Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Universal tensile testing machine when the most suitable for an oil change
Universal tensile testing machine: what time do you oil change is most suitable for universal tensile testing machine oil change notice: 1, bit by bit, pay attention to is still the position of oil source behind farmar with internal things. 2, if it is the type of so simple. 3, put oil: pipe of what all don't move; 4, behind a discharge of oil tank, raise your tensile testing machine control cabinet; 5, open the discharge of oil, oil discharge; Raise the control cabinet of time attention computer line such as; 6, if not convenient, need to dismantle the pipe, such as line, must mark hurt before; 7, to avoid incorrect connection to happen; 8, the oil cylinder is placed on testing machine type or oil cylinder underneath type; 9, equipment with microcomputer control ( Such as: microcomputer control electronic universal testing machine ( Floor) ; 10, or a digital display screen ( Such as: we - B series digital display type hydraulic universal testing machine) Reading; 11, the digital display is similar to the oil source of general computer; 12, if universal tensile testing machine control system is to read disk ( Is the numerical degree through a dial call dial) So oil change trouble points; 13, oil source can't move; 14, a drain on the side of oil source, find a bit shorter container. How to encourage universal tensile testing machine: 1, the control cabinet to lay down their original position, dismantle the pipe; 2, the pipe connected to add oil, fuel tank with a filler; 3, because there is a filter, so come on speed will slowly, 4, if give universal tensile testing machine oil is very clean, you can choose without filter.
textile testing equipment is not something to be ignored or taken for granted. It is there to keep your tensile tester manufacturers comfortable year round. To find a cost effective solution, turn to GESTER International Co.,Limited.
GESTER International Co.,Limited seeks to lead the industry by instilling pride in our customers, creating value for the market and sharing responsibility around the world.
tensile tester manufacturers textile testing equipment is characterized by various advantages, such as tensile tester manufacturers, tensile tester manufacturers and tensile tester manufacturers, which is not the case with other textile testing equipment.
GESTER International Co.,Limited must adopts new technology and internal procedures to increase responsiveness and mitigate costs going forward.
As a top provider of products, GESTER International Co.,Limited will surely meet your urgent need for textile testing equipment solutions. Go to GESTER.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links