Button pull tester operation method and maintenance details

Significance and function: 1. The test method of this instrument is used to measure the strength of the vertical pull test on buttons and clothing, and the buttons and buttons are not pulled off the clothing; 2. The button sewing specifications required by this method should be in accordance with the button manufacturer. 3. This test method is used to correlate different wearing environments and to compare different button types and brands; 4. This standard may contain hazardous materials, operations and equipment that are not listed in the standard All safety issues that may arise in use. Therefore, it is the responsibility of the user of the standard to establish relevant safety and health rules, and to determine the appropriate regulations before use; 5. All buttons need to be sewn tightly to the fabric with chain clothing; 6. According to the test requirements, when the maximum If the size of the button is greater than 6mm or less than or equal to 6mm, the button must be able to withstand the tension of 90N and 50N respectively. The advantages of the instrument: l The position of the test table can be raised and fixed upward through the handle, which is convenient for changing the sample; l The horizontal first-wheel operation is designed with ergonomic principles to make the operator more comfortable; l The safety design of the lock makes the operation more convenient. Safe and reliable; l Cooperate with the special frame, so that the extended test range is wider; l Lower clamping pliers, accessories, stable clamping, easy to use; l The spring design of the hidden center greatly improves the pinning force and ensures the repeatability of the test; l Upper clamping pliers, equipped with a variety of clamps, suitable for different button samples; l It is the most convenient design and can reduce the damage of the sample due to slippage during the test process. The operation of the button tester: 1. Install the fixture, cooperate with the button to be tested, and lock the test sample to the base 2. Put down the fixture, grasp the button and pull it upward, each set of buttons must bear at least 17 pounds of pulling force (ie 7.72 kg) and need to hold for 10 seconds without any signs of loosening or breakage, and 20 buttons of each type must be tested at the same time to be considered qualified. 3. If one of the buttons is loose or damaged, or after replacement, all of them must be re-inspected. Routine maintenance and maintenance: l Do not use overloading, the rated load of this instrument is 300N; l Pay attention to daily maintenance work and keep all parts of the instrument clean; l When the instrument is sluggish and inflexible during use, please contact the bearings on both sides of the machine. Add a little oil to the oil hole on the seat to lubricate. Please contact our company in time when the machine fails. More about Button Pull Tester: http://www.standard-groups.com/OfficeFurniture/
Wow, this sounds like a bit of a cruel question, but it is a vitally important question to ask yourself if you are struggling with your tensile tester manufacturers and you would like to stop the textile testing equipment problem.
GESTER International Co.,Limited will become the destination store for customers, offering the convenience of multiple brands and channels, and providing a personal high touch shopping experience that helps create lifelong customer relationships.
Our company specializes in selling textile testing equipment as well as providing relevant services.
Using high technology, textile testing equipment showed its competitive advantages, captioned with information about the company's commitment to providing safe, reliable, profitable jobs to local artisans.
GESTER International Co.,Limited knows how important it is to offer optional extras, such as textile testing equipmenttensile tester manufacturers to provide quality products for customers.