resistance in leather, coated fabrics, and textiles used in footwear uppers, helping to prevent material failure.
ISO 17694 / ISO 5402-1: Footwear Flexing Resistance Test Methods
Footwear soles and uppers endure thousands of flex cycles during use, risking premature cracking, delamination, or chipping if material resistance is inadequate. This technical analysis details two critical international standards:

1. ISO 5402-1: Specifies the flexometer method for testing leather flex resistance under repeated bending.

2. ISO 17694: Defines test methods for footwear upper and lining flex resistance, simulating real-world bending stress to assess long-term durability.

C
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect