Constant temperature and humidity
test chamber for accurate simulation of high and low temperature and high temperature and high humidity, low temperature and humidity and other complex natural environment and widely in medical services, electronics, semiconductor, pharmaceutical, chemical plants, protect skin to taste, architectural coatings, biological medicine, agricultural science and technology innovation, as applied to the researches, such as ecological environment protection.
In order to keep the machinery and equipment and stable characteristics and life, we should do well the maintenance work, so to maintain constant temperature and humidity
test chamber to do?
Where do maintenance must first clear maintenance, for external, major maintenance project of outer casing and the transformer room maintenance;
As for the internal, major maintenance: humidifier, compressor, condenser, wet ball cloth.
Constant temperature and humidity test chamber machine external maintenance is mainly in the aspect of cleaning.
Constant temperature and humidity test chamber of the outer packing is mainly have two materials stainless steel plate and painted.
Metal cleaning: stainless steel plate surface circumcision is suffering from environmental pollution, resulting in the surface of steel passivity plastic film damage, also can appear growth is likely to rust.
This kind of material is very easy to catch fingerprint identification, and difficult to wipe down.
Cleaning spray on the machinery and equipment under the condition of the anti-corrosive paint, then scrub with a towel.
The frequency of the clear according to the actual situation to adjust.
The removal of the method for this type of work, not only has the effect of cleaning, will also be of stainless steel plate surface has the rust prevention function.
Anti-corrosion paint can produce anti-rust film in damaged positions, to avoid further air oxidation of raw materials.
Paint material: this kind of not sticky dust, the clean is convenient, if the swab with a slightly damp cloth.
General transformer room cabinet is all is closed for a long time, the proposal the frequency of cleaning up once a year.
The dust of the route of components between to eliminate.
Humidifier and incrustation often clean to prevent caused by dirt, the release of steam, generally made an experiment to clear a, dirt get cleared immediately beneficial humidifying tube service life and guarantee the smooth water during cleaning application of copper soft bristle brush to wash water clean.
Heat removal of refrigeration unit (
Condenser)
Should be timely maintenance, keep clean.
Dust sticky on the condenser can make the compressor to get rid of the false alarm caused by high voltage circuit breaker, the condenser should be on time every month to maintain, condenser heat removal using wireless cleaner wire online adhesion of dust gettering or boot after application of qualitative hard hair brush or by high compressed air blowing mouth clean and dust.
The wet dishcloth of wet area the ball often inspection, when detecting cloth surface is not clean, or stiff, or in high temperature above 85 ℃ after manipulation, temperature humidity control before again.
Via checking if there is no moisture absorption please conversion, associated with the accuracy of the moisture, detecting cloth generally moved around march, when changing a clean towel scrub body temperature measurement, changing a new detecting cloth should be first hand washing again when the stainless steel sink clean and tidy.
Compressor is a constant temperature and humidity test chamber is more critical of one component, for its maintenance is mainly on the furring wash.
Twenty minutes to let the compressor running, make the oil temperature inside the room temperature.
Then stop running, such as compressor cavity pressure after the purging, open to cover oil, pour into the compressor oil removal agent, again running 40 minutes, finally the export to the old oil and new oil.
Maintenance frequency depends on the application of frequency, if used often, proposed maintenance once a year.
The interpretation of the above is the basic maintenance methods of constant temperature and humidity test chamber, the hope can help you, if you want to learn more about information of constant temperature and humidity test chamber, welcome to the online consulting service or call the company service hotline (
Website top right corner)
For consultation, we will wholeheartedly provide high quality service for you!
Tags: & nbsp constant temperature and humidity test chamber
GESTER International Co.,Limited is devoted to satisfy our customers with a wide array of the finest using experience.
Crazy about products? GESTER International Co.,Limited is the place you must shop at, do visit GESTER to check out our latest collections!
GESTER International Co.,Limited provides professional , technology and human expertise clients need to find trusted answers. Go to GESTER for answers.
GESTER International Co.,Limited are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.
