Gester Instruments | Professional Textile, Footwear and PPE Testing Equipments Manufacturers Since 1997
Recycling technology of organic waste gas with low VOCs concentration
In the current era when environmental protection is increasing and people are paying more attention, VOCs waste gas has begun to receive more and more attention from everyone. Therefore, VOCS recycling has received more and more attention from companies. In view of the current high concentration of VOCs waste gas treatment methods , There are different treatment methods on the market, and the advantages of recycling treatment technology with large emissions and low VOC concentration. 1. High-concentration VOC recovery technology in the gas. During the loading process of light oil products and the large and small breathing operations in the tank area, high-concentration oil and gas are discharged. The concentration of VOC can reach more than 1000g/m3. The hydrocarbon concentration is in the hundreds of grams per cubic meter. The emission limit requires that the concentration of non-methane total hydrocarbons is ≤20g/m3 and 25g/m3, and the mechanical refrigeration low-temperature condensation → filtration and capture treatment method is adopted. The first-level heat exchange adopts cold energy recycling technology; the two-stage mechanical refrigeration method is used to establish a low temperature environment not higher than -95℃ to condense and recover the hydrocarbons in the oil and gas; the filter trap technology is used to perform the condensation and recovery of the gas Filtering and trapping treatment improves the recovery rate of oil and gas. 2. Low-concentration VOC recovery technology in the gas. The VOC concentration is low, but the total amount of VOC emissions from various process waste gases with large gas emissions is considerable. For example, the VOC emission concentration is 300mg/m3, the gas emission is 40000m3/h, the VOC emission per hour is about 12kg, and the annual production device running time is 8000 hours, and the VOC emission is about 96t. This is the two production emissions of latex gloves. The actual situation of D60 and D70 solvent oil does not include almost the same amount of DOP mist emission. The VOC emission concentration limit is 120mg/m3 in national standards and petrochemical industry standards, and local standards in different places are 100mg/m3 and 80mg/m3. Exhaust gas with low VOC concentration but large gas emissions has two situations. One is that the emission concentration exceeds the standard and the other is that the emission concentration meets the standard. Excessive exhaust gas should be treated, and for the exhaust gas that meets the standard, due to VOC The emissions are large and have recycling value, which can significantly reduce production costs. Adopting dual adsorbers to alternately adsorb and desorb, adsorb and concentrate VOCs, and discharge gas up to standard. For characteristic pollutants with low emission limit requirements, the discharged gas can be processed by oxidation. Vacuum desorption is adopted, and the desorbed rich gas is condensed and recovered at low temperature, and the unrecovered VOC is sent to the adsorber for adsorption treatment.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.
By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.
The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
Quick links