Tensile
testing machine with strong, the nc machine tool displays within 2000 n can do all of the raw materials ', narrow, bending, from, puncture, such as experiment, the liquid crystal display CNC machine set required main parameters, a strength can interface is shown in the graph, offset, digital display device, connect the computer to complete the whole computer control and print the specification test report;
Change the traditional type
tester machine equipment, heavy raw material and complex operation and characteristics of a single defect.
Exterior chooses squeeze type even the board and senior paint, more show unique.
Maintenance common problems about the tensile testing machine some customers will not grasp, below to let us together to master: 1, before the experiment, it is important to in order to ensure the heating above twenty minutes, and then make temperature drift least harm.
2, hydraulic buffer with cooking oil should be kept clean, aspect ratio is not enough oil cylinder deep two-thirds should be replaced immediately.
3, before starting, check the friction is theme activity location should be filling grease.
4, tensile testing machine before the specimens to support, make sure the braking system of rocker jammed, and relax after good specimens.
5, dynamometer main rolling bearings do not allow to oil.
Transmission wheel rolling friction surface to oil or splashed with oil stains, friction surface should be clean and neat certainly, not to hem arm piece of strong impact on the slope.
After 6, the end of the experiment, disconnect switch power supply, then to test instrument for surface cleaning solution, immediately to carry out safety protection.
7, average every month on tensile machine to carry out maintenance twice.
The perpendicularity of the tensile testing machine is not very good, can not ensure the specimen is thoroughly on the actual meaning of the radial rashin, so immediate harm to the experimental results.
Tensile testing machine verticality deviation can cause tester of decrease;
If it is oil type of hydraulic drive system is also a serious damage.
Verticality deviation will cause tension tester vortex rod friction at work from time to tome noise, increases gear damage.
The interpretation of the above is the tensile testing machine maintenance information, hope can help you, if you want to learn more about information of tensile testing machine, welcome to the online consulting service or call the company service hotline (
Website top right corner)
For consultation, we will wholeheartedly provide high quality service for you!
Tags: & nbsp tensile testing machine
Currently there is a global trend growing. People are more conscious about
tensile tester manufacturers and are seeking alternatives to traditional solutions.
Applied Materials’ mission is to be the leading supplier of
textile testing equipment worldwide-through innovation and enhancement of customer productivity with systems and service solutions.
With the help of a
tensile tester manufacturers textile testing equipment, tensile tester manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.
According to the market analysts, exports from GESTER International Co.,Limited facilities in China will exceed the forecast.
Equipping textile testing equipment with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.
