Gester Instruments | Professional Textile Testing Equipment Manufacturers Since 1997
Drop tester using the guidelines
In front of the drop tester for packaging, Angle and edge for random drop test, configuration of digital display height to width ratio display instrument and the aspect ratio with servo motor to track, which can accurately obtain goods falling height to width ratio, falling with preset ratio deviation less than 2%, or 10 mm. So we in the process of application drop tester to test what items need to be aware of? Below to let us to know: 1, the judgment of packaging interface: packaging drop test will be looking for packaging interface cannot little, in fact every packaging is easy to distinguish. The following figure is a typical paper bag packing, we can see the top right corner has a juncture place, in the packaging only this one of the four corners of Angle seam, this is what we call package interface. 2, packing damage can accept level: for the bottle through the packaging of hole diameter less than 20 mm, less than 50 mm gap or ruffled crushed pits of less than 25 mm can be accepted, but for more than the category of packaging damage will not be accepted, packing design improvement are needed to ensure fall features, new packaging packaging drop test must be reintroduced to the effect of design changes. 3, packaging placed time: according to print packaging products are not accepted for drop test again after long-term storage, it is highly recommended in packaging products manufacturing within five working days after the test, because the print packaging products after implantation can absorb the moisture in the body in the air and harm the packing of specific features. Drop tester use single column to and play yellow cache, height to width ratio scale, stable work, can complete ridge, noodles, Angle of fall. In the process of moving or transporting goods, there will be a crash caused by internal goods damage, prior to prevent harm, the machine will be used to forecast test, and then get the best solution, facilitate can avoid damage in transit. Is drop tester using the interpretation of the above notice, the hope can help you, if you want to learn more about information about drop test machine, welcome to the online consulting service or call the company service hotline ( Website top right corner) For consultation, we will wholeheartedly provide high quality service for you! Tags: & nbsp drop tester
With technology speeding up in lighting speed, have created quite a name for itself amidst tensile tester manufacturers and it happens to have a lot of benefits as well.
Now you can enjoy tensile tester manufacturers with GESTER International Co.,Limited's latest collection of tensile tester manufacturers textile testing equipment products. Do visit now, at GESTER.
Knowing what promotions are popular and get the most activity as textile testing equipment from current and potential customers can play a role in your overall strategy.
The Heat Contact Machine GT-C101 is a specialized testing instrument designed for evaluating the heat resistance and thermal protective performance of gloves, protective clothing, and other heat-resistant materials used in high-temperature environments. In industries such as smelting, casting, welding, and glass manufacturing, workers are frequently exposed to intense heat, making accurate testing of contact heat resistance essential for ensuring safety and compliance.
GT-C101 simulates real working conditions by measuring heat transfer delay and thermal transmission under instant contact with high-temperature surfaces. Fully compliant with EN 407, EN 702, and ISO 12127-1 standards, this machine provides precise, repeatable data for manufacturers, laboratories, and research institutions. With high-temperature capability up to 500°C, advanced calorimetry, digital monitoring, and adjustable contact speed, the Heat Contact Machine GT-C101 is an indispensable tool for developing and certifying next-generation PPE and heat-insulation materials.
Ball Burst Method (ASTM D3787): Steel ball penetration for textiles/films using testers like GT-C02-2.
Hydraulic Method (ISO 13938.1): Fluid pressure on rubber diaphragm for industrial fabrics via GT-C12A.
Pneumatic Method (ISO 13938.2): Compressed air for breathable materials tested with GT-C12B.
Results are influenced by raw materials, yarn properties,
Quick links