loading

Gester Instruments | Professional Textile, Footwear and PPE  Testing  Equipments Manufacturers Since 1997


Products
Test Standard
Products
Test Standard

Technical Regulations and Standards on the Burning Performance of Textiles

Europe, America, Japan and other countries have long legislated the combustion performance of a series of textile products, including clothing fabrics, pajamas, children's pajamas, carpets, mattresses, curtains, etc., which require that they pass the combustion test before they can be produced and used; the United States The Consumer Product Safety Commission (CPSC) also legislates that all textiles used in high-rise buildings, aviation, shipping, hospital nursing homes, mass gathering places and flammable work areas must pass the flame resistance test. The following mainly introduces the corresponding technical regulations and standards of the United States, Canada, Japan, Europe and China. 1. The United States The United States passed the Flammable Fabric Act (FFA) as early as 1953, revised it in 1954 and 1967, and was enforced by the US Consumer Product Safety Commission (CPSC) (Table 2). Standards and regulations applicable to the scope of combustion performance technical requirements Remarks 16CFR1610 clothing textile flammability standard level 1: general flammability does not contain lint, soft hair, tufts and lint fabrics and other fabrics without raised fibers on the surface. The flame spread time is ≥3.5s. Can be used for clothing products. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is more than 7s or the surface burning is relatively rapid (within 0-7s), but the flame intensity cannot ignite or melt the substrate of the fabric. Grade 2: Moderately flammable fabrics containing lint, soft wool, tufts and lint, and other fabrics without raised fibers on the surface. The flame spread time is 4~7s (including the burning and melting time of the basal tissue). It can be used in clothing products, but should be used with caution, because the flammability test results of textile fabrics will vary with the characteristics of the fabric. Grade 3: Fast and violent burning of fabrics that do not contain lint, soft wool, tufts and lint, and other fabrics that do not have raised fibers on the surface. The flame spreading time is less than 4s. Such fabrics are considered to be flammable and dangerous, and cannot be used in clothing products because of their rapid and violent burning. Fabrics containing pile, soft hair, tufts and lint, and other fabrics without raised fibers on the surface. The flame spreading time is less than 4s, and the flame intensity is sufficient to burn or melt the base tissue. 16CFR1615 Children's Pajamas Flammability Standard No. 0-6 Children's Pajamas and related materials. The average carbonization length of the 5 samples is less than or equal to 17.8cm (7”). The carbonization length of any of the 5 samples is less than or equal to 25.4cm (10”), that is, none of the samples can be completely burned. There is only one sampling method-conventional sampling method: a batch of 500 dozen. 16CFR1616 Flammability Standard for Children's Pajamas No. 0-6 Children's Pajamas and Related Materials, No. 7-14 Children's Pajamas and Related Materials. Two sampling methods: ①Conventional sampling method; ②Relaxed sampling method: 15 consecutive batches of qualified samples can be implemented with a relaxed sampling method: 1,000 dozen as a batch. 16CFR1630 Carpet and felt surface flammability standard carpets. The distance from the edge of the carbonized area of u200bu200ba single sample to any point on the edge of the metal frame (d20.3cm) is ≥2.54cm, then the sample is qualified; at least 7 of the 8 samples are the distance from the edge of the carbonized area to the edge of the metal frame >2.54cm, the carpet test is qualified. 16CFR1631 Small carpets and carpets surface flammability standard Small carpets: size ≤183cm, area ≤223m2. 16CFR1632 mattresses and mattresses flammability standards for various household mattresses, excluding those installed on vehicles Kind of mattress. If the carbonization length measured at the closest point to the cigarette in any direction on the surface of the mattress is ≤5.1cm, then the single cigarette test is partially qualified; generally 18 cigarettes are required to be lit for the test, and all parts of the test are qualified to qualify the mattress. 2. The Canadian regulations on textile flame retardancy are included in the dangerous goods laws and regulations, and Health Canada is responsible for sending inspectors to enforce them (Table 3). The scope of application of standards and regulations, combustion performance, technical requirements, hazardous products regulations, any flammable, toxic and other products that pose a threat to public health and safety, textiles and clothing also belong to the flat fabric of textile fiber products. Flame expansion time>3.5s. The surface is raised fabric. Flame expansion time> 4s. Children's pajamas, pillows, cots, cribs or other textiles used for sleep with size ≤14. Flame expansion time>7s. Hazardous Products (Children’s Pajamas) Regulations The average carbonization length of 5 samples of children’s pajamas is ≤178mm; the carbonization length of a maximum of 1 sample is equal to the overall length of the sample (254mm). Children's pajamas treated with flame retardant should be attached with a permanent label indicating the flame retardant, the cleaning process and the guarantee that the flame retardancy of the product will not be reduced after use. The Hazardous Products (Carpets) Regulations require that carpets have flammability warnings on their labels. Dangerous Products (Tent) Regulations. The damage length of the textile material floor material of the tent is ≤25mm; the continuous burning time of a single sample of the wall and ceiling materials is ≤4s, the average continuous burning time of the sample is ≤2s; the damage length of a single sample is ≤255mm , The average damage length of the sample varies according to the square meter weight of the sample and has a different specified range. The flame spread time of plush toys made of textile fiber materials in the Hazardous Products (Toys) Regulations is> 7s. If one of the five samples fails, another five samples will be tested. If two of the ten samples fail Qualified, the product is unqualified. Dangerous Products (Mattress) Regulations The length of carbonization or charring in any direction around the mattress cigarette is ≤50mm, and after the cigarette is extinguished, the sample continues to burn for ≤10min.

GESTER International Co.,Limited is specialized in sourcing tensile tester manufacturers textile testing equipment through its unparalleled worldwide network of supply. Go to GESTER Instruments, you will surely find your ideal at the most favorable price.

No, this isn't a wonder product and it won't be likely to change your life but it will give your tensile tester manufacturers a kick and bring the extraordinary to the every day. give it a shot at GESTER Instruments.

GESTER clearly and succinctly expresses what our company is all about. Strong brands cut through the noise to grab the audience and immediately shed light on the character of the product or service.

With the help of a tensile tester manufacturers textile testing equipment, tensile tester manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.

GET IN TOUCH WITH Us
recommended articles
How to Improve Plastic Film Drop Dart Impact Strength
Discover actionable strategies to enhance the drop dart impact strength of plastic films for packaging, agriculture, and construction. Learn how material selection, additives, processing, and rigorous ASTM/ISO drop dart impact testing ensure product durability and prevent failure.
How to Test Firefighter Turnout Gear Thermal Protection?
Firefighter turnout gear plays a critical role in protecting firefighters operating in extreme environments involving high temperatures, flames, radiant heat, and convective heat. Its thermal protective performance directly affects firefighter safety and survival during fireground operations. This article explains how to test firefighter turnout gear thermal protection through Thermal Protective Performance (TPP) testing. It introduces the scientific principle based on the Stoll curve, outlines key influencing factors such as heat flux intensity and exposure time, and reviews internationally recognized standards including NFPA 1971 and ISO 17492. The article also highlights the testing advantages of the GT-RC02 TPP Thermal Protection Tester, which provides accurate, stable, and standards-compliant evaluation of flame-retardant protective clothing materials under combined radiant and convective heat exposure.
Why GESTER is Recognized as a Global Top Safety Shoe Tester Exporter
As global industrial safety requirements tighten, GESTER International Co., Ltd has emerged as a globally recognized top safety shoe tester exporter, serving 168 countries with over 25 years of specialized expertise. The company’s success hinges on its commitment to precision engineering, compliance with international standards (ISO, ASTM, EN, SATRA), and partnerships with renowned testing institutes like SGS, Intertek, and TUV. Its product lineup, including the Safety Glove & Shoe Upper Cutting Tester GT-KC29 and cut resistance testers, delivers reliable, repeatable data for safety footwear durability, cut resistance, and other critical performance indicators. Complemented by a comprehensive global service network (on-site installation, calibration, staff training) and OEM/ODM customization capabilities, GESTER streamlines quality control for manufacturers, facilitating market access and ensuring workplace safety. Trusted by PPE brands and laboratories worldwide, GESTER bridges technical excellence and practical usability to drive efficiency in safety shoe certification and global trade.
Leather Physical Properties Testing Guide
This guide details the 9 critical physical property tests essential for assessing leather quality: Tensile Strength, Tear Strength, Abrasion Resistance, Thickness, Water Vapor Permeability, Water Resistance, Shrinkage Temperature, Color Fastness to Friction, and Bending Strength. It covers the testing scope (natural leather, synthetic leather, finished products, semi-finished goods) and introduces specialized testing equipment required for each method (e.g., Universal Testing Machine, Elmendorf
Leather Industry Innovations: GESTER at ACLE as a Footwear Testing Equipment Factory
The global leather and footwear industry is shifting toward prioritizing durability, material integrity, and functional excellence—driving demand for high-precision testing equipment. As a highlight of ACLE 2026 (All China Leather Exhibition), GESTER International Co., Ltd., a 25+ year footwear testing equipment factory, showcases innovative solutions tailored to this trend. Trusted by leading testing institutes like SGS, TUV, and Intertek, GESTER’s product lineup includes the Martindale Abrasion Tester (for surface durability), Tension Testing Machine (for mechanical properties), and Safety Shoe Cutting Tester—all compliant with ISO, ASTM, and EN standards. These instruments integrate automation (PLC systems) and data traceability to reduce human error, support ISO 9001 compliance, and streamline laboratory efficiency. With a global service network spanning 160+ countries, GESTER offers on-site installation, calibration, and software updates to ensure long-term usability. The article also outlines strategic procurement tips for manufacturers, emphasizing modular design, standard compatibility, and supplier track records. For leather and footwear brands seeking to enhance product reliability, avoid recalls, and stay competitive, GESTER’s ACLE 2026 innovations and end-to-end support provide a definitive quality assurance solution.
Technical Insight: How a Professional EN388 Gloves Tester Company Evaluates Durability
In industrial settings, protective gloves’ durability is critical for workplace safety, with the EN388 standard serving as the global benchmark for evaluating abrasion, cut, tear, and puncture resistance. GESTER International Co., Ltd., a professional EN388 gloves tester company with over 20 years of experience, delivers high-precision testing solutions to ensure accurate and reliable durability assessments. Equipped with advanced instruments like the Safety Glove & Shoe Upper Cutting Tester GT-KC29—featuring LCD display, real-time monitoring, and compliance with EN, ISO, and ASTM standards—GESTER’s solutions meet the rigorous demands of laboratories, manufacturers, and international testing institutes such as SGS, TUV, and Intertek. Adhering to ISO 9001 quality management systems and offering comprehensive after-sales support (installation, training, calibration), GESTER empowers clients to validate PPE performance, mitigate workplace risks, and achieve global regulatory compliance. For trusted EN388 gloves durability testing equipment and integrated laboratory solutions, GESTER is the preferred partner in the PPE industry.
GESTER's Success at Shoes & Leather - Vietnam 2025
GESTER successfully participated in Shoes & Leather Vietnam 2025 (July 9-11), showcasing cutting-edge footwear testing machines. Visitors explored equipment like the Bally Resistance Flexing Tester and Martindale Abrasion Tester, with many expressing strong collaboration interest. Learn more about GESTER’s innovative solutions for the footwear industry.
Why GESTER Ranks as a Leading TPP Thermal Protective Performance Tester Exporter
As a trusted leading TPP Thermal Protective Performance Tester exporter, GESTER International Co., Ltd. brings 25+ years of R&D and manufacturing expertise to PPE safety testing. Our flagship GT-RC02 series TPP testers feature advanced dual-source thermal simulation, high-sensitivity sensors, and full digital automation—delivering precise, repeatable data to evaluate thermal protection for firefighter and industrial protective clothing. Fully compliant with global standards (NFPA 1971, EN 469, ISO), GESTER’s equipment is trusted by SGS, Intertek, and top testing institutes worldwide. Backed by ISO 9001 certification, global service in 160+ countries, and professional calibration support, we empower manufacturers and labs to meet stringent safety regulations and ensure life-saving thermal protection. Discover tailored TPP testing solutions for PPE excellence at GESTER.
Why TDM Cut Test Machine GT-KC28 Is Needed in PPE Testing

Cut resistance is one of the most critical performance indicators in personal protective equipment (PPE) testing, directly affecting worker safety in high-risk industries such as metal processing, machinery manufacturing, and emergency rescue. The TDM Cut Test Machine GT-KC28 plays a vital role in accurately evaluating the cut resistance of PPE products, including gloves, protective clothing, footwear materials, composite materials, rubber, and industrial textiles.

By adopting high-precision force control systems, intelligent data processing, and stable transmission technology, the GT-KC28 TDM Cut Tester can accurately measure the critical cutting force of materials and ensure excellent repeatability and comparability of test results. Its user-friendly touch-screen operation, comprehensive data storage, USB data export, and built-in thermal printer greatly improve laboratory efficiency and data traceability.

The TDM Cut Test Machine GT-KC28 fully complies with major international and national standards such as ISO 13997, EN 388, ASTM F2992/F2992M, ANSI/ISEA 105, and GB 24541-2022, making it a reliable solution for PPE manufacturers, third-party testing laboratories, and research institutions. Through precise and standardized cut resistance testing, the GT-KC28 helps reduce industrial cutting injuries, supports PPE certification across global markets, and ensures that protective equipment delivers reliable safety performance in real-world applications.
What is the Safety Glove & Shoe Upper Cutting Tester GT-KC29
The Safety Glove & Shoe Upper Cutting Tester GT-KC29 is a high-precision testing instrument developed to measure the cut resistance performance of safety gloves and footwear uppers. In industrial and construction environments where sharp tools and metal edges pose significant injury risks, the GT-KC29 provides a reliable evaluation method by simulating real cutting motion. This tester meets EN 388 section 6.2, ISO 20344:2021 section 5.23, GB/T 20991 section 6.14, and other global standards, making it essential for PPE manufacturers, testing laboratories, and quality control departments. With automated operation, high repeatability, and multi-standard compliance, it helps companies improve product safety levels, enhance global competitiveness, and ensure superior protection for end users.
no data
QUANZHOU GESTER INTERNATIONAL CO.,LTD gains certificates of ISO 9001, 3A and SGS Audited supplier etc. with advanced design concept, excellent manufacturing technology and strict quality control.
WeChat

Contact us
Tel: +86-595-28886108 
Fax: +86-595-22515221
E-mail: sales10@gester-instruments.com,
                 info@gester-instruments.com
Mobile/Whatapp/ Wechat:  
             + 86 018059983973
Address:  Block 402,4th floor, f buliding, shengfulan business Center, no.577 jitai road, economic and  Technological development zone quanzhou of fujian.China.
Customer service
detect