22 years focused on physical lab testing machines and provide total testing solution according customer requirement.

ShIP to

Tensile testing machine's operation and maintenance instructions

by:GESTER Instruments     2020-10-20
Tensile testing machine must be based on the condition of the specimen selected suitable jig, if already in the test jig on his mobile phone to download ok, it must carry out inspection, to its friends tooling/fixture interval according to the length of the specimen and to set up limit switch equipment. Open the tensile machine mobile phone software, set - Connected to the Internet - Com1, in actual operation. Click set items - before testing Choose - a kind of material Changes ( Choose the type specimen experiment scheme initial main parameters, such as specifications and its thickness, etc. ) 。 Choose - control plan Changes ( Type the detection rate and shutdown mode, etc. ) 。 First the specimen in close to the end of the clip force sensor head, such as power reset after removal of the weight of the specimen, and clamping and end of the specimens, to raise and lower spacing to manipulate jig. Started testing, machinery and equipment may be in accordance with the plan in order to develop the experimental setup, the test is completed, good storage experiment data information. Try after experiment, the right of the screen could display information, with the results of the experiment - click test result Choose - test results Point the output word report, will copy or is stored into the experimental data. Tensile testing machine maintenance way the following: 1, to maintain the daily cleaning of machinery, equipment and computers. 2, avoid damp, high temperature, corrosion, dust and water infiltration equipment or is the interior of the electronic computer. 3, to the equipment to carry out the inspection on time, maintain the consistency of the parts. 4, to the very easy to rust the artifacts or long-term unsuitable parts, such as the jig and plug, etc. , coated with rust inhibitor. 5, maintain the jig shaft rod or jig drag surface clean, prevent a stuttering. Immediate removal of retained in the shaft lever pieces, if the tooth form part of the shaft lever is blocked, to apply wire brush dips in motor gasoline to clean up, pay attention to don't have to hard real-time application special tool to remove. 6, every 2500 hours server based on speed reducer with an oil change. Industrial equipment from essentially all the same, collaboration of different components of the actual operation, only to grasp the appropriate way, just can make all the whole test process flow, test data information is more accurate, above is the experiment of tensile testing machine operation process related to maintenance at ordinary times in detail, looking forward to your help. If you want to learn more about information of tensile testing machine, welcome to the online consulting service or call the company service hotline ( Website top right corner) For consultation, we will wholeheartedly provide high quality service for you! Tags: & nbsp  tensile testing machine
textile testing equipment tensile tester manufacturers, as the name suggests, find extensive use in tensile tester manufacturers institutions. Since tensile tester manufacturers has become much dependent on technology in today's world, there is wide use of such textile testing equipment.
GESTER International Co.,Limited’s goal is to achieve customer satisfaction through excellence in design, supply chain management, manufacturing and repair solutions.
GESTER International Co.,Limited usees sentiment analysis to understand what their customers care about and leverage that information to reposition their products, create new content or even provide new products and services.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...